Just don't give up, once you know the set up than it's simple.
Sent from my Galaxy Nexus using Tapatalk 2
- Status
Just don't give up, once you know the set up than it's simple.
Sent from my Galaxy Nexus using Tapatalk 2
I don't pull the vapor from the coil I kinda slowly let it come to me.
And I draw from my lungs not my mouth.
I tried a carto last week and I couldn't pull the vapor from it with my lungs.
It was too stiff of a draw.
Sent from my Galaxy Nexus using Tapatalk 2
It's already gotten easier. I REALLY want to like genesis mods so I think I'll hang in there.
Sent from my iPad using Tapatalk HD
I'm in the same boat, the draw is super airy. The flavor is there but its super airy.
Off to wait for wire so I can make a new coil.
Think we need to get used to it, unless we're both doing something wrong.
Thanks Gruss
Thanks, I havent been able to get around to it
Bad day with the iHybrid. No flavor, very airy vapor. I literally get a better hit of a boge carto on an ego.Don't know what I'm doing wrong. I have a well oxidized coil and no hot spots on the coil. It ended up leaking out all in my pocket at my sisters baby shower. So embarrassing. Came home and rewrapped a new coil no hot spots but still no flavor and vapor. I'm taking 6-8 second draw just to get a somewhat satisfying hit and because I'm taking such long draws that my pinky is killing me. I literally have indents. My 18650 tube was supposed to be in today ( mine was the one with the threads that were not right) but I didn't realize it needed a signature so it won't be here till Monday. Not Faceless' fault but it was just the one thing I was looking forward to after a frustrating day. I really want this device to work and work well but all this hassle without any payoff is really discouraging. Here's a pic of my wick and coil. If anyone has ANY sort of advice it would be much appreciated.
Sent from my iPad using Tapatalk HD
Your wick is too tall, its touching your top cap, it needs to be trimmed below screw, feel your top cap when vaping, is it hot? May be causing a small short
Side note: The only complaint I'm getting is the spring, I will be changing that, sorry for the spring lol, but it can be easily changed to anything you want, just unscrew the screw on the switch and change the spring to one you desire. Its very hard finding the spring I need from a supplier
Thanks faceless I got it. Anyone know the dimensions of the Zen magnets? Inside hole, diameter of the whole magnet, and thickness? They are out on the HOH site and was wondering if I might be able to scrounge some up online.
Sent from my iPad using Tapatalk HD
Sent from my iPad using Tapatalk HD
It will get better! I hated my zen at first. Now I can't use anything but gens!
Thanks Gruss
Thanks, I havent been able to get around to it
Your wick is too tall, its touching your top cap, it needs to be trimmed below screw, feel your top cap when vaping, is it hot? May be causing a small short
Side note: The only complaint I'm getting is the spring, I will be changing that, sorry for the spring lol, but it can be easily changed to anything you want, just unscrew the screw on the switch and change the spring to one you desire. Its very hard finding the spring I need from a supplier
Ah. Below the screw.
I think I just found my short. LOL
Vapor and flavor are good, but the juice is dark and I'm not even down half a tank.
And, the top cap is getting warm.
My wick is even/just a hair below the top of the screw.
I need to trim off a little then to get it below the screw.
I'll try that and see if it helps.
Yeah, the wick is heating up your top cap
Let me know how it works for you, I have my wick even with where the top screw starts to thread 
I may have to re-wrap. In the morning though, I'm just gonna vape it tonight.
It's better, but the top is still getting hot.
I can't go any lower though with this wick without redoing the wire.
It's better, but the top is still getting hot.
I can't go any lower though with this wick without redoing the wire.
I got my Ihybrid out of the mailbox thursday evening on my way to work and really didn't get to play with it till friday night.I roasted some 325 and rolled a wick to fit and roasted it again,put on 4 wraps of kanthal 32,and promptly popped the coil.I rewrapped and promptly popped it again.Rewrapped,success!vapes great!!Today the vape was wimpy,even on a fresh 18650 so I pulled the wick,burnt the e-juice off,wrapped it again,Viola!Big clouds of tasty vapor!It musta been shorting to the top cap or wick hole,cause it hits much stronger now.The small phillips head screw makes a easier draw too.Good job faceless!
Thanks! With that terrible spring sometimes you have to angle the push lol, spring issue is fixed, sorry about that terrible spring. Thank goodness it can be fixed for about 30 cents lol. I wish I could find magnets, I would love to try them out but the new spring is perfect!! Once I get caught up I will probably ship them out to the first 50, or you can buy them from keegan right now lol
Hey,
I don't have mine yet so I don't know the size but all my switch magnets from here:
Gaussboys Super Magnets - Neodymium Magnets and Rare Earth Magnets
GGTS magnets are these for reference(also work in Katana) Not sure on your screw size.
D6-3.5x2mm N38 NiCuNi Plated Ring Magnet
I don't have mine yet so I don't know the size but all my switch magnets from here:
Gaussboys Super Magnets - Neodymium Magnets and Rare Earth Magnets
GGTS magnets are these for reference(also work in Katana) Not sure on your screw size.
D6-3.5x2mm N38 NiCuNi Plated Ring Magnet
I don't own a katana so I cant measure it lol. Keegan has calipers and magnets, I'm sure he can help out once he reads it
Yeah, the wick is heating up your top cap
Ya know...., I thought mine was doing just fine.. until I read that. I adjusted mine so it sits just a tad lower and WOW! That just proves I have yet to learn more... I'm humbled... Thx Face!!
Once my iHybrid lands I'm sure this site will have the right magnets but I'll have to caliper your screw.
Just saying these so far have been one size fits all for all the devices I've changed over to magnet switches, GGTS and Katana. I still have like 80 of them left so I'll tell you if they work. They seem to make a significant difference in the current transfer as in both those devices the switch bottoms out on 3 magnets and makes a very solid connection.
Not sure if they'll work with the iHybrid but always worth trying
Just saying these so far have been one size fits all for all the devices I've changed over to magnet switches, GGTS and Katana. I still have like 80 of them left so I'll tell you if they work. They seem to make a significant difference in the current transfer as in both those devices the switch bottoms out on 3 magnets and makes a very solid connection.
Not sure if they'll work with the iHybrid but always worth trying
Once my iHybrid lands I'm sure this site will have the right magnets but I'll have to caliper your screw.
Just saying these so far have been one size fits all for all the devices I've changed over to magnet switches, GGTS and Katana. I still have like 80 of them left so I'll tell you if they work. They seem to make a significant difference in the current transfer as in both those devices the switch bottoms out on 3 magnets and makes a very solid connection.
Not sure if they'll work with the iHybrid but always worth trying
Those wont work, I just checked, the post they have to slide over is .24" and OD is .48-.50"
You can send me money if you want lol
rewick/coil just now.
How is that working? Wick looks like it might touch top cap but maybe just shy
I will. No Dwolla though. Can I paypal you to the same account as the original?
- Status
Similar threads
- Locked
