The iHybrid APV - A fully Customizable Genesis

[Vapor2112]

Ody is on my short list (ie the only thing on it) of non genesis wants...
Gonna have to let me know how you think it compares to the Penny..

Same here buddy. I will pay a bit above retail for no waiting in line, but that's about it. Luckily for me, there are still great sellers, you being one of them, that don't gouge people on sales. The Ody will arrive just in time for my trip this weekend.

 

[MaxPerilous]

Well howdy all. Happy Halloween!!!

I'm at work... But I brought the kid with me and set her loose on the neighborhood cause its pretty nice and they always have good handouts lol. She brought one bag in and i told her good. Just poor it out right here by me and go get another one!!

I think its funny people stop trick or treating when they get older, or stop handing out candy to the teens. If I am not working I go trick or trating still as an adult!! lol

Last year I went as the bearded lady. My beard put Zen~'s beard to shame. I've since cut it off but was that so much fun!!

 

[Schneck]

Same here buddy. I will pay a bit above retail for no waiting in line, but that's about it. Luckily for me, there are still great sellers, you being one of them, that don't gouge people on sales. The Ody will arrive just in time for my trip this weekend.

Sounds good you are VIP in my book half of my great collection is in your possession now.....lol........tryed your advice on penny and definately a little powerhouse......not sure if its leaving but still not fond of he setup process yet but getting better ...just wish the tank was bigger ....the best would be the draw and th of the penny but tank of the oddy ...the oddy is probly one of the smoothest vapes I've had ,,

 

[LongHaul]

Do any local stores carry nichrome or kanthal wire?

Elite vaporworks has kanthal that ships pretty fast

 

[digunderground]

popped my last coil... now i'm out of kanthal.

i hate to be like this, but this literally my whole vaping budget is tied up right now..

if anyone has like an extra foot of kanthal they can send me pm me for address.

until then stuck with a regular 510 atty on my paps >_>

Ill pm in a second.. checking what I got for you.

 

[WNCmotard]

Ody is on my short list (ie the only thing on it) of non genesis wants...
Gonna have to let me know how you think it compares to the Penny..

Yeah, I'll definitely let you know what I think of it, should be here tomorrow.

 

[K-man]

Ya got a 18650 and got the wife a 18350 will get her away from her box mod and tank if it kills me ....lol. if this don't work I'm done trying

Damn I missed it! I wanted an 18350 bad! Congrats man

 

[WNCmotard]

Sounds good you are VIP in my book half of my great collection is in your possession now.....lol........tryed your advice on penny and definately a little powerhouse......not sure if its leaving but still not fond of he setup process yet but getting better ...just wish the tank was bigger ....the best would be the draw and th of the penny but tank of the oddy ...the oddy is probly one of the smoothest vapes I've had ,,

LOL thanks buddy, they all have a good home here, and get used daily. The paps is sitting beside me with your old DID on it, I just can't get the ZAU where I want it, so I'm not even using it sadly. I'll fool with it at some point, as I do love the look. I told you it's a little beast! Also, you only have to do one leg of NR wire, but I haven't tried it that way yet as I know exactly how much kanthal (measured) to get my ideal setup when making coils.

 

[LadyStrick9]

Ok.. I just read about 90% of this entire thread.. head is still spinning.

#1 thanks faceless for making such a great mod. Since you cant wait to kill zombies and can make mods, we should team up the day that happens you can make a Zombie splash anodized iHybrid (HINT YOU SHOULD DO THIS lol) and i'll plink the zombies while you do.. dont worry ill save some for you.

#2 Murdoch - So sorry to see all that go on.. What you do is greatly appreciated. Take a well needed break, watch some movies Thank you.

#3 BIIIIG thanks to Schneck for parting with an iHybrid and bringing me to the family. Your kindness wont be forgotten brother.

I really like this thread, and ill be checking in here all the time now.. just wanted to say Hi and introduce myself now that im up to speed.
Cant wait to see what awesome iHybrids come out in the future!

Welcome to the Forum digunderground

May I suggest some?
It would be great if it converted to PDF file and located in the first page of the thread , which would be helpful for new users of iHybird as well as a reference for the current users
It's just a thought came to me while I'm drinking a cup of coffee and vape Apple.

