The Heatvape Sniper sub-ohm tank - top-filling/top AC

[raitizz]

For you sub-ohm clearotank enthusiasts, yet another has hit the market, the Heatvape Sniper, if you didn't know already
Top-filling, air-holes at the top, too...

Aaaand...."Vape storm!!!"

Thanks,
R

 

[MikeB2Shady]

Thanks for posting. I'm going to wait on this cause the Chinese are just getting back to work. I'm sure March is going to be eventful for everyone. Plus, I've already got the Delta II tank which I love and the Arctic, which is a beast! These other tanks are going to have to step up big time to beat the Arctic from the flavor, to vapor production, to the power...All the way down to real kanthal and real organic cotton. People are already going over the recommended 100w with this tank without a dry hit. They've got every consumer covered for coils. From 1.2ohm single coil, all the way down to 0.2ohm dual coils.

If anybody can take the limelight away from the Arctic, it would be Aspire or Kanger....We just have to wait and see what they have up their sleeves. More competition is good for all of us....not good for our wallets though

 

[vincom]

i cant keep up w/all the new tanks coming out, and they all "seem" great, time will tell

 

[Eric Auer]

I don't Sub ohm, But I would like a top filling tank with long lasting affordable coils and a RBA option.

And it would be nice if you could leave it on its side for a while with no leaks.

I don't think I'm being unreasonable am I?

Eric

 

[vincom]

I don't Sub ohm, But I would like a top filling tank with long lasting affordable coils and a RBA option.

And it would be nice if you could leave it on its side for a while with no leaks.

I don't think I'm being unreasonable am I?

Eric

subtank mini doesnt leak whichever way u put it and doesnt need to use a subohm coil as u can make a coil at any resistance u want.

 

[Eric Auer]

subtank mini doesnt leak whichever way u put it and doesnt need to use a subohm coil as u can make a coil at any resistance u want.

It is an option but I really would like a top fill tank as I stated.

Going to have to wait and see how people like things and what else is coming out...

Luckily I'm not desperate for any new vaping gear.

But it's fun all same to see new stuff.

Eric

 

[obiz]

It looks like top filling require needle bottle?

 

[Wilazn]

subtank mini doesnt leak whichever way u put it and doesnt need to use a subohm coil as u can make a coil at any resistance u want.

Mines been consistently leaking out of the air holes.

 

[vincom]

Mines been consistently leaking out of the air holes.

urs might be but not typical, theres def something wrong w/urs, does it do it for occ or rba.
for occ this might work Kanger Subtank Leak Fix and Troubleshooting
i have 2 minis and only using the rba no leaks

 

[Wilazn]

urs might be but not typical, theres def something wrong w/urs, does it do it for occ or rba.
for occ this might work Kanger Subtank Leak Fix and Troubleshooting
i have 2 minis and only using the rba no leaks

It happens when I use the occ. Maybe I have a bad coil? It's with 80 VG juice also so I find it odd.

 

[Shel]

Mines been consistently leaking out of the air holes.

urs might be but not typical, theres def something wrong w/urs, does it do it for occ or rba.
for occ this might work Kanger Subtank Leak Fix and Troubleshooting
i have 2 minis and only using the rba no leaks

I've been using a Kanger Sub Mini and a Sub Nano, and haven't had it leak a drop out of either one! ONLY time I need to wipe them is after I refill them, sometimes juice gets on the outside. Wonder why yours leaks? As Vincom asked, are you using the OCC or RTA?

While it's great that all of these new tanks are coming out, what blows is that you end up needing to purchase specific coils for each one of them! It's too bad that they don't settle on a specific size, so that they'd be interchangeable.

Right now, I'm really loving the Sub tank! Great flavor, great billows of clouds... but knowing me, I"m always on the look-out for the next great thing!

 

[Wilazn]

I was about to sell mine since the leaking was bothering me so much. I have the subtank mini, delta 2, and the Atlantis and only my subtank leaks.

 

[Bammer555]

I was about to sell mine since the leaking was bothering me so much. I have the subtank mini, delta 2, and the Atlantis and only my subtank leaks.

Your not alone mine does as well and there have been others posting about it. Mine stays at home most of the time, can't stand getting juice all over my car. In reality it's coming from the juice holes which is most likely from flooding but new or old coils it always leaks.

 

[Wilazn]

Your not alone mine does as well and there have been others posting about it. Mine stays at home most of the time, can't stand getting juice all over my car. In reality it's coming from the juice holes which is most likely from flooding but new or old coils it always leaks.

Yea I figured it was from the coil being flooded. It's a shame too. I really like it. It has better flavor than my Atlantis and more capacity than my delta.

 

[Wilazn]

Anyways. I don't really see any info on this Heatvape Sniper. I Google it and the only results I got was this post, the official website, and a YouTube video of an Asian guy blowing clouds for 3 minutes.

 

[raitizz]

Yeah, nothing much out there...

R

 

[sapples]

So no more opinions on this tank yet? Thinking of ordering one since I cant find the Arctic in stock anywhere :/

 

[raitizz]

So no more opinions on this tank yet? Thinking of ordering one since I cant find the Arctic in stock anywhere :/

Not much folks have them presumably. You could go for it and report

R

 

[johnlacie]

Found a Heatvape Sniper Review. Seems very innovative having a top airflow and top filling. I wonder how the coil and wick are built inside the coil head. The reviewer recommends it but for me, it is just too wide at 25mm.

 

[BigEgo]

Top fill is overrated. I watched a review of the Lemo 2 (top fill) and it took the guy like 3-4 minutes to fill it. What's the point? With the STM, you just unscrew the base and dump juice in. Takes 20 seconds.