The original AdapteveR

[WhateveR]

I got mine today and it SHORE IS PURTY!! My box was in perfect condition. My batteries and charger came today too. Unfortunately, the battery charger I ordered from Battery Junction was not made to charge the batteries I ordered from them. 8-o What's bad about it is they recommended the charger for use with the batteries. Needless to say, I was on the phone immediately! They were nice enough and are sending out a replacement tomorrow. Luckily, the batteries I bought had a charge on them so I am vaping on my little beauty as I write this. The Adaptever is a fine piece of workmanship. Great job Thad!

thank you so much... and I am glad it arrived safely...

batteries batteries batteries... I will carry them... just have to buy a bunch... I know this has been the biggest issue for everyone...

 

[olderthandirt]

Evening Thad. Great day for the mail it appears. Got the 510 adapter and as I'd hoped, it is a perfect match with the AdapteveR. Now I've got the battery to properly support the 510 atty.

Thanks

And my box wasn't crushed.

 

[WhateveR]

Evening Thad. Great day for the mail it appears. Got the 510 adapter and as I'd hoped, it is a perfect match with the AdapteveR. Now I've got the battery to properly support the 510 atty.

Thanks

And my box wasn't crushed.

very cool.. please let me know how you like it.. this is very new and I use mine everyday... but I have to be honest... I still like the 901 slightly better... personal preference I know, but just curious as the 510 and 901 are evenly matched in a lot of ways...

 

[olderthandirt]

very cool.. please let me know how you like it.. this is very new and I use mine everyday... but I have to be honest... I still like the 901 slightly better... personal preference I know, but just curious as the 510 and 901 are evenly matched in a lot of ways...

I use both 901 and 510 regularly. I've been carrying both daily for a couple of months. Rotate the 2 hit for hit. Full on flavor with the 901 and throat hit with the 510. Main difference now is having the 510 on a REAL battery!

I'm using 16340's in both PV's. With a 901 on both the SD and the AdapteveR the batteries would stay around 4v most of the day. That seems to be my 'sweet' spot. I expect the battery on the Adaptever to not last quite as long now that I've got a 510 on it. Find out over the next couple of days.

Later

 

[SmaBob]

Is there an extension ring so it can become a 6 volt unit?? and
will (2) Ultra Fire TR 15270 3.0v fit??

Looks like a great product !!!

Bob

 

[WhateveR]

Is there an extension ring so it can become a 6 volt unit?? and
will (2) Ultra Fire TR 15270 3.0v fit??

Looks like a great product !!!

Bob

absolutely a 6v HVS (high voltage sleeve) sleeve is on the way... it will be available as an option over the next weeks... it will support 2 standard CR2 batts...

thank you!

 

[mamacat]

absolutely a 6v HVS (high voltage sleeve) sleeve is on the way... it will be available as an option over the next weeks... it will support 2 standard CR2 batts...

thank you!

So, what I am understanding from this statement is that I can buy the sleeve for the AdapteveR that I already own and get 6 volts without doing very much? (i.e., attach the sleeve, add another battery and vape on.) I truly am not mechanically inclined - that is why I ask.

 

[SharonLM]

absolutely a 6v HVS (high voltage sleeve) sleeve is on the way... it will be available as an option over the next weeks... it will support 2 standard CR2 batts...

thank you!

Right now I've got the Adapter that uses a 901 atty. Are you telling me I can order a "sleeve" and just put my adapter on it, put two CR2 batts in it and start vaping?

If so, PLEASE may I pre-order. PLEASE PLEASE PLEASE

 

[mamacat]

Right now I've got the Adapter that uses a 901 atty. Are you telling me I can order a "sleeve" and just put my adapter on it, put two CR2 batts in it and start vaping?

If so, PLEASE may I pre-order. PLEASE PLEASE PLEASE

ROFLMAO - almost the same as I posted about 20 minutes ahead of you. Great minds think alike.

 

[SharonLM]

ROFLMAO - almost the same as I posted about 20 minutes ahead of you. Great minds think alike.

Mamacat, do you think if we say with sugar on top it'll work? Or ladies first? Nah, we won't go that far, but hey, it's a thought. LOL

 

[mamacat]

Mamacat, do you think if we say with sugar on top it'll work? Or ladies first? Nah, we won't go that far, but hey, it's a thought. LOL

We won't go that far yet...rofl...

 

[WhateveR]

Right now I've got the Adapter that uses a 901 atty. Are you telling me I can order a "sleeve" and just put my adapter on it, put two CR2 batts in it and start vaping?

If so, PLEASE may I pre-order. PLEASE PLEASE PLEASE

that is exactly right... I am sorry, but I don't do preorders right now... too many problems for all... I do plan to release the HVS(6v) along with the 801 over then next weeks...

 

[SharonLM]

that is exactly right... I am sorry, but I don't do preorders right now... too many problems for all... I do plan to release the HVS(6v) along with the 801 over then next weeks...

Well just drat Sir

 

[mamacat]

Batteries are in town - now I am going to start stalking the mailman again!! lol

 

[SKYYcamel]

I just found this great case today. I got it at Walmart, but Amazon has them too. It's the Case Logic TBC302. The Adaptever fits nicely in the outside zipper pocket (without the atty attached) and atty's, juice etc fit into the big pocket. Has a belt loop and clip.http://www.amazon.com/Caselogic-TBC...rt.com/catalog/product.do?product_id=10929532

 

[SharonLM]

I just found this great case today. I got it at Walmart, but Amazon has them too. It's the Case Logic TBC302. The Adaptever fits nicely in the outside zipper pocket (without the atty attached) and atty's, juice etc fit into the big pocket. Has a belt loop and clip.http://www.amazon.com/Caselogic-TBC...rt.com/catalog/product.do?product_id=10929532

Link didn't work

 

[SKYYcamel]

Link didn't work

Hi Sharon. Sorry bout that. Just Google "Case Logic tbc302".

 

[SharonLM]

Hi Sharon. Sorry bout that. Just Google "Case Logic tbc302".

OK, thanks!

 

[olderthandirt]

Hey sharon, skyy averyone else
I have been using a smaller case that I had gotten from A-ZDarts for carrying my mini's. The Casemaster Super Bee. It carries 2 complete 901's or 510's plus extra attys, batteries and a 3ml bottle of juice. Small enough to carry in a shirt pocket.

I just ordered the Unicorn Midi Wallet from them about 30 minutes ago.
Unicorn Dart Cases

These guys are fast. I e-mailed asking what the dimensions were and they replies in about 1 hour. Placed the order and it was posted for shipment within 30 minutes.

Anyway, the dimensions they gave me are
Midi Wallet
6 3/4" x 2 7/8" x 1"

Hopefully this will allow me to carry my SD and AdapteveR assembled instead of pulling the atomizer off.

 

[SKYYcamel]

Hey sharon, skyy averyone else
I have been using a smaller case that I had gotten from A-ZDarts for carrying my mini's. The Casemaster Super Bee. It carries 2 complete 901's or 510's plus extra attys, batteries and a 3ml bottle of juice. Small enough to carry in a shirt pocket.

I just ordered the Unicorn Midi Wallet from them about 30 minutes ago.
Unicorn Dart Cases

These guys are fast. I e-mailed asking what the dimensions were and they replies in about 1 hour. Placed the order and it was posted for shipment within 30 minutes.

Anyway, the dimensions they gave me are
Midi Wallet
6 3/4" x 2 7/8" x 1"

Hopefully this will allow me to carry my SD and AdapteveR assembled instead of pulling the atomizer off.

Looks nice. Tell us what you think after you receive it.