The Nicoticket Approved Delivery Device Advice Thread
- Thread starter taki1203
- Start date
- th_trl_thread_readers 0
- Status
Same here 28 ga. 7/6 duals on the next to smallest coil gizmo rod a little larger than 1/16" but not much. Runs about .4 ohms delicious.
what is everyone using for taste? gauge, wraps, etc. on a RM2
Tracey
Hi Tracy! Is the intake on your RM2 stock or is it drilled out a bit?
8-9 wraps on 29 gauge for me on the RM2. I have the stock air intake and it's about right for me but I gave up the ReadyxWick and am back to rayon. Can anyone tell me how the tight draw I keep reading about on the cyclone compares to the stock RM2? Are they close to the same?
The non AFC Cyclone is about the same but if you go with an AFC version, you can adjust it to whatever you may prefer.
Enablers in please...
So a couple of questions about remomizers before I start pulling triggers over here!
I've decided to go LP Grand to start with (unless something LP Mini or a Woodville pops up in the classies) and am wondering about the differences in the reomizers. Anyone care to take a stab at sorting through the differences and benefits of them.
I chase flavor not clouds. My builds stay within .6 to 1.8 (unless I'm using a high watt device or my batteries dictate otherwise). I prefer a loose draw. I tend toward single coils on my mech to extend my vape time, but don't have an issue using duals or funky coil builds. I have become a lung hitter unless it's ACB
I will probably own more than one Reo, so this choice in toppers will not be my last. I'm sure this will be fun for y'all!!!
.....GO!
Edit: Originally I had decided on a Mini, JUST bought more 18650 batteries so an LP Grand it will be. I can wait on the Mini until the 510 upgrade. Don't be confused by any quotes of this original post. Thanks for your patience.
Last edited:
Enablers in please...
So a couple of questions about remomizers before I start pulling triggers over here!
I've decided to go LP Mini to start with (unless something LP Grand or a Woodville pops up in the classies) and am wondering about the differences in the reomizers. Anyone care to take a stab at sorting through the differences and benefits of them.
I chase flavor not clouds. My builds stay within .6 to 1.8 (unless I'm using a high watt device or my batteries dictate otherwise). I prefer a loose draw. I tend toward single coils on my mech to extend my vape time, but don't have an issue using duals or funky coil builds. I have become a lung hitter unless it's ACB
I'm sure this will be fun for y'all!!!
.....GO!
For simplicity and ease of build, the rm2. But, you may have to enlarge the air hole.
If you want afc, the nuppin or cyclone. I have both and prefer the nuppin on my lp grand. Since you are planning on a mini, I would recommend the smaller atty's so it won't look/be top heavy.
So are the rm2 and the Reomizer both the smaller ones or just the rm2? I guess I don't understand the difference between the rm and the rm2...
Edit: began reading this thread furthur. rm2 has the ceramic deck? Need to pm Rob and see if he has any. They show OOS on the website.
Last edited:
RM2 and Reomizer are the same thing. You will need the un-milled rm2 for a lp reo.
And yes, pm Rob to check on the availability. The site is not always current. FYI - he is supposed to be coming out with a ss 510 connection version if four weeks or so.
I'm sure the veteran reonauts will be along shortly to lend you some of their experience.
I'm on the verge of buying another one and don't understand what the new 510 is really all about. I'm in no hurry to buy so if you were me, would it be worth waiting for it?
If you are talking about buying a REO. Yes, it is worth the wait. Less than a month now for the gasket less 510. I am waiting myself.
Yep, talking about buying another Reo. Hardest part was deciding on a color and then the new 510 came up. I still don't get the difference but I'll take your word for it!
Sounds like I'll have my 3d printed bf mod up and running right around the time the ss 510 comes out for the reo.
Send in my reos for the spa upgrade treatment when that time comes.
Send in my reos for the spa upgrade treatment when that time comes.
Just picked this up in the classies (ignore the carto it's got an rm2 as well) for a very nice price!
My second will be a mini fro Rob next month I think. My work light saber is starting to spark, so I had to work fast!
View attachment 388669
My second will be a mini fro Rob next month I think. My work light saber is starting to spark, so I had to work fast!
View attachment 388669
Hello again Tracey...Sorry for not replying right away. Just as I was posting the question, we had to take one of our old folks to the hospital for a wee stay.
The reason I asked about your intake is, being that you have or prefer the stock air intake tells me that you are a mouth to lung hitter No? With that, I think you may find that keeping your coils between 1.0-1.4 ohms will give you the best results. Any thing lees than that can start to be a bit of a warm vape. At least this is what I have found anyway. By comparison for myself, ( being a lung hitter) I have my intakes punched out to "dual" 5/64's. I run my coils between 0.4-0.8 ohms and actually prefer to run them in the 0.6-0.8 range where I find that for me, is optimum for flavor.
This one is for Soignee as a reference to drip tips.
sorry about the crappy photo!
sorry about the crappy photo!
This one is for Soignee as a reference to drip tips.
sorry about the crappy photo!
How many Reos do you have??? WOW!!!
This one is for Soignee as a reference to drip tips.
sorry about the crappy photo!
Thanks Distorto. I appreciate the visual aid! Nice lineup. I'm headed for a Dreddy Door next. You're aces man!
Sent from Stoooopidtalk!
- Status
Similar threads
