The iHybrid APV - A fully Customizable Genesis

Status
Not open for further replies.

xmpx

Senior Member
ECF Veteran
Verified Member
Jul 7, 2012
98
58
FL
Now that's my kinda stalking!!!!

just left the PO, got it all sorted on trucks. now just gotta wait for buddy to start his route. he knows me already from the handful of times i've stopped by him on his route to get stuff. he parks at the end of every street, walks to the end and back. gives me plenty of time to scout him out, and stop him when he's returning to his truck. mwahahahahha. now only if i can get to him before class at 12:30 :X
 

murtcepS

Unregistered Supplier
ECF Veteran
Jan 6, 2010
962
988
Michigan
just left the PO, got it all sorted on trucks. now just gotta wait for buddy to start his route. he knows me already from the handful of times i've stopped by him on his route to get stuff. he parks at the end of every street, walks to the end and back. gives me plenty of time to scout him out, and stop him when he's returning to his truck. mwahahahahha. now only if i can get to him before class at 12:30 :X

I have a visual of you rifling through boxes on the abandoned mail truck. MWAHAHAHAHHA!!
 

Ezkill

Ultra Member
ECF Veteran
Verified Member
Jun 26, 2012
2,306
2,642
Los Angeles
Not much. Have to get my torch back from my friend. Got a tank short and it popped the top coil...figured just pulling the wick out and burning some VG into it might be enough to fix it but no such luck. Haven't had one of those in a while on any device they are my least favorite of the shorts.

I'll have to re-oxidize this wick around the tank area.
 

DukeBlue

Ultra Member
ECF Veteran
Verified Member
Jul 1, 2012
1,424
2,419
NC
So whats new in the Ihybrid world? :p

Another new iHybrid user just received there special delivery!
Pluid and cutter sold separately LOL.

20120904_131732.jpg
 
Last edited:

sanjosse

Ultra Member
Supporting Member
ECF Veteran
Verified Member
Mar 23, 2010
2,384
5,137
San Jose, CA
Here's what I got in the mail this morn'.

FACELESS

I can't thank you enough for endowing me with such a fine piece of machined wonderfulness :)

sanjosse-1-2012-09-04.jpgsanjosse-2-2012-09-04.jpgsanjosse-3-2012-09-04.jpgsanjosse-4-2012-09-04.jpg

I'm at work so I kinda had to cobble it together to get it working. I took a previously used mesh (not the right length) from my Genisis LV, rerolled it fatter, that worked. Luckily I had some kanthal in my emergency PV kit. Wrapped a 3/4 wick on it… hit the button, sweet, no hot spots first try (pat myself on the back). Then I had to figure out how to get juice in without a syringe, hmmmm. Success! I took a air-can tube, cut in half, stuck it in a 10ml squeeze bottle of RY4. Removed both allen screws, and the coil and wick assembly and proceeded to fill it thru the wick hole. Screwed the assembly back on and I was good to go.

I gotta say this thing hits like a locomotive! And the taste is clean and clear.

Kudos FACELESS!

PS. If you need AAANYTHING, I'm your be-aatch! Thanks Again!
 

Phr0stByte

Ultra Member
ECF Veteran
Verified Member
Sep 30, 2011
1,062
2,242
Virginia is for vapers
Here's what I got in the mail this morn'.

FACELESS

I can't thank you enough for endowing me with such a fine piece of machined wonderfulness :)

View attachment 132029View attachment 132030View attachment 132031View attachment 132032

I'm at work so I kinda had to cobble it together to get it working. I took a previously used mesh (not the right length) from my Genisis LV, rerolled it fatter, that worked. Luckily I had some kanthal in my emergency PV kit. Wrapped a 3/4 wick on it… hit the button, sweet, no hot spots first try (pat myself on the back). Then I had to figure out how to get juice in without a syringe, hmmmm. Success! I took a air-can tube, cut in half, stuck it in a 10ml squeeze bottle of RY4. Removed both allen screws, and the coil and wick assembly and proceeded to fill it thru the wick hole. Screwed the assembly back on and I was good to go.

I gotta say this thing hits like a locomotive! And the taste is clean and clear.

Kudos FACELESS!

PS. If you need AAANYTHING, I'm your be-aatch! Thanks Again!
You are SOOOO going to love this...
 

DukeBlue

Ultra Member
ECF Veteran
Verified Member
Jul 1, 2012
1,424
2,419
NC
Here's what I got in the mail this morn'.

FACELESS

I can't thank you enough for endowing me with such a fine piece of machined wonderfulness :)

View attachment 132029View attachment 132030View attachment 132031View attachment 132032

I'm at work so I kinda had to cobble it together to get it working. I took a previously used mesh (not the right length) from my Genisis LV, rerolled it fatter, that worked. Luckily I had some kanthal in my emergency PV kit. Wrapped a 3/4 wick on it… hit the button, sweet, no hot spots first try (pat myself on the back). Then I had to figure out how to get juice in without a syringe, hmmmm. Success! I took a air-can tube, cut in half, stuck it in a 10ml squeeze bottle of RY4. Removed both allen screws, and the coil and wick assembly and proceeded to fill it thru the wick hole. Screwed the assembly back on and I was good to go.

I gotta say this thing hits like a locomotive! And the taste is clean and clear.

Kudos FACELESS!

PS. If you need AAANYTHING, I'm your be-aatch! Thanks Again!


Nice ingenuity Sanjosse, on getting setup at work. I got mine today also and I’m just sitting here admiring the beauty. I will set it up in just a bit.
 

Ezkill

Ultra Member
ECF Veteran
Verified Member
Jun 26, 2012
2,306
2,642
Los Angeles
I still never got my Pluid... It said missent and currently its been sitting at the USPS sort facility for four days in my city..

Ughhhhhhhhhh.

They'll get it to you, it's just a matter of time. I really hate this missent garbage.

I mailed a package to Hawaii and it shows up for delivery back to my postal code in 2 days...after it had already departed my postal code. Was it a mail label mistake? Nope, post office missent.
 

maleko

Ultra Member
ECF Veteran
Verified Member
May 8, 2012
2,362
5,920
Salt Lake City
Ughhhhhhhhhh.

They'll get it to you, it's just a matter of time. I really hate this missent garbage.

I mailed a package to Hawaii and it shows up for delivery back to my postal code in 2 days...after it had already departed my postal code. Was it a mail label mistake? Nope, post office missent.


Lol well I am going to the Post Office in a min for a money order so I will see whats up. :laugh:
 

DukeBlue

Ultra Member
ECF Veteran
Verified Member
Jul 1, 2012
1,424
2,419
NC
I’m all set up and enjoying life now thanks Faceless! :toast: It only took 1 try to get right, no blown coils as others have had. I set it up with a 30 awg kanthal 4/5 coil on a 400 mesh wick that hits hard, I’ll try a 3/4 next time but I’m satisfied with 4/5.
I am LOVING my iHY!:D Now all I need is some colored tubes, so sad I couldn’t get one of the limited edition green sets to go with my pluid.


iHysmoking-1.jpg



iHy18350Trippy.jpg
 
Status
Not open for further replies.

Users who are viewing this thread