**The GALILEO mod....From Goodejuice.com!**
- Thread starter nick78
- Start date
- th_trl_thread_readers 0
- Status
I got the Galileo in September & the JUIS when it was first released a few weeks ago. Not sure what you mean by special requests.
I was thinking in buyt this product for that matter:
ProtectaClear Trial Kit : Everbrite Coatings, Keep Metals Looking Their Best
No, there is not option, it just has a serial number engraved on the buttom.
I think there is (or was) a limited Titanium edition and a Black Aluminum edition also, check my post #630 on this thread:
http://www.e-cigarette-forum.com/fo...alileo-mod-goodejuice-com-63.html#post4581745
From the esigshop site (G1 Regenerable Atom For Galileo - Galileo&Ju.Ic Kit - Galileo/Ju.Ic /637)
G1, atomizer suitable for Galileo only.
This is the real Galileo atomizer, no needing of adaptors to work.
Completely hand made
Simple maintenance and regeneration
Easy to make your own resistance
Easy to build it as you prefer Available for Galileo owners.
If you want to place your order, please specify the nickname you use on the forum, otherwise we have to cancel your
whole order without notice.
I am not sure if it will be available, maybe Nick could answer that.
About the Ju.is, I do not know, I do not own one
Finally finished reading this thread last nite, seems after the ju us was released was not much posted, kinda seems like this G1 is still not out & the thread is deserted? Whats up all you Galileo lovers out there!?!
As far as I know we are still waiting on the g1, the ju.ic is working great for me.
Sent from my myTouch_4G_Slide using Tapatalk
Just got a Galileo w/ juic on the classies. It'll get here some time next week. Any suggestions for someone who hasn't owned a mechanical mod? Looked at the videos - pretty straight forward. Know nothing about juic.. don't even see it on the goodejuice site anymore.
Need some pointers if anyone's able.
Need some pointers if anyone's able.
It allows to adjust how much the buttom contact will arise:
Tightening the screw will squish the O-Ring = less rise of the buttom contact.
Untightening the screw = more rise of the buttom contact.
== The parts ==
* Galileo buttom unassembled
* 1 x O-Ring, ID: 2.8 mm, OD: 6.6 mm, Section: 1.9 mm.
== Assembling it ==
== Adjusting the rise ==
== O-Ring to use The Galileo in Ovetto (egg) mode without magnets ==
The Parts:
* 1 x O-Ring, ID: 13.8 mm, OD: 18.6 mm, Section: 2.4 mm.
* The above buttom adjustement (to allow the arise adjustment of the buttom contact).
== The Galileo porn ==
The Galileo with G-Tank:
The Galileo with iAtty:
The Galileo with his little 18350 brothers:
Tightening the screw will squish the O-Ring = less rise of the buttom contact.
Untightening the screw = more rise of the buttom contact.
== The parts ==
* Galileo buttom unassembled
* 1 x O-Ring, ID: 2.8 mm, OD: 6.6 mm, Section: 1.9 mm.
== Assembling it ==
== Adjusting the rise ==
== O-Ring to use The Galileo in Ovetto (egg) mode without magnets ==
The Parts:
* 1 x O-Ring, ID: 13.8 mm, OD: 18.6 mm, Section: 2.4 mm.
* The above buttom adjustement (to allow the arise adjustment of the buttom contact).
== The Galileo porn ==
The Galileo with G-Tank:
The Galileo with iAtty:
The Galileo with his little 18350 brothers:
Last edited:
I had that happen too....problem was that I didn't have the connector properly seated into the juis.
Once I pushed it down in there snugly....no further problem...
- Status
Similar threads
