For your viewing pleasure....
Strictly Info thread
More info, chitchat, tons of gorgeous pictures thread
The Nicoticket Approved Delivery Device Advice Thread
- Thread starter taki1203
- Start date
- th_trl_thread_readers 0
- Status
For your viewing pleasure....
Strictly Info thread
More info, chitchat, tons of gorgeous pictures thread
Signed up!
(Edit: Listed as #239)
Had to do it and if for no other reason then being beautiful, they are built in the city of which I was born.
(Edit: Listed as #239)
Had to do it and if for no other reason then being beautiful, they are built in the city of which I was born.
Last edited:
Argh. Stupid USPS. Saying my address is undeliverable for my reo (which is total bull as I got one 2 Friday ago). Now they're saying they'll be returning if they can to shipper. I've let rob know, but this some serious frustration causing stuff
Sent from my Galaxy Note 3 via Tapatalk.
Sent from my Galaxy Note 3 via Tapatalk.
Man, you seem to be snake bit my brother! Get a hold of your local PO and have them put a hold on it.
Reo #2 says "out for delivery" on my end.
Reo #2 says "out for delivery" on my end.
So called the local po. They said this is not in the return to sender area. Also the time it was scanned undeliverable was at 305 am, no one is there. The supervisor will call me after they reach the driver to see if they recall it.
Edit: carrier confirmed on board for delivery, non issue.
Sent from my Galaxy Note 3 via Tapatalk.
Edit: carrier confirmed on board for delivery, non issue.
Sent from my Galaxy Note 3 via Tapatalk.
Last edited:
No fair! Your afc cap sits flush. I'm going to have to go on the classies to see if I can get a bf cyclone with afc top. Mine is functional (quite well, in fact) but doesn't look as pretty.
Sent from my Galaxy Note 3 via Tapatalk.
HOLY DRIP TIP BATMAN!!! ( or should I say smoke stack! 
)
Love the Woody's and am waiting for the next batch. Just put in for a Dibi too. Not taking any wagers on which will land first.
)Love the Woody's and am waiting for the next batch. Just put in for a Dibi too. Not taking any wagers on which will land first.
Last edited:
I bought a top feed and modded for my Reo and the AFC sits flush. What is holding it up ? Mine has a slight indentation between the outer AFC ring and the inner ring. This allows the small lip in the base to sit inside the cap. Might check to see if that is lined up correctly. Are the holes in the inner cap directly in the center of the slot on the outer ring?
Last edited:
I bought a top feed and modded for my Reo and the AFC sits flush. What is holding it up ? Mine has a slight indentation between the outer AFC ring and the inner ring. This allows the small lip in the base to sit inside the cap. Might check to see if that is lined up correctly. Are the holes in the inner cap directly in the center of the slot on the outer ring?
I have the top feed with afc cap and base, but also have bottom feed base. I think its the lip on the afc cap that's holding it up. I tried removing the to o ring and still had the same issue with bottom feed base + afc cap for top feed.
If I had the right tools or know how, is just mod the top feed base.
Sent from my Galaxy Note 3 via Tapatalk.
Just for chits and giggles I just tried my AFC cap on my non-AFC bottom and guess what? Both fit! There is a grooved ring inside of the AFC cap right about at the height of the base. Feel around inside of your AFC. Is there any part of the grooved ring protruding from the machining process?
The top feed base is thinner than the bottom feed base from the looks of it, the afc top you have is meant for a bf, so all bf should fit.
Sent from my Galaxy Note 3 via Tapatalk.
I bought a top feed and modded for my Reo and the AFC sits flush. What is holding it up ? Mine has a slight indentation between the outer AFC ring and the inner ring. This allows the small lip in the base to sit inside the cap. Might check to see if that is lined up correctly. Are the holes in the inner cap directly in the center of the slot on the outer ring?
Loving that clear CF on the door. May have to copy that. Also thinking of breaking out the pin striping kit and adding a design to mine.
Thanks. I have it in white, silver and black. I tend to rotate around them depending on my mood. Had been sporting the white cf for awhile, but am really liking the silver. Pinstriping is very cool. If you google automotive restyling vinyls there are a lot of options for doors and cool customizations. There are cool products from a bunch of different manufacturers although small amounts can sometimes be an issue.
- Status
Similar threads
