The problem was 100% to do with my atty! (update)

Status
Not open for further replies.

Patrick21

Super Member
ECF Veteran
Verified Member
Sep 3, 2011
524
50
34
Midlands, United Kingdom
As some of you will know i made a few threads yesterday about problems with my DSE 901 not vaping properly... not getting any throat hit etc; even after trying cleaning the atty in several ways.

A few people thought that the juice could be the problem which i doubted in the first place but now i have proven that the whole probelm relies on the atty itself.

Now... somethign i didnt try yesterday which i should have done was to drip into my old ecig atty and use my old ecig... WORKS LIKE A CHARM! take the carts out of my old model and drip directly into it and vapes like a beast, love it and will do me just fine until my new attys for my DSE 901 come from LF.

So basically the whole problem relied on the faulty atty not the juice ;)
 

tj99959

ECF Guru
ECF Veteran
  • Aug 13, 2011
    15,116
    39,600
    utah
    i sure hope it wont because that is how I vape every evening. It's called direct dripping, and is far surperior to using a cartridge.
    You will want to get yourself a drip tip tho'.

    901's tend to leake quite a bit when dripping however, but you will find that drip shields turns 901's into one of the lost treasures of vaping.
     
    Last edited:

    kinabaloo

    Vaping Master
    ECF Veteran
    Just be careful not to add too much liquid if it's an auto battery.

    Didn't see the original thread but sunds like you had a contact problem - not electrical (in this case) but of the cart filler to the atty bridge. It's common. I would put a pea sized blob of extra filler onto the bridge then add the cart.

    But those days are gone now - catomisers are way better.

    And an 808 is like two 901 vaped simultaneously. (I have the S808 - basically a generic).
     

    AttyPops

    Vaping Master
    ECF Veteran
    Jul 8, 2010
    8,708
    134,330
    Hc Svnt Dracones - USA EST
    Now wait a sec. I cry "foul!". (Holds up yellow card) Just to be fair........

    The other post said you got tons of vapor but no TH. Now this post says you switched devices AND atomizers (I assume using the same jucie) and now you get plenty of TH. OK fine. But you can't ask us to solve an issue on one set of equipment, switch, and then say that the juice didn't need more TH. Just say'n.

    Now... What are the devices in question? Just so we know (and you add to the knowledge base here) what worked and what didn't? What specific atties and specific batteries are we talking about here (Yeah... I know they are 901s.. but what? And what battery?)

    And welcome to dripping.
     
    Last edited:
    Status
    Not open for further replies.

    Users who are viewing this thread