I agree with Amber, happens to me with not a high enough setting. I usually just run a toothbrush over the coil to get the gunk off
Heres the one I use, 9 bucks http://www.harborfreight.com/micro-torch-42099.html
- Status
I have a few
PMing now
i use a propane torch, gets it done in idk, 10 seconds jack frost before rolled. i would recommend one over butane. propane tanks are 1)cheaper, 2)bigger flame, and 3) last tonnns longer. i used to use a butane to heat titanium and the propane makes the butane torch look like a pen torch. don't bother with a lighter. i also quenched with juice 3 or so times before i wrapped. watch zen's basic coil wrap video. it's short and to the point
Just ordered the RED tubes ..Faceless olso sending a "spring and top cap" as I have the old version..TOP BLOKE..
Would of loved the green but hey...great device.
if you have a spare green set ...pm me..
Would of loved the green but hey...great device.
if you have a spare green set ...pm me..
I am putting my iHybrid on the classies. Nothing wrong with the device itself. Just that I broke my pinkie a while back in an accident and I have decided that the bottom switch is not for me as they make my hand ache. I have tried multiple devices with bottom switches and come to the conclusion that I will have to live with a side switch.
I think it happens naturally, every time my tank is half full or less, I tilt the juice so it doesn't touch the wick.
Pretty much dry burn the carbon off.
I don't know if it's really carbon, but thats what I call it.
Sent from my Galaxy Nexus using Tapatalk 2
I personally only use my middle finger to activate the button.
I sometimes press it against the palm of my hand.
Sent from my Galaxy Nexus using Tapatalk 2
Thanks everyone for your input. If I decide to brave the garage, I might even find the old one my dad had that I learned to solder with years ago, would need a new bottle of course.
Out of town for biz meeting / dinner and missed all the fun the other night. Gratz to Wharf and Nancy. Big kudos and thanks to Faceless for doing what he does. He is full of awesomesauce.
Do yourself a favor and get a good Chef's torch - that way you'll use it to make wonderful wicks and you can justify it by using it in the kitchen as well
Oh ooks like i missed a couple contests.. Congrats to the winners!!! Nice job Face!!!
PM the APV manufacturer. 
Some juices are worse than others, but there are 2 main causes I've experienced..
1 - Coil is too lose on the wick (they shouldn't be "tight" but touching), and the liquid boils instead of vaporizing
2 - It is over-wicking causing the same problem as above.
If the coil looks good, firing at your typical vaping angle with the top cap off will give you a really good idea as to what is going on. If its overwicking, pinch off the very top of the wick, or reduce your angle of attack..
Some juices are worse than others, but there are 2 main causes I've experienced..
1 - Coil is too lose on the wick (they shouldn't be "tight" but touching), and the liquid boils instead of vaporizing
2 - It is over-wicking causing the same problem as above.
If the coil looks good, firing at your typical vaping angle with the top cap off will give you a really good idea as to what is going on. If its overwicking, pinch off the very top of the wick, or reduce your angle of attack..
I tried that and it felt awkward to me. In the end I decided to get sell it to someone who would appreciate it more than I do. From now on I will be sticking with side button devices.
PM the APV manufacturer.
Some juices are worse than others, but there are 2 main causes I've experienced..
1 - Coil is too lose on the wick (they shouldn't be "tight" but touching), and the liquid boils instead of vaporizing
2 - It is over-wicking causing the same problem as above.
If the coil looks good, firing at your typical vaping angle with the top cap off will give you a really good idea as to what is going on. If its overwicking, pinch off the very top of the wick, or reduce your angle of attack..
it was boiling, now I wrapped it up again on a 3/2 wrap and it produces too much vapor lol, thanks for the reply, the boiling helped me figure the cause
it was boiling, now I wrapped it up again on a 3/2 wrap and it produces too much vapor lol, thanks for the reply, the boiling helped me figure the cause
Glad it helped. Watching what happens with the cap off can help solve pretty much any issue you can have with a genesis atty..
I HATE the Giants. I mean really HATE the Giants. LOVE the Cowboys!
Ok I know a balloon test was done and it worked. So I tried to blow through the tube and I couldn't seem to blow air out. I decided to use my dremel and a cutoff wheel and make some notches on the bottom of the switch screw and tried again. I could hear air coming out pretty good. Anyways go steelers.
- Status
Similar threads
- Locked