Cheers,

Hi iAnalyst! I think it's a great idea. I'm not very good with programs...if converted to PDF, would I still be able to edit/maintenance the document? I think what you're referring to is a "Sticky" for the first page, if I'm not mistaken? A Sticky could be added which simply has a link to the Spreadsheet...and it can still be updated. Just explain it to me a little better, if you don't mind.

p.s. And, the "Sticky" would be at Faceless's discretion and approval I think? Thanks so much for your suggestions BTW!!!!!

Hi all new to thread...I have been looking for a hybrid. I have researched and the nerd in me came out when I came across the ihybrid I started saving up and now I am ready to buy. I have used a proveri for a while now, and was told by lots of people to buy a zap, but it dawned on me, why buy a zap if I can just get the real thing? So I just wanted to say hi!

Hi amienichole! Welcome to the Forum

Good morning all. This thread does fly! I need to post just to make sure I know where I left off. Dig and Amien Welcome to the best thread on ECF. Great people here. Just keep reading and you will never stop learning. These people know all the tricks. I still have yet to wrap my own coil. But I am hooked on my iHy. I have 2 more coming and probably another one soon! The flavor is better than dripping. Just buy one. You will not regret it at all. Time to go back to bed. You all have a good day!!

Oh and Happy Halloween!! stay safe out there!

Hi Chelsea! I just wanted to tell you, in case you hadn't noticed, that there is a feature on the first page which allows you find where you left off! It's on that gray bar directly under the Thread Title, it's in blue and says "View First Unread". I use that everytime I come on the site and it takes me to the last post I was reading Hope that helps!

Lets do my avatar instead and call it the kreepy ole baastard. Or one in tye dye and call it the i'm high. Believe me he's got plenty of ideas brewin'. Randy how's the weather? ya'll get any snow, or just the drippin drizzles.

LOL Nurzrachit! A while back I suggested something similar....only I think I wanted it to be called the "iHippie". LOL But I like your idea too!

hi guys, not feeling that great today so not being very active

Sorry you feel bad Nancy, hope you get better soon

 

[Vapor2112]

I know someone looking for a ZAU if you don't fall in love with it...
<------------------

LOL thanks buddy, they all have a good home here, and get used daily. The paps is sitting beside me with your old DID on it, I just can't get the ZAU where I want it, so I'm not even using it sadly. I'll fool with it at some point, as I do love the look. I told you it's a little beast! Also, you only have to do one leg of NR wire, but I haven't tried it that way yet as I know exactly how much kanthal (measured) to get my ideal setup when making coils.

 

[iamtumus]

LOL thanks buddy, they all have a good home here, and get used daily. The paps is sitting beside me with your old DID on it, I just can't get the ZAU where I want it, so I'm not even using it sadly. I'll fool with it at some point, as I do love the look. I told you it's a little beast! Also, you only have to do one leg of NR wire, but I haven't tried it that way yet as I know exactly how much kanthal (measured) to get my ideal setup when making coils.

care to post some pics with the paps/did setup?
i just ordered a DiD for my paps..

 

[WNCmotard]

I know someone looking for a ZAU if you don't fall in love with it...
<------------------

You know you're already first in line if it leaves here

 

[WNCmotard]

care to post some pics with the paps/did setup?
i just ordered a DiD for my paps..

Here ya go, it will get Faceless's attie once it's available

 

[Vapor2112]

Short DID on a Paps with 18350 tube next to a stock Orion v2.1 if it helps.

care to post some pics with the paps/did setup?
i just ordered a DiD for my paps..

 

[MaxPerilous]

Green Envy V1 FT on classies. Wish I had somehting to trade lol. I doubt that dude would be interested in my Provari. For being the high end VV seems like they arent very desireable.

 

[iamtumus]

thanks!

i'm excited

 

[iamtumus]

now i just need to find an 18350 and 18500 battery tube for the paps

 

[Schneck]

Elite vaporworks has kanthal that ships pretty fast

Ya I was just wondering for whoever posted the need wire just popped last coil if ...if there was a store in town to get wire I'm sure I could find away to get them some.....

 

[WNCmotard]

now i just need to find an 18350 and 18500 battery tube for the paps

I have all three tube sizes, love the 350 for on the go, but the 18500 just fits the hand so nicely that it stays in that mode at home. Hits a bit harder too IMO.

 

[Vapor2112]

You know Faceless is working on a full genesis atty to completely replace the top cap of the Paps, Gus, or Caravela, right?
That's going to be HOT.....
Hoping he goes with a threaded top cap on that one and a screw plug for the fill hole..

thanks!

i'm excited