The iHybrid APV - A fully Customizable Genesis

[thevinstigator]

American pickers and pawn stars together. Gonna be a great show.
Re-wrapped my wick and the burnt flavor went away. Woo hoo vape away

 

[LadyStrick9]

Thanks Charger72!
It's a orion V2.1 from a German guy called nosmoker.

Decided to vape my Katana until the Spider arrives, so I can take my first hit off it, and be like, "Damn!" all over again...

Hey guys! Don't forget there's a lot of info about those 2 PV's in one of the Reference Links in my signature

Rat post.....damn this new "My Posts'!!!

I read every post and I somehow must have missed whatever is going on with a new feature "My Posts". Where is that guys? I must not be with it!

Wish everything is going well with you guys
Please I need your pray and your wishes
XOXO

Good luck iAnalyst! I'm sure you'll do fine, lots of love, light & prayers headed your way

Hey everyone! Been following this thread for a while. New to the forum and this thread. Just ordered my first iHy on Friday and got shipping notification today. I am so excited I can't stand it! This will be my first hybrid and my first genny. Every body in this thread is truly awesome and helpful. I've learned so much just from reading this thread. Faceless I just wanna say thank you for building such an awesome pv and being such a stand up dude!! I sence my provari will be getting lonely now. I got a real good feeling about this ihybrid

Welcome to the thread SIX! I also love how helpful and warm the folks are in this forum! Since you're new, I wanted to make sure you check out the Reference Links for the iHybrid (in my signature). It's a collection of helpful "Tips & Tricks" by Faceless and many members...good info!

I wanted to start off small. I also have 1 very specific flavor in mind I'm trying to achieve. But I also got a juicy peach for the wife and they threw in a free bluberry which I really like anyways lol. Not sure if I can pull it off, so starting small and going from there.

Thanks for the tips guys!

I'm thinking I'll prob be shooting for 20% flavor overall. But there are a few flavors going into one juice so it's gonna be a lot of trial and error me thinks.

I realize these are "shameless plugs" for the Links sites, but...I'm just trying to be helpful Having said that, Max...I wasn't sure if you had the link to our iHybrid Friends DIY Spreadsheet. It's also a collection of helpful stuff from our members! TONS of good DIY info. Ignore the mess...it's still "Under Construction".

From reading not experience keep a very nice log so adjustments will be easier.

When I find a flavoring "mix" I like, I also tend to mix up a 30ML batch of JUST flavoring.
Then use some small bottles to mix up different strengths, just a matter of adding your pre-mixed flavoring to the unflavored base, then letting them steep about a week.

DIY tip of the day #2 - Write EVERYTHING down and label your mixes. I had a mix I got impatient on once, didn't let it steep enough, tried some variants, etc.. Tried the same one I hated about 1.5 weeks later, loved it, and had absolutely no clue what the mix was...
So, yeah, whether its on paper, in Excel, in a DIY calculator, doesn't matter, just write it all down and keep notes.

Trust me, nothing is worse than getting something just right and not being able to quickly recreate it...

See? Perfect example! I just added that helpful Tip to the Spreadsheet! Hehehe

you know I only pick on the people I like right?

Oh no, you don't pick on me Bummer, cause I like you!!!!! LOL Just raggin' on ya KT

Hi everyone! It took forEVER to get through the last few pages. Hope everyone had a good day...time change makes it feel so much later, ugh!

 

[Faceless]

Yahs can't wait for the 14500!

Full switches still later this week?

yes

Oh Faceless,

What was the total length of that with switch and top cap? 110mm or something?

errrr, I cant remember, I believe that sounds right

I can tell you this, just an opinion as I havent filled with juice because I have no tank lol but, the chamber for the vapor is small due to the volume of the inside of the top cap. Thats why the orion has such great flavor, so with this being super small and having the correct air flow and venting hole, its gonna be like mike tyson slapping you with a laffy taffy stick

 

[iamtumus]

faceless...anyway i could trade in my ihy standard for a 14500


i feel like i neglect my ihy because it's too big

might just sell it in the classies to buy a 14500

 

[Ezkill]

I can tell you this, just an opinion as I havent filled with juice because I have no tank lol but, the chamber for the vapor is small due to the volume of the inside of the top cap. Thats why the orion has such great flavor, so with this being super small and having the correct air flow and venting hole, its gonna be like mike tyson slapping you with a laffy taffy stick

That's my initial impression as well. Obviously I won't drill my beta unit because its being passed around but a second wick hole...I'd pay good money for that as an "option" or perhaps a standard feature?

