The Joyetech Ego-CC

[srcowell]

Most regular size clearomizers are a bit longer than the 650 eGo-c. The joye clearo is about 2mm longer than the Kanger T3. You must have a different eGo-t because the Joye eGo-t 650mAh are a bit shorter than the regular 650 eGo-c - mainly because they don't have the newer short and charge protection.

The best 'stealth' setup without going lower than 650mah is the regular eGo-c with the baby T3 from sun vapors.

Kent, I don't know about having a "different eGo-T" because I ordered everything from Cignot just last week. It arrived on the 29th, from from Vicki's inventory. I didn't expect the 650-t to be the length of a regular 900. Like I said, I didn't pay enough attention to the sizes that were right there in the online catalog. My bad. I gave them all to my wife, who doesn't seem to mind vaping a baton. I prefer the stealth size and weight of my old standby 650 and cartomizers. I don't mind the leaks. I just lick my fingers and buzz away.

 

[Kent C]

Kent, I don't know about having a "different eGo-T" because I ordered everything from Cignot just last week. It arrived on the 29th, from from Vicki's inventory. I didn't expect the 650-t to be the length of a regular 900. Like I said, I didn't pay enough attention to the sizes that were right there in the online catalog. My bad. I gave them all to my wife, who doesn't seem to mind vaping a baton. I prefer the stealth size and weight of my old standby 650 and cartomizers. I don't mind the leaks. I just lick my fingers and buzz away.

The blurb on the eGo-t is "This is the 650mAh eGo-T battery. The length of the 650mAh is 2 3/4 inches." ... which is standard size. I'm guessing you're talking about the 650mAh eGo-c Twist which is about the size of a regular 900 batt. Doesn't matter Everyone's happy.

 

[2clicker]

ive been wanting to get a 900-1000mah eGo usb mini passthrough and then stumbled upon this. love the idea of a small tank with zero leakage and great flavor. some questions tho...

is the drip tip a removable tip? it appears so, but im just checking to be certain before ordering a kit.

also, where is the best place to order the kit? is there a coupon code or ECF member code?

oh and can the tank be cleaned? can you buy one cc and just have to replace the heads or will the tank itself half to be replaced?

my other thought is to run vision nanos on an ego with a cone of some sort. capacity is great for me, its a small profile, small chance of leakage, and flavor is good.

 

[Kent C]

ive been wanting to get a 900-1000mah eGo usb mini passthrough and then stumbled upon this. love the idea of a small tank with zero leakage and great flavor. some questions tho...

is the drip tip a removable tip? it appears so, but im just checking to be certain before ordering a kit.

Yes, it's removeable but if you buy just the cc there is no extra tip. If you buy a kit, then there's a delrin tip as well. The regular tip is metal but doesn't taste metalic to me. And the tip has the flare out to the diameter of the tank. So other tips might look a bit awkward but any 510 tip will work.

also, where is the best place to order the kit? is there a coupon code or ECF member code?

Pretty sure cignot.com is the only place in the US selling it right now. That will change No coupon code that I know of.
https://www.cignot.com/category_s/85.htm



oh and can the tank be cleaned? can you buy one cc and just have to replace the heads or will the tank itself half to be replaced?

Tank could be cleaned but shouldn't be necessary. Run some pure PG or VG blend through to remove flavors. Also could do PGA - a syringe would help with that.

Just replace head, not tank..

my other thought is to run vision nanos on an ego with a cone of some sort. capacity is great for me, its a small profile, small chance of leakage, and flavor is good.

https://www.cignot.com/product_p/ego-acv-all.htm

These are nice for eGos as well.... small tank, leakless:

https://www.cignot.com/product_p/msc-kt3-cmc.htm

 

[greenskeeper805]

ive been wanting to get a 900-1000mah eGo usb mini passthrough and then stumbled upon this. love the idea of a small tank with zero leakage and great flavor. some questions tho...

is the drip tip a removable tip? it appears so, but im just checking to be certain before ordering a kit.

also, where is the best place to order the kit? is there a coupon code or ECF member code?

oh and can the tank be cleaned? can you buy one cc and just have to replace the heads or will the tank itself half to be replaced?

my other thought is to run vision nanos on an ego with a cone of some sort. capacity is great for me, its a small profile, small chance of leakage, and flavor is good.

