I'm just in shock at how thick it is. Not viscosity wise....but the after taste. Hard to explain. I didn't get the 24. Just the 10. I'm normally at 6mg, so 10 is high to me. But, it's soooooo good!
- Status
I'm just in shock at how thick it is. Not viscosity wise....but the after taste. Hard to explain. I didn't get the 24. Just the 10. I'm normally at 6mg, so 10 is high to me. But, it's soooooo good!
the new switch will hold them perfect
Yes, quit sucking so hard
Gmail checked, I sent your tank rings, I know for a fact I did, maybe forgot the tank sleeve, I put battery tubes as a bonus. So.....since this is becoming a headache for me and being put in my thread, let me explain..... dont mistake my kindness for weakness. If someone messes up yalls parts, it is not my fault, and I dont have to send new parts, so 2nd hand work is not going to be my responsibility, I do not sell extra battery tubes, battery sleeves, switches. If they do not work for machining reasons, then They can be shipped to me for replacement. I make 50 switches at once, 50 tubes at once, 50 atty parts at once, if I ship 1 part it disables a whole unit. I may be the wrong person to be frustrated with, I did not cause this problem.
Your kindness is what keeps all here Face. You do a hell of a job, and are truly appreciated by all in this thread. Especially yours truly
I appreciate all your hard work face I know you have more on your plate than anyone else could handle and think you do a great job with production
I know you have more on your plate than anyone else could handle and think you do a great job with production 
Your kindness is what keeps all here Face. You do a hell of a job, and are truly appreciated by all in this thread. Especially yours truly
Thanks
I havent forgot you either lol, I have everything wrote down on a bulletin board. I shipped your black tubes with the green envy LOL, ok, I havent forgot about the contest either. I owe you an deviant red tubes still
the new switch will hold them perfect
Gmail checked, I sent your tank rings, I know for a fact I did, maybe forgot the tank sleeve, I put battery tubes as a bonus. So.....since this is becoming a headache for me and being put in my thread, let me explain..... dont mistake my kindness for weakness. If someone messes up yalls parts, it is not my fault, and I dont have to send new parts, so 2nd hand work is not going to be my responsibility, I do not sell extra battery tubes, battery sleeves, switches. If they do not work for machining reasons, then They can be shipped to me for replacement. I make 50 switches at once, 50 tubes at once, 50 atty parts at once, if I ship 1 part it disables a whole unit. I may be the wrong person to be frustrated with, I did not cause this problem.
You're right, you can't be responsible for what happens when it's out of your hands.
You have been extremely generous with a few replacements you've made because you're a nice guy. However, I know it's costing you money and creating issues in your production. Warranty is warranty but after market work is not your problem. I don't think there is anyone in this thread who could honestly say you haven't stepped up and gone above and beyond to correct any issue that has been yours.
I can't say what K-man and Ez did any better so not gonna try, but Face remember we might love your work but we care about you also, you have been great to ALL of us.
Thanks
LOL, ok, I havent forgot about the contest either. I owe you an deviant red tubes still
I know you won't. Lol but don't forget the red ones I sent back too! I thought my Murdock LE shipped already? I had a few shipping notices from you and lost track of what was coming.
Edit....oops didn't see "shipped" past tense
I know you won't. Lol but don't forget the red ones I sent back too! I thought my Murdock LE shipped already? I had a few shipping notices from you and lost track of what was coming.
Edit....oops didn't see "shipped" past tense
It shipped with all the others
I just put your black tubes in there as I have a bunch of them now I just havent posted them on site yet. I got your red ones on my list, I also have green on my list for you I also put it as a microphone instead of metal tubes to see if customs was the hold up
I apologize for the additional stress and drama. I should probably just buy a bunch of parts from you and then you won't have to deal with anything when it goes wrong. You have been incredibly forgiving and helpful and it's appreciated. Again, I apologize for the additional stress.
The thread rings are small and very light make sure they didn't get tossed with packaging......a thanks for the tubes is in order and the rest have no idea...lol.
Faceless, I, for one, can't believe the pace you keep. At the same time staying this affable, generous dude. In fact, I think it's time to change my sig... I am a Hybreed.
Sent from my Galaxy Nexus using Tapatalk 2
Sent from my Galaxy Nexus using Tapatalk 2
Gmail checked, I sent your tank rings, I know for a fact I did, maybe forgot the tank sleeve, I put battery tubes as a bonus. So.....since this is becoming a headache for me and being put in my thread, let me explain..... dont mistake my kindness for weakness. If someone messes up yalls parts, it is not my fault, and I dont have to send new parts, so 2nd hand work is not going to be my responsibility, I do not sell extra battery tubes, battery sleeves, switches. If they do not work for machining reasons, then They can be shipped to me for replacement. I make 50 switches at once, 50 tubes at once, 50 atty parts at once, if I ship 1 part it disables a whole unit. I may be the wrong person to be frustrated with, I did not cause this problem.
If you had a problem with selling me a couple parts you should of said so 3 weeks ago when I inquired. You had me send parts to Texas so you could evaluate the issue. I offered to pay for the parts you said I needed. Now I see your not in the business of selling parts...WHY DIDN'T YOU SAY SO 3 WEEKS AGO? The lame excuses for not shipping the package out the past 2 weeks make sense now....You were just stringing me along weren't ya? You really need to be up front in the future Clinton.
If you had a problem with selling me a couple parts you should of said so 3 weeks ago when I inquired. You had me send parts to Texas so you could evaluate the issue. I offered to pay for the parts you said I needed. Now I see your not in the business of selling parts...WHY DIDN'T YOU SAY SO 3 WEEKS AGO? The lame excuses for not shipping the package out the past 2 weeks make sense now....You were just stringing me along weren't ya? You really need to be up front in the future Clinton.
speaking of giving!! Good luck folks!!
http://www.e-cigarette-forum.com/fo...id-dragon-contest-name-shirt.html#post7562394
I apologize for the additional stress and drama. I should probably just buy a bunch of parts from you and then you won't have to deal with anything when it goes wrong. You have been incredibly forgiving and helpful and it's appreciated. Again, I apologize for the additional stress.
I didnt have a problem, but it has become one, I didnt string you along and you shouldnt bring problems not created by me into my thread. There was also no problems with the parts you returned, you said so yourself and you know what I'm talking about, do not post outside issues in my thread, take them to the source of the problem. I am always up front with any issues I have, and now I'm being up front with the issue its causing me to send extra parts for someone elses error. I know you follow this thread and have read if you have issues to PM me or email me, that rule still applies.
After waiting 2 1/2 weeks for my parts to be returned I kind of ran out of patience....I'm sure you understand. You said you were going to include the parts I needed. Very disapointed in the way this turned out.
- Status
Similar threads
- Locked
