The Nicoticket Approved Delivery Device Advice Thread

[brookj1986]

I run duels sub 0.40 so assuming you have the new contacts/button you should be fine.



On a stock RM2 I can get twisted 28g in no problem. Timbuck I think is running parallel 28g without a problem either. Give it a shot

I had twisted 29 gauge parallel coil and it was not happy to fit thru the holes. A regular 28 gauge parallel coil fit fine. If I tried dual 28 gauge parallel coils it'd probably struggle to fit.

Sent from my Galaxy Note 3 via Tapatalk.

 

[Claudia P]

You don't need a drill to enlarge the hole in a RM2, I've done both of mine with a bead reamer, the brass is so soft it is very easy to do by hand. I got a set of diamond bead reamers from a craft store years ago when I was making jewelry and they work great.

I am looking into a reo mini with reomizer but keep reading about having to drill the hole out in the reomizer...am a total girl these days and have no drill etc. lol ugh is there a good bf rda with AFC that doesnt double the cost of this thing?

 

[PersimmonNJ]

Oh dear. I may be falling down the rabbit hole...

 

[emegaz]

Oh dear. I may be falling down the rabbit hole...

Enjoy the ride while it lasts

 

[PersimmonNJ]

Well, after my first foray into using the classifieds here being a very negative experience, might rethink this...who knows...might save me a lot of $$ in the long run.

 

[distortoblotto]

Some good deals can be had but you have to stalk the classy's. There was a new "Mini LP' this morning for$100 that was snapped up in mere minutes.

 

[PersimmonNJ]

Yes there was 1 tonight that was a bit mishandled as seller allowed 2 of us to pay.

 

[distortoblotto]

Oh, Not cool, Not cool at all. Did they send a confirmation PM statng it was yours?

 

[PersimmonNJ]

Welp, order for mini LP confirmed and en route...now to stock up on coil building supplies...oh and batteries lol

 

[distortoblotto]

That's great to see PNJ. Happy for you! I am sure you are going to fall hard after getting it set up and tasting the flavors and vape quality that emit from it.

Now your only quandary is going to be (when or if ) to purchase #2!........

For myself, I just came home from a very long Haz Mat refresher course to find my new Cyclone afc cap for Reo #2 sitting in the box smiling at me.

My just reward for a very dry and boring day. Happy, Happy, Happy for both of us........

 

[brookj1986]

That's great to see PNJ. Happy for you! I am sure you are going to fall hard after getting it set up and tasting the flavors and vape quality that emit from it.

Now your only quandary is going to be (when or if ) to purchase #2!........

For myself, I just came home from a very long Haz Mat refresher course to find my new Cyclone afc cap for Reo #2 sitting in the box smiling at me.

My just reward for a very dry and boring day. Happy, Happy, Happy for both of us........

Hazmat eh, had to sit thru one of those a few months ago. Gotta love logistics. 3 days. Soooooo much fun.

I have fallen for my RM2 all over again. Drilled that second hole and wow.

Sent from my Galaxy Note 3 via Tapatalk.

 

[PersimmonNJ]

That's great to see PNJ. Happy for you! I am sure you are going to fall hard after getting it set up and tasting the flavors and vape quality that emit from it.

Now your only quandary is going to be (when or if ) to purchase #2!........

For myself, I just came home from a very long Haz Mat refresher course to find my new Cyclone afc cap for Reo #2 sitting in the box smiling at me.

My just reward for a very dry and boring day. Happy, Happy, Happy for both of us........

First I have to see how I manage with first coil build lol

 

[taki1203]

Heads up peeps, Rob just confirmed he's working on several new BF atty offerings in Reoville:
http://www.e-cigarette-forum.com/forum/reos-mods/577376-atomizers-i-am-working.html

 

[taki1203]

First I have to see how I manage with first coil build lol

If you're really lazy you can buy them pre-made now lol
UD Pre build Micro Coil

 

[Dominique Hoogduin]

Hmm quick question.. I got myself a bf cyclone (somehow there was a decent webshop locally that sells them.. took me 4 months to stumble across them) .. But my reo is having a hard time making a connection to it. i can adjust the center pin of the cyclone a bit but im not sure that is the proper way of doing it... any thoughts on this?

 

[PersimmonNJ]

thankfully the specs are wrong for me so I wont be going the lazy route lol

 

[distortoblotto]

Hmm quick question.. I got myself a bf cyclone (somehow there was a decent webshop locally that sells them.. took me 4 months to stumble across them) .. But my reo is having a hard time making a connection to it. i can adjust the center pin of the cyclone a bit but im not sure that is the proper way of doing it... any thoughts on this?

Do you have the LP Reo or the standard?

 

[Dominique Hoogduin]

Do you have the LP Reo or the standard?

Its a lp reo

 

[distortoblotto]

Good. You should be able to adjust your pin out on the Cyclone however, if the center post becomes too loose there is a problem. The fix (if this is the case) is a pain in the backside but a phenolic washer is your best bet to add a little space between the screw and the post. The hard part is finding one that will fit. The good part is, they are very easy to turn down on a sanding block when mounted to a Dremel mandrill.

The only other thing to check (and I dread the thought) is to make sure your Cyclone is authentic. If you are still having problems, post some pictures here and we will see what else we can do to help......Good luck to you!

 

[akuser47]

A vtr with viva nova have to play with its depth of how screwed in for good hits. It is awesome flavor though have virus in her now. Amazing flavor n vaper.

Live free, Ride free, or Die fighting for the right to do so!