Yes the tip is removable and fits other clearomizers, I use a plastic top from an ismoka BCC on my CC.

I agree that CigNot is a very reputable place to get your gear including all Joye. I shop no where else.

The tank can be cleaned. I run mine under hot water and blow out and air dry. The "heads" are changeable, hence the term CC, changeable clearomizer. The heads are also IMO the hardest vaping, longest lasting, easiest to clean that I've used. Ive had some that are 3-4 months old, taste great and show no signs of failure. The wicks are also VERY easy to replace. Vickie has a great video on her website, CigNot.com for the eGo C that covers this procedure, it has the same "head".

I would go with a genuine Joye eGo C or Twist batt. Looks great with the CC, no need for a cone, the CC uses 510 threads. You can probably use a knockoff battery but you'll be better in the long run with genuine Joye stuff. My batts are 8 months old and still going string. The fakes are much shorter lived and you only save a couple bucks plus you never know if they have the overcharge protection or the other protection joye batts have.

 

[misterholidayhouse]

Thanks a bunch for the Cignot link. Just ordered the CC and a 15 pack of atties. Best deal I've seen on them and should last me a year with some rewickings. I use eRolls hard every day but I've been waiting to find a clearo for my Ego twist that I mainly use for dripping with a HH357. I've also got eVods on order so it will be fun to compare them to the CC. I'm going to reserve the eVods for my 100% VG juices like Bobas. It doesn't agree with the type A atties in the little eRolls..

 

[2clicker]

so can the kanger T3 minis accept the ProTank/evod heads? if so i am in as ive already got a PT2, Davide mini (same heads), and a couple of evods. the davide mini and evods are still more volume than i need.

so far im liking the Kanger T3 Mini (love that the heads can be replaced/rebuilt), the Vision Nanos (heads cannot be replaced/rebuilt), or the Joyetech eGo-cc tanks (at least the heads are replaceable, not sure about rebuilding).

T3mini has the lead so far, but i really dont wanna have to mess with any leaking at all. the V Nanos and eGo-cc seemed to have that under control.

 

[misterholidayhouse]

The Joyetech type A atties are easy to re-wick. The rest of the atomizer, including the coil, is almost indestructible. Dry burn, re-wick the inlet spike, and they are good for months and months. Some love them, some hate them. I've been on both sides, but as I try other things I appreciate the workhorse quality of the coils and the ability to produce more flavor and vapor than most clearos.

 

[Randall.K]

Looks pretty good. Can anyone confirm if it's a glass or plastic tank?

 

[Kent C]

so can the kanger T3 minis accept the ProTank/evod heads? if so i am in as ive already got a PT2, Davide mini (same heads), and a couple of evods. the davide mini and evods are still more volume than i need.

so far im liking the Kanger T3 Mini (love that the heads can be replaced/rebuilt), the Vision Nanos (heads cannot be replaced/rebuilt), or the Joyetech eGo-cc tanks (at least the heads are replaceable, not sure about rebuilding).

T3mini has the lead so far, but i really dont wanna have to mess with any leaking at all. the V Nanos and eGo-cc seemed to have that under control.

The T3 mini (or the T3S/MT3S) can't accept the protank/evod coils. But the protank/evod will accept the T3S coils. The T3 mini can be converted into a 'T3S mini' by using the T3S base and coil.

 

[2clicker]

The Joyetech type A atties are easy to re-wick. The rest of the atomizer, including the coil, is almost indestructible. Dry burn, re-wick the inlet spike, and they are good for months and months. Some love them, some hate them. I've been on both sides, but as I try other things I appreciate the workhorse quality of the coils and the ability to produce more flavor and vapor than most clearos.

well the ego-cc sure looks like a solid setup, but they are a tad long for my liking. i was wanting to run a 900-1000 mah ego, but with the cc i would feel the need to get a 650mah instead.

Looks pretty good. Can anyone confirm if it's a glass or plastic tank?

im thinking its plastic/poly otherwise they MFG would likely be advertizing it with the word Glass. because of that id say its not glass.

