If you do a search on e-bay for "glow in the dark o ring 5/8" it's the first result.
- Status
If you do a search on e-bay for "glow in the dark o ring 5/8" it's the first result.
How about some splash anodizing ? Seems like the skys the limit when it comes to styles.
And maybe a short top cap for those who want to show off there juice.
And maybe a short top cap for those who want to show off there juice.
I have come to the conclusion that I suck at wrapping coils. Watched Zens coil basics tutorial and that man is a master. I had been trying to wrap it differently so hopefully I'll have better luck when I get off work. I've only had it up and running for like 5 min before I had a coil pop last night and that was at like 2am.
It shouldn't leak unless you try and attack someone with it
lol, I find that out also. I tell you what my solution was. I had a mini blow torch. I oxidized the wick like crazy and was still popping coils. I read on OB's thread for coil tricks and someone that had the same problem recommended a better torch. I went yesterday and bought an upgraded torch for like $25. It completely worked!! I wrapped a coil with ease, perfect glow and all. Even though your torch might look like its oxidizing it, it will not matter how long you do it if the torch isnt burning at very high temps
This is my conclusion can anyone tell me how i would be able to aquire a ihybrid or who the distributor is,
could someone pm me with any information, would be greatly appreciated
thanks
could someone pm me with any information, would be greatly appreciated
thanks
Per ECF, it is not allowed to post distributor in this thread. I'm not sure if I can PM you the link, so I will not take that chance until I get it clarified through ECF. Hope everyone understands
I will have 15-20 available to ship tuesday, I will start a list later tonight, hope that helps ya 
Lighthound also carries glow in the dark o-rings.
Good morning (afternoon) all!
Good morning (afternoon) all!
its the round thing your positive screw tightens into
Thank you. I'll start with the inside screw before I mess around with the post. It's still vaping very well. Just didn't wanna mess with it without your guidance
I wasn't intending to snap or be snappish, and I wasn't talking to you in particular, even though I quoted your post.....I only quoted it because you mentioned the batt and since I post a pic of my batt and gap, I was simply trying to say that the gap occurs regardless of the batt. However it may be a smaller gap if using a flat top batt cause that would make sense due to not having an erect nip to poke out.
I was in a hurry to get out the house and to work and didn't have time to read before posting, so perhaps being so blunt made it seem I was in attack mode when I wasn't
Thanks faceless. I'm using a good cooking creme brûlée torch. Anyone else using this with success? Just don't wanna spend the extra cash if I don't have to. I'm getting married at the end of next month and money is really tight. Only reason I could afford the iHybrid is that I sold off some old vaping gear to cover the re cost.
I like erect nips...I wasn't intending to snap or be snappish, and I wasn't talking to you in particular, even though I quoted your post.....I only quoted it because you mentioned the batt and since I post a pic of my batt and gap, I was simply trying to say that the gap occurs regardless of the batt. However it may be a smaller gap if using a flat top batt cause that would make sense due to not having an erect nip to poke out.
I was in a hurry to get out the house and to work and didn't have time to read before posting, so perhaps being so blunt made it seem I was in attack mode when I wasn't
congrats on marriage. you have a butane torch? that will work. i've had those in the past (cant find mine now) but i have a propane torch and it's a beast, cheaper, and stronger than butane imo
You want the black one that sits an inch tall and has a .03" wire, cut it in half
It works perfect!!I have a feeling I'm gonna buy all kinds of o rings lol
Thank you. I'll start with the inside screw before I mess around with the post. It's still vaping very well. Just didn't wanna mess with it without your guidance
lol, it should work, I tightened all the other ones but not the prototypes, my mind was going 1000 mph lol
It shouldn't leak unless you try and attack someone with it
i find rolls of nickels or quarters in your fist works better
I've got some of those and try as I might I couldn't get them to glow in the dark, went from inside in bright sunlight to a dark closet and nuffin, so with no glow in the dark they just look a dingy white. In the drawer they went, got mine on ebay when the were posted in the HoH thread a loooooooonnnnnnnnng time ago. Now I have red/green/blue/white/glow in the dark/black.....but really only use black and green at the moment. :")
Looks like my Ihybrid my ZAP and my Pluid will be getting here today
Congratz.....we are prepared with plenty of answers. (not sayin if they are correct answers, that's the part you gotta figure out, what works for you
)
It shouldn't leak unless you try and attack someone with it
i find rolls of nickels or quarters in your fist works better
Brass knuckles work best
Sent from my Galaxy Nexus using Tapatalk 2
- Status
Similar threads
- Locked
