The Poldiac Fan Club
- Thread starter SilverCloud
- Start date
- th_trl_thread_readers 0
- Status
No need to wait on me EZ, I bought the OverOnes because my friends who own them highly recommended them and because of all the good reviews. Nikki did a review not too long ago when she got hers, you can read about it here: OverOne RDA Review | Vaping Cheap
If your on the fence about getting one, now is the best time because they are on sale
The OverOne is a great flavor atty, and it makes respectable clouds too, bro.
I love mine to itty bitty pieces.
Poldiac Cloud Wizard with OverOne dripper by zipflint, on Flickr
OverOne 0007 by zipflint, on Flickr
I love mine to itty bitty pieces.
Poldiac Cloud Wizard with OverOne dripper by zipflint, on FlickrOverOne 0007 by zipflint, on Flickr
I dig those drip tips. What are they and where'd you get 'em?
Customized them from these Glass Drip tips I had laying around.
I think I bought them at fasttech awhile back, came in a 5 pack.
Im sure you can locate them Stateside rather easily
Basically I just broke the glass, scraped off the glue and bits and then washed.
Took all but 5 minutes each and I think they look great with the OverOnes extended drip tip holder.
I got some room to bore the thru hole bigger so I will do that at the shop tomorrow for some further customizing
Congrats
I don't think you will be disappointed Since you got a pair of Poldiacs, did you get the polished or satin one (or both?) to match your new mods?
LOL. I ordered a satin and a polished. Figured if I was going pay for FedEx shipping, I might as well make it one package.
I'm loving these Poldiacs. Been using it this evening with my Aspire Atlantis. These hit hard. Already gone thru 1/2 tank in 4 hrs. Thought I was going easy!
I'm loving these Poldiacs. Been using it this evening with my Aspire Atlantis. These hit hard. Already gone thru 1/2 tank in 4 hrs. Thought I was going easy!
Got mine in today, but I'm going to wait until I'm sure of my RTA build (using a Fogger V5). The last thing I want is to have juice leak all over it...this thing looks too good to ruin it...
Very cool
You will have to share some pics of your setups when you finally match your incoming OverOnes with your new Poldiacs Congrats to everyone on your new Poldiacs and OverOnes.
I have been using MMVapors products for about a year and a half now and I can say they are the best designed and built vaping equipment I have ever purchased.
The sales Jim has been running lately have been some really good deals and the exchange rate between the dollar and the euro is quite good also. I think I paid over $200 for the first Poldiac I purchased. (the exchange rate was around 1.40 to 1 at that time)
If any of you use bottom feeding devices I understand Jim is going to be working on bottom feeding for the OverOne.
I have been using MMVapors products for about a year and a half now and I can say they are the best designed and built vaping equipment I have ever purchased.
The sales Jim has been running lately have been some really good deals and the exchange rate between the dollar and the euro is quite good also. I think I paid over $200 for the first Poldiac I purchased. (the exchange rate was around 1.40 to 1 at that time)
If any of you use bottom feeding devices I understand Jim is going to be working on bottom feeding for the OverOne.
Built one of my OverOne's at work today, not my best build but is working great with what I had on hand this morning
Dual coils, 5 wraps of twisted 30G with a 2.5mm inner diameter came out to 0.48 ohms.
At 4.2V that comes out to 8.75 amp at 36.75 watts with a pleasant heat index of 170 mW/mm2.
shot of the coils:
centered the coils in the middle of the airslot:
Very pleasant vape, the wide air slots are really nice. It produces great flavor for me with decent clouds, Im quite pleased with it!
Dual coils, 5 wraps of twisted 30G with a 2.5mm inner diameter came out to 0.48 ohms.
At 4.2V that comes out to 8.75 amp at 36.75 watts with a pleasant heat index of 170 mW/mm2.
shot of the coils:
centered the coils in the middle of the airslot:
Very pleasant vape, the wide air slots are really nice. It produces great flavor for me with decent clouds, Im quite pleased with it!
Tihihiii .. I just saw some of your OverOne/Poldiac porn in another thread, congrats hun on the sweet set ups.
Built one of my OverOne's at work today, not my best build but is working great with what I had on hand this morning
Dual coils, 5 wraps of twisted 30G with a 2.5mm inner diameter came out to 0.48 ohms.
At 4.2V that comes out to 8.75 amp at 36.75 watts with a pleasant heat index of 170 mW/mm2.
shot of the coils:
centered the coils in the middle of the airslot:
Very pleasant vape, the wide air slots are really nice. It produces great flavor for me with decent clouds, Im quite pleased with it!
I finally got the hang of building my coils (which was actually easy, once I had the right tools to do it) and getting the wicks in (which was a bit harder, but I got it done..
). Unboxed my Podiac, and it was everything I could hope for, and here I sit, happily vaping away. My question: is there a vendor in the U.S. where you can order the tanks that MMvapors makes, or do the majority here order directly from them?
). Unboxed my Podiac, and it was everything I could hope for, and here I sit, happily vaping away. My question: is there a vendor in the U.S. where you can order the tanks that MMvapors makes, or do the majority here order directly from them?I finally got the hang of building my coils (which was actually easy, once I had the right tools to do it) and getting the wicks in (which was a bit harder, but I got it done..
I have always ordered directly from MMVapors. I have seen a couple of US sites selling the Poldiacs and one site selling the OverOne. I don't recall any sites selling their tanks.
I finally got the hang of building my coils (which was actually easy, once I had the right tools to do it) and getting the wicks in (which was a bit harder, but I got it done..
Congrats to you, anything made by MMV is fine choice. As Portertown said you are more likely to find one of MMV's mechanical mods being sold here in the US. MMV has such fast shipping that it really is no different than ordering here in the US.
The problem is even though the products rock, they aren't what's popular or very well known ( cept the did, everyone's cloned that to death), so a lot of vendors aren't going to risk stocking it, I just can't see a lot of newer vapors going sure! I'll take the hard to master genesis for $175 over a 40 dollar goblin. Lol
I'm waiting to settle in to my new job and that tns hybrid is gonna be on the way
I'm waiting to settle in to my new job and that tns hybrid is gonna be on the way
Last edited:
Been using my Poldiac for about a week now.
I can tell; sometime this Summer, I'm going to put in a larger order from MMVapors. This is easily the mod (either VV/VW or mech) that I have used to date. Kind of seems right that I have the proper tank to sit on top of this awesome device...
I can tell; sometime this Summer, I'm going to put in a larger order from MMVapors. This is easily the mod (either VV/VW or mech) that I have used to date. Kind of seems right that I have the proper tank to sit on top of this awesome device...
- Status
