Ok so Busy morning.
This is the result.
The Gizmo, it works using the internals from a PCC.
It will do the following.
1. Use either a 901 or Titan Atomiser, or both if you feel the need.
2. While the internal Batt is charging use as a USB passthrough 901 / Titan
3. Long life internal Batt.
All the leds work as they should with one exception.
Bottom led Red for charging / Green for charged.
Middle LED red when Charge running low.
Top LED while vaping will light up.
Now I'm adding another switch and two atomiser connections.
Once the switch is in charge mode, you can also charge Titan / 901 batts.
As per the PCC 4 bats can be charged from flat ish on one unit charge.
Once the switch is in charge mode the top led will be constant red and go out once a batt is charged.
This is the result.
The Gizmo, it works using the internals from a PCC.
It will do the following.
1. Use either a 901 or Titan Atomiser, or both if you feel the need.
2. While the internal Batt is charging use as a USB passthrough 901 / Titan
3. Long life internal Batt.
All the leds work as they should with one exception.
Bottom led Red for charging / Green for charged.
Middle LED red when Charge running low.
Top LED while vaping will light up.
Now I'm adding another switch and two atomiser connections.
Once the switch is in charge mode, you can also charge Titan / 901 batts.
As per the PCC 4 bats can be charged from flat ish on one unit charge.
Once the switch is in charge mode the top led will be constant red and go out once a batt is charged.