 

[Landlord]

yes



errrr, I cant remember, I believe that sounds right

I can tell you this, just an opinion as I havent filled with juice because I have no tank lol but, the chamber for the vapor is small due to the volume of the inside of the top cap. Thats why the orion has such great flavor, so with this being super small and having the correct air flow and venting hole, its gonna be like mike tyson slapping you with a laffy taffy stick

Man laffy taffy is good.. havnt had any in a while

Hey Face, I'm gonna have to add a few things to my package from ya dude

 

[NancyR]

if that was picking on me, youre getting weak



I was giving the glass company a bit to see, but if not here by tomorrow I will start on aluminum tanks so I can speed things up

Faceless I was thinking about this, and more than one of us has cracked a tank through normal use, so it might be better to do the aluminum or needle tanks for the test units anyways, as then no worries about cracking one and delaying the testing

 

[iamtumus]

but my juice and kanthal got delivered to my work today.

ihy will be up and running again tomorrow.

btw faceless, cuz the switch still works i'm just going to buy a new switch when they become available.
the ihy being my only genny atm is rough. can't wait to get that DiD i ordered

 

[Chief Thunder]

yes



errrr, I cant remember, I believe that sounds right

I can tell you this, just an opinion as I havent filled with juice because I have no tank lol but, the chamber for the vapor is small due to the volume of the inside of the top cap. Thats why the orion has such great flavor, so with this being super small and having the correct air flow and venting hole, its gonna be like mike tyson slapping you with a laffy taffy stick

Hmmmm dunno if I want mike Tyson smacking me in the mouth with his laffy taffy stick

 

[thevinstigator]

Hey guys! Don't forget there's a lot of info about those 2 PV's in one of the Reference Links in my signature



I read every post and I somehow must have missed whatever is going on with a new feature "My Posts". Where is that guys? I must


Good luck iAnalyst! I'm sure you'll do fine, lots of love, light & prayers headed your way



Welcome to the thread SIX! I also love how helpful and warm the folks are in this forum! Since you're new, I wanted to make sure you check out the Reference Links for the iHybrid (in my signature). It's a collection of helpful "Tips & Tricks" by Faceless and many members...good info!



I realize these are "shameless plugs" for the Links site, but it's not like I get a commission...I'm just trying to be helpful Having said that, Max...I wasn't sure if you had the link to our iHybrid Friends DIY Spreadsheet. It's also a collection of helpful stuff from our members! TONS of good DIY info. Ignore the mess...it's still "Under Construction".





See? Perfect example! I just added that helpful Tip to the Spreadsheet! Hehehe



Oh no, you don't pick on me Bummer, cause I like you!!!!! LOL Just raggin' on ya KT

Hi everyone! It took forEVER to get through the last few pages. Hope everyone had a good day...time change makes it feel so much later, ugh!

I was not aware of this spread sheet. I guess I will be spending my day off reading over the info there.

 

[KTK8]

Faceless I was thinking about this, and more than one of us has cracked a tank through normal use, so it might be better to do the aluminum or needle tanks for the test units anyways, as then no worries about cracking one and delaying the testing

I for one think this is a great idea....it's better to be safe. I'd hate to be the one to hold up the beta because I broke the tank pretty sure people might hunt me down and kill me

 

[elfstone]

Faceless I was thinking about this, and more than one of us has cracked a tank through normal use, so it might be better to do the aluminum or needle tanks for the test units anyways, as then no worries about cracking one and delaying the testing

I have no dog in this race, unfortunately, but I tend to agree. People will probably want to go the extra mile cleaning the stuff before they pass it on and accidents happen.

 

[LongHaul]

New units are looking good Face, and I'm going to be around Wensday

 

[MissEmma]

Faceless I was thinking about this, and more than one of us has cracked a tank through normal use, so it might be better to do the aluminum or needle tanks for the test units anyways, as then no worries about cracking one and delaying the testing

That's a good idea, Nancy. You never know might be clumsy....(me?)

 

[LadyStrick9]

That's a good idea, Nancy. You never know might be clumsy....(me?)

I already know I am MissEmma! LOL

 

[ATX]

My mail man is officially a person of interest... Got my iHy tracking today! also got tracking for all of my kanthal and mesh, lets hope they don't get here too long after my iHy lol

 

[Chelseafn]

so I'm sitting here talking to employees on the phone and staring at my vape gear, yall are going to love what I just came up with!!! I'm going to start on it ASAP!!!! No details until its done........ Let me just say, I'm excited!!

Well there goes my bank account again. Trying to catch up. Only 22 pages to go!

 

[MrMayhem]

Awesome job on the Spider, Faceless, Fisty, and Phr0st! I'm digging it. I like the new Ihy Drip Tip too! Good stuff!

 

[grruss]

Anyone ever wonder why my avi is an otter?

 

[paulbald2]

Anyone ever wonder why my avi is an otter?

Because your a clean freak?jk