The T3 mini (or the T3S/MT3S) can't accept the protank/evod coils. But the protank/evod will accept the T3S coils. The T3 mini can be converted into a 'T3S mini' by using the T3S base and coil.

thanks! i believe i am leaning towards the T3 minis. im loving their size. i do prefer the 510 threads on the nanos though and they are tiny... just not rebuildable.

oh and what is the advantage of the T3S base over the stock T3? i still cant use PT/evod heads in it right?

can the T3S mini be purchased anywhere as the whole clearomizer? or do i have to get the T3 and then order the T3S base separate?

 

[Randall.K]

im thinking its plastic/poly otherwise they MFG would likely be advertizing it with the word Glass. because of that id say its not glass.

Cheers. I doubt I'll end up buying one, might leave it a few more weeks till there's some more reviews on it.

 

[sze5003]

I'm interested in this cc type but I'm not sure if it will be different than my volt spinner which I currently use.

Sent from my HTC6435LVW using Tapatalk 2

 

[Sd13]

After dealing with alot of frustration with protons, evods etc. I am considering the ego-cc clearo since i have a 10 pack of attys lying aroundfrom my old ego-c cartridge days. How easy is it to change flavors on these?

 

[greenskeeper805]

After dealing with alot of frustration with protons, evods etc. I am considering the ego-cc clearo since i have a 10 pack of attys lying aroundfrom my old ego-c cartridge days. How easy is it to change flavors on these?

I wouldn't say that it is easy. Its about as hard as any clearo. Unless you rinse the tank out with hot water, you'll be mixing a tiny bit of old juice into the new. You can of course change the atty, but if the tank still has some juice left you'll need to clean it out. It still vapes better than my buddies protank.

 

[Sd13]

I wouldn't say that it is easy. Its about as hard as any clearo. Unless you rinse the tank out with hot water, you'll be mixing a tiny bit of old juice into the new. You can of course change the atty, but if the tank still has some juice left you'll need to clean it out. It still vapes better than my buddies protank.

Thanks for the fyi! Do you think the atty absorbs new flavor and gets rid of the old one easier than a lets say protank atty?

 

[greenskeeper805]

I've switched juices a couple times without cleaning anything and after a couple puffs the flavor is changed without any weirdness. Course it was from coffee to root beer float, similar flavors. I wouldn't do anything drastically different.

 

[misterholidayhouse]

I have been using the type A atomizer for a long time and flavor changes are complete with three or four puffs with no residual. No worries there. Cleaning the tank thoroughly will be the key. My CC should be in the mailbox tonight when I get home.

 

[sze5003]

I have been using the type A atomizer for a long time and flavor changes are complete with three or four puffs with no residual. No worries there. Cleaning the tank thoroughly will be the key. My CC should be in the mailbox tonight when I get home.

I'm waiting for mine too. Post your impressions when you try it out. I read one person was having issues filling it from the bottom since the hole is so small but you can actually take off the covering to fill.

Are you mainly going to use the clearo it came with or does any 510 clearo work on it? Only wondering because one cc clearo is 15 bucks and I'm wondering if I order different types I may also need different atomizers. I hear the ego CC comes with type A attys.

Sent from my HTC6435LVW using Tapatalk 2

 

[Kent C]

I'm waiting for mine too. Post your impressions when you try it out. I read one person was having issues filling it from the bottom since the hole is so small but you can actually take off the covering to fill.

Are you mainly going to use the clearo it came with or does any 510 clearo work on it? Only wondering because one cc clearo is 15 bucks and I'm wondering if I order different types I may also need different atomizers. I hear the ego CC comes with type A attys.

Sent from my HTC6435LVW using Tapatalk 2

Sounds like "mister...." only got the cc clearo, so when you say 'does any 510 clearo work on it', I'm guessing you mean does any work on the battery that comes with the CC kit. The answer to that is 'yes'. It's a regular eGo-c battery and any clearo or atty/carto with 510 threading will fit. Those with 'eGo skirts' or that use the eGo cone threading are better looking but you can get sleeves to cover up plain 510 threads on attys/cartos.

Both the eGo-c A and B type 'heads' (coil units) will work with the CC but it comes with the A type. There is a slight difference in design but not in 'fit'/sizing of the A and B heads. I'd stick with A types if you haven't any of the B's around but I'll be using B's as well because I have a few in stock. So far, I haven't had to change the head but I'll put a B on next just to see if there are any issues.

As far as price goes, you're probably better off with the Kanger T3S - more capacity and 1/3 of the price.