The path of air flow thru a CE2 is the same path of juice when attached to a bottom feeder. CE2's are designed to be filled with juice from the top and the silica ropes dangling in that juice will wick it to the coil. Feeding juice from the bottom on a Reo is possible, but presents some difficulty unless you're using a clearomizer version of a CE2 and can see the juice level. Even then, the path of juice from the bottom, up the air tube, and into the body of the CE2 cartomizer is constricted not at all easy peasy. You could squeeze the bottle and simultaneously draw on the CE2 without firing it until juice saturates the wick at the coil, and then vape from it, but you're essentially using it as a badly designed atomizer at that point. If you're interested in modding your CE2's into atomizers, there's a thread somewhere out there with instructions. If you want to read it, just say so and I'll go find it and paste the link here.
Boge cartos work great. Many carto users recommend prefilling them with juice and giving them sufficient time for the juice to soak into the filler material before you start using them. I couldn't say with certainty exactly how long this should take, but letting them set overnight has been suggested many times by various Reonauts.
I dropped my baby off at school for the first time this morning. She was good , no tears. I had to hold back a few and managed to get out of her sight before I looked like an idiot.
