The noob knows ..!

[BATHY]

Hi my name is Steve, I have only been vaping for 8 weeks, I researched vaping for about a day on YouTube. I then decided I would buy the best on the market. So I got a provari and a Odysseus. ( hard to get hold of ) but I got one. Then I got a, well lets just say 7 rebuildables the last one being line v2. I have tested all of them extensively. And will be selling all except. Odysseus. I will keep the provari because it tells me my ohms. Then I bought a stealth and put it on the Odysseus. CLASS. So now I have ordered a p&p #180 ( hopefully I will get that number ) I haven't got a clue what it will look like, but going off the reliability of the Odysseus and stealth, I think my blind order will pay off. To cut a long story short...... I bought what I thought was the best rebuildable and it was. by far.
Sorry for the long story but it's true.
( if you buy the best you will save ££££$$$$. Simples.)

 

[MrKrinkle]

Soon GGTS will have VV or VW and this is the only thing a Provari can do that a GGTS cant.... but only GGTS has Draw Control and once you go draw control your Provari will be nothing more than a very expensive way to test ohms & batteries... at least until the P&P comes to market... but a $15.00 digital multimeter can also tell you ohms and voltage as well and then you can sell your Provari and buy more GG stuff...

 

[BATHY]

1 mistake then that's not bad. That's all I use it for testing ohms. When I can do that with GG it's in the bin. Or until my coil making skills improve.

 

[MrKrinkle]

Once you go GG everything else is just a toy...

 

[BATHY]

You don't need to defend GG the quality speaks for itself, but the provari has its uses for me anyway as I only rebuild, don't use cartimizers only build my own. GGTS that's what's next if I can figure out what parts I need to upgrade the stealth... Still learning, but got £ 900 saved from not smoking to spend on GG

 

[MrKrinkle]

No defense my friend only stating the facts... as far as upgrades go you will need these things to upgrade a stealth to a full GGTS.... I selected the SS versions of each but other materials such as the brass versions can be used if you like the look of brass...

1. GGTS Full Connector with Control Tank
2. GGTS Top Tube
3. GGTS Steel - Telescope

Hope that helps and as always enjoy the vape...

 

[BATHY]

Thanks for that.. I want to use a 18650 battery can this be done .

 

[MrKrinkle]

yes with the items I listed for you a 18650 can be used as well as any 18, 16 or 14 series battery available... I recommend only using the AW IMR batteries for anything GG personally... and as a frame of reference the first 2 numbers in a battery size are the diameter of the battery itself... and a GGTS can accept up to an 18mm diameter... the P&P from what I understand will use a 14500 size battery which is about the size of a AA...

Here is an ok battery size comparison picture not the batteries of choice but a good size table..

 

[BATHY]

Well thank you that's very good info, thanks for that think I will need get 14 battery then. You just saved me a big headache with that information.

 

[sodapopinski]

and if you buy the CT dont forget to grab the GGTS-Ody connector for the best results. Used my Ody on a stealth for a long time and just put it on a GGTS now I know what I've been missing!

 

[MrKrinkle]

Well thank you that's very good info, thanks for that think I will need get 14 battery then. You just saved me a big headache with that information.

Happy to help but as far as the battery for the P&P I would wait until Imeo can confirm the proper size battery before purchasing...

 

[MrKrinkle]

and if you buy the CT dont forget to grab the GGTS-Ody connector for the best results. Used my Ody on a stealth for a long time and just put it on a GGTS now I know what I've been missing!

I 2nd that, with the GGTS/Ody base is pure heaven... I will never use cheap unreliable Chinese 510 or 901 adapters again... 100% Greek GG perfection in connection all the way...

 

[BATHY]

Ct. what's that. Only been using a 18350 that came with it. So not got the power captain. At the moment.!

 

[MrKrinkle]

Ct. what's that. Only been using a 18350 that came with it. So not got the power captain. At the moment.!

CT is Control TOP or 510/901 Lid... thats the draw control section in the links I posted earlier for you #1 of the things you need to upgrade your stealth... the GGTS/ODY base replaces the brass top cap/lid and uses the collection tank body as the connection point rather than using adapters to connect your ODY to the GGTS...

Ill throw up some pics to help explain it better...


The 1st pic shows the complete assembly, the 2nd pic shows the Brass top cap/Lid that is replaced by the GGTS/Ody base which is pic #3...

 

[Fanky]

I was wondering what do you need to make a GGTS if I have a stealth and UFS?

 

[MrKrinkle]

I was wondering what do you need to make a GGTS if I have a stealth and UFS?

with a UFS all you will need is the Telescope Section and Top Tube because the UFS has its own Draw Control Collection tank assembly... Items 2 & 3 listed on post #6 on the first page of this thread...

 

[BATHY]

Any advice for my forthcoming GG purchases would be appricated.

 

[martinc]

Ody can be used on stealth cap,in fact its was originally meant to be used on a stealth cap.

I got the GGTS base for it and reverted to the stealth cap.

Beat me.

 

[Fanky]

with a UFS all you will need is the Telescope Section and Top Tube because the UFS has its own Draw Control Collection tank assembly... Items 2 & 3 listed on post #6 on the first page of this thread...

Thanks Mr K. I love how helpful GG peeps are.

 

[SuperSonic]

Soon GGTS will have VV or VW and this is the only thing a Provari can do that a GGTS cant....

Mr K. Do you have some inside information on this?

I had an order in for the ProVari VV Chrome Blue but cancelled it before it processed. (Was taking way to long to process anyway) - Just my gut telling me to do so.... and I "Always" listen to my intuition. I haven't ruled out purchasing a owning a ProVari. I do like the device.

Basically the only reason for ordering the PV in first place was 1) It is a nice looking mod in Chrome IMO 2) On the fly Voltage Settings / Ohms readings. Nothing my Volt Ohm Milli-amp Meter doesn't do... it's just convenient. And a pricy convenience as well.

The last couple of days studying the GG Wikis and additional information... I'm kinda getting a tad hellbent on a GGTS V2.

Love the craftsmanship, design, look, and size.

I'm doing only the rebuildable atomizer... so depending on a MM / CM of + / - RW ohm fluctuate and can easily fluctuate away from a sweet spot while using a hard voltage / wattage. I just wish there was a way (aside from using the Kick from Evolve) to vary the voltages as the ProVari does.... .1 volts at a time.

I know the battery sizing and changing the batteries will put you in different ranges of voltage but I'd really like to be able to slightly pan the voltages. I don't really care that it says 3.9 or 4.6 on an LED readout, but just knowing that I'm not gunning to prematurely burn out or flood a coil (LR Coil Hi V's or HR Coil Lo V's). I'd prefer to let the flavor do the talking.

I may be making more of this than there really is... but again I haven't acquired the experience yet to confirm my assumptions.

A VV within a GG sounds like a brilliant idea. Just wonder with all the development and crafting that Imeo is currently involved with, how long off an idea of such will take to actually get to market??? - Just thinking out loud.

Anyone with any Kick + GGTS experiences please feel free comment.

Peace-