- Status
Kelly,
My pleasure good sir. At first I dismissed them because of their price point. But then found out it wasn't just an LED display, but a battery revitalizer. That's when I decided the price tag was justified.
My pleasure good sir. At first I dismissed them because of their price point. But then found out it wasn't just an LED display, but a battery revitalizer. That's when I decided the price tag was justified.
To our valued customers:
After much consideration and review of information, we will no longer be providing the Ikenvape line of products. We apologize for any inconvenience due to this decision.
After much consideration and review of information, we will no longer be providing the Ikenvape line of products. We apologize for any inconvenience due to this decision.
The SVD is now in stock. iTaste SVD
Black MVP now in stock Itaste MVP
ProTank spare coils restocked. Kanger Protank coils 1.8Ω
Black MVP now in stock Itaste MVP
ProTank spare coils restocked. Kanger Protank coils 1.8Ω
Hi Switched, I recently acquired a 50 Cal, #06, and was wondering if you could help me out with a little difficulty I'm having with it.
It takes a strong pull to get it to start vaping and not so strong a pull but tough nonetheless to continue the draw. I tried backing the atomizer off a little and it helped but not enough and I can't back it off any more without losing contact. I've ordered a couple new 801 mini's for it but don't know yet if that will help. Any advice would be greatly appreciated.
It takes a strong pull to get it to start vaping and not so strong a pull but tough nonetheless to continue the draw. I tried backing the atomizer off a little and it helped but not enough and I can't back it off any more without losing contact. I've ordered a couple new 801 mini's for it but don't know yet if that will help. Any advice would be greatly appreciated.
Last edited:
Hey good buddy, it's a 20mm not a 50, as I haven't sold a 50m since last fall 
You can back off the atty slightly and make up the difference with the adjustable pin in the top connector. Point of interest the 801 is a stiffer draw than what you are accustomed to. Hope this helps!
You can back off the atty slightly and make up the difference with the adjustable pin in the top connector. Point of interest the 801 is a stiffer draw than what you are accustomed to. Hope this helps!Actually it is a 50 Cal. I should have been more specific. I purchased a slightly used but still in good shape 50 Cal. It is #06. I'm hoping the center pin is adjustable on this model as well as the new one. By the way, I just got my new 20mm in the mail today. I love it. It's huge!
Yup! the pin is definitely adjustable in the 50. Make sure you clean your contact points periodically. I use the eraser end of a wooden pencil. It does the jod and doesn't file away (sand off) metal
Okay, thanks for the info. I will definitely give your suggestions a try. Thanks for getting back to me in a timely manner. Pete
I have another issue for you Switched. I just received my 22mm yesterday and I'm not able to install the drip tip into the atomizer. The o-ring appears to be stopping it. If I remove the o-ring, it will fit loosely, but I'm able to get a tight draw. Can you offer any advice? Is there perhaps a smaller o-ring?
Try applying a few drops of liquid and twisting on the way in. Like a virgin lub, leads toward satisfaction. Please let me know how you make out
Try applying a few drops of liquid and twisting on the way in. Like a virgin lub, leads toward satisfaction. Please let me know how you make out
I'm not making out so good with it. It's such a close fit without the o-ring that there just is no room for the rubber to fit into. Are you hearing of a similar problem with others? Maybe I just need to replace the drip tip?
In any case I want to thank you again for your efforts to resolve this issue.
Resolve the issue? I haven't done anything to resolve the issue yet 
But resolve the issue I will. A new one will be in the mail tomorrow
But resolve the issue I will. A new one will be in the mail tomorrow Resolve the issue? I haven't done anything to resolve the issue yet
Sweet! You rock man! I will let you know how it works. That's great, thanks..........Pete
Got my son's 20mm yesterday. Works great. Drip tip fits nicely. Nice vapor. Quality work my man!
Thank you Pete, your replacement tip (hot off the press) was mailed yesterday. This one should work, well it does on mine LOL.
- Status
Similar threads
- Locked