The iHybrid APV - A fully Customizable Genesis

[jcarabelos]

Take it apart, take the o-rings off.. wash everything with dish soap/washing up liquid. Rinse well. You can take it a step further and dip the parts in cheap vodka as the last step if you want, helps if you have very smelly dish soap. Make sure to take your drip tip off your top cap and wash those two pieces as well. I like the taste of Pluid and don't find it bad mixed with other juices so I just sploodge my other juice right in, but it's very helpful to remove any lingering oily flavors like the anise and cinnamon. I do it if I switch from a strong tobacco to a fruit flavor as I don't like that combination much, I prefer tobacco flavors with caramels and creams and my fruity vapes unadulterated or spicy.

Usually you don't have to do that full cleaning though.. I just run it dry and add the new or at most put cheap vodka in the tank (with the wick/coil still installed) swish it around a bit and syringe it out. Burn it til the wick is dry and it's good to go. Oh, ans wash the top cap and drip tip.. you'd be amazed at how much of the flavor is actually lingering there.

Thanks Fisty! I'm gonna go fill that tank now! Bbl!

 

[xformulax]

went to clean my switch and missplaced a spring... time to try magnets I suppose

 

[xformulax]

LOL, nobody is going to believe me, but I fixed the missing spring by using a nerf dart..... I actually like the throw better, but i'm sure the foam will wear out

 

[silentdoom]

LOL, nobody is going to believe me, but I fixed the missing spring by using a nerf dart..... I actually like the throw better, but i'm sure the foam will wear out

MacGruber!

That's a funny fix!!! At least when it does wear out, you have more of that dart to use

 

[xformulax]

MacGruber!

That's a funny fix!!! At least when it does wear out, you have more of that dart to use

maybe not... i'm experimenting with using nerf foam for BOTH springs. (luckily my son has like 50 darts )

 

[Shaitaan]

Sorry Brian.....I don't consider an atty a device (just a matter of opinion).....I was speaking more of the hybrids from both Zen and Faceless.

...no worries brother

 

[car1os]

Morning All, Amie the Mod stand looks Stunning and all the best for today we all have our fingers and toes crossed for you

Carl

 

[Fisty]

I'm really sorry to hear of the loss of your beloved family member, Cyclin.. in response the Celtic LE is going to have dogs on it. Very stylized dogs, but dogs none the less.

 

[Skud]

still waiting for face to do an LE with strong tech appeal. when it happens, i'll be all over it. i might even install a second f5 key.

 

[Fisty]

One of these days I'll do a circuit board design.

 

[LadyStrick9]

anyone got places to get different color o-rings? ive seen some people with yellow on illuminati.

Hi scoopbb There tons of o-ring vendors on the iHybrid Spreadsheet (starting at Line #219) FYI!

Stalker chris and scubatadan have good videos on u wicks. Took me a few (dozen) tries but once you get it right it's easy peasy. I take the mesh, cut on the bias androll it - use a piece a bit longer than you need. Massage it (pull it while rolling) w/ fingers to a curve then cross bottom ends of the wick - torch the top of the u to tighten it up. The heat makes the u smaller** without putting any unnecessary kinks in the mesh.

**Edited to add: this works on a very thin wick for my HF, don't know what the size of the wick hole is for Synthesis or if this would work as well here.

Do you have a link to these videos by any chance? Thanks

Yup. Love my daughter but had to switch it up for one of my best friends over the last decade. He died last night

So sorry Cyclin Lots of of love, light and prayers from all your friends on the forum!

Definitely! I can at least tell you where to get a good lunch!

EDIT: Fall is my favorite season in Michigan. Breathtaking...

Me too Grruss! I lived in Michigan 21 years...and I truly miss the fall, cider mills and burning leaves, etc.. Up-state NY is also beautiful in the fall.

I tried a kick when I was new to the iHy, at the time I didn't have a meter so I didn't know the reason I couldn't find a sweet spot on it was I was vaping between 12-15 watts and it limited me to 10 watts. I sent my kick to Blaine who is currently away for a bit, and he loves it.

I miss Blaine. If anyone hears from him...PM me? Let me know how he is? Thanks.

Goodnight folks See you tomorrow!

♥

 

[Fisty]

Up-state NY is also beautiful in the fall.

Yes indeed.

I miss Blaine. If anyone hears from him...PM me? Let me know how he is? Thanks.

http://www.facebook.com/blaine.gardner.98
Go poke him..

 

[Skud]

One of these days I'll do a circuit board design.

please, please, please do! seriously, that would make me the happiest vaper in the world!!! the other LE designs are great and all, i think they all look amazing, but i just don't relate to them on a personal level. seriously, i will do whatever it takes to make this happen. i'm not good with visual art, but i know circuit boards intimately (i'm a recording engineer who builds custom gear on a regular basis). please do this.

 

[Skud]

i already thought of a wicked tank cut-out:

 

[Fisty]

Find me a good picture of traces that will convert gracefully into black and white and isn't copywrited. I would prefer to do the whole tube for that rather than the whole tube on the 350 and cut off half way on the 650.

Hey Cyclin.. can you engrave over the already cut out tank sleeve? It would look wicked if the whole thing was covered in traces. We have no way of making the traces line up from the tube to the sleeve, Clyclin doesn't have a jig like Face does, but it would still be epic if it can be done.

 

[Skud]

found a really cool image on shutterstock, don't know what it would take to be able to use it, i assume very cheap. it's a trace tree. i'm looking for more.

Circuit Board Tree Background Stock Vector 80530384 : Shutterstock

 

[Huffelpuff]

Here are some videos for u-shaped wick. Still looking for the one that uses headset wire, as this would also be good for a larger wick hole.

How to make a U wick - YouTube

Wick for Scubagen - YouTube

How to make a curved SS Mesh Wick - YouTube

 

[Skud]

here's a potential candidate, the circuit design is public domain. you could maybe change the MPH to IHY. it would be awesome to have the number act as a serial number for each individual device, but that might be highly impractical and cost prohibitive, but perhaps somebody can think of a fitting number or set of characters.

 

[Skud]

Circuit Board, Vector File, Change The Colors As You Like - 2606255 : Shutterstock

stop me if this shutterstock stuff is completely useless to you.

 

[Tat_skull]

Good Day Hybreeds That was an epic catchup, two days away, NEVER AGAIN

Cyclin, sorry to hear about your Buddy, it's tough to lose a pet I know, I get attached to my mine, I consider my cat my son

Finally got my lost Gus in the mail today(well yesterday, but still today), set the Cobra on it and its Great!! So sitting here with 2 IHy's and the Gus all coiled up perfectly(all set up different) lovin' life but fallin' asleep Time to hit the hay(finally), Good mornin' Good night all