Soooo ....
Looking to see if this makes sense to anyone else, or just me
Seeing all the issues with batteries, Carts, and Atomizers I started to rack my brain last week and figure out how there may be a way to improve the smoking experience.
These are the "CON'S" of our Current E-Smoking experience and what I will be trying to address/fix ... From what I have seen on the forums at least...
1. Lack of smoke/vapor
2. Atomizers Dying
3. batteries Dying/Charge not lasting more then a few minutes/hours
4. Carts not lasting
5. Not knowing when you have had your fix, and continuing to smoke. (IE: Taking in more nic then you would normally with reg. cigs)
6. God know what you are smoking from the Cart itself. Polyester, etc... ?
These are the 6 problems I will try and address below, and see if I may be on the right track to something.
It seems like the most successful way to e-smoke is through Dripping. By adding a single drop or two to the atomizer itself or adding several drops of e-liquid to the cart. Carts don't last per Manufacturer Specs and some experience a "burning taste", not to mention, going through several carts a day seemingly can cost quite a bit.
Now, imagine if you take the cart completely out of the picture, and just drip.
In ideal world, this is what I would like to see.
An E-Cig that has a chamber/cartridge completely filled with E-Liquid. When time to smoke the e-cig, you press a button (much like the Manual Jenty Switch) and it drips a single drop of e-liquid on the atomizer. You then take 10-15 puffs (equivalent to a single cig) and you're done. Battery shuts off, and is only on the for the time you smoked, thus saving battery life.
So, you would have, not only a longer battery life, but a CRAZY amount of smoke. You would also just refill a single cartridge/chamber when the liquid ran dry. You will also know once you have had the equilvalent of a single cigarette because there would be nothin else to smoke, and it would be consistent across the board. You could set up this type of e-cig to have a timer per say for how long the battery stays on after activating per the switch. Maybe 7-8 minutes.
Now, How hard would it be to make a chamber/cartridge with a valve, that opens/closes at the press of a button and drips on the atomizer itself?
Atomizers are really anyones guess. Some seem to last a day, while others last a couple weeks. If something like what I have stated above starts to work, then only atomizers would need replacing. If a generic atomizer could be made and bought in bulk, I still feel the price of the e-liquid + atomizer would be cheaper then reg. cigs. Then, you take the materials from the Carts (Polyster) out of the picture, and are now just dealing with a liquid itself.
You guys follow what I am trying to say? Ideas? Comments Welcome!
Thanks
Looking to see if this makes sense to anyone else, or just me
Seeing all the issues with batteries, Carts, and Atomizers I started to rack my brain last week and figure out how there may be a way to improve the smoking experience.
These are the "CON'S" of our Current E-Smoking experience and what I will be trying to address/fix ... From what I have seen on the forums at least...
1. Lack of smoke/vapor
2. Atomizers Dying
3. batteries Dying/Charge not lasting more then a few minutes/hours
4. Carts not lasting
5. Not knowing when you have had your fix, and continuing to smoke. (IE: Taking in more nic then you would normally with reg. cigs)
6. God know what you are smoking from the Cart itself. Polyester, etc... ?
These are the 6 problems I will try and address below, and see if I may be on the right track to something.
It seems like the most successful way to e-smoke is through Dripping. By adding a single drop or two to the atomizer itself or adding several drops of e-liquid to the cart. Carts don't last per Manufacturer Specs and some experience a "burning taste", not to mention, going through several carts a day seemingly can cost quite a bit.
Now, imagine if you take the cart completely out of the picture, and just drip.
In ideal world, this is what I would like to see.
An E-Cig that has a chamber/cartridge completely filled with E-Liquid. When time to smoke the e-cig, you press a button (much like the Manual Jenty Switch) and it drips a single drop of e-liquid on the atomizer. You then take 10-15 puffs (equivalent to a single cig) and you're done. Battery shuts off, and is only on the for the time you smoked, thus saving battery life.
So, you would have, not only a longer battery life, but a CRAZY amount of smoke. You would also just refill a single cartridge/chamber when the liquid ran dry. You will also know once you have had the equilvalent of a single cigarette because there would be nothin else to smoke, and it would be consistent across the board. You could set up this type of e-cig to have a timer per say for how long the battery stays on after activating per the switch. Maybe 7-8 minutes.
Now, How hard would it be to make a chamber/cartridge with a valve, that opens/closes at the press of a button and drips on the atomizer itself?
Atomizers are really anyones guess. Some seem to last a day, while others last a couple weeks. If something like what I have stated above starts to work, then only atomizers would need replacing. If a generic atomizer could be made and bought in bulk, I still feel the price of the e-liquid + atomizer would be cheaper then reg. cigs. Then, you take the materials from the Carts (Polyster) out of the picture, and are now just dealing with a liquid itself.
You guys follow what I am trying to say? Ideas? Comments Welcome!
Thanks