Thursday are friday of last week,should be going out today(CS) say's.Its free so no complaints here.
- Status
The one I have that is a little wounded is doing ok anyways,I do like the 1.8 carto's as well.
Vapage calls the outer portion shells on their site...
Outer shell is hard-anodized 7000 series aluminum
Multiple anodized colors available for the cone and outer shell.
These new (anodized on the prints?) colors are pretty cool, but function is more important to this vaper. I hung back on chassis replacement in hopes I would get them with the cup installed by them. I doubt that will be the case, so will muddle like everyone else. I have a good selection of hemostats, but these eyes are getting old
Looks like Vapage is gonna ROCK vapefest next month
Outer shell is hard-anodized 7000 series aluminum
Multiple anodized colors available for the cone and outer shell.
These new (anodized on the prints?) colors are pretty cool, but function is more important to this vaper. I hung back on chassis replacement in hopes I would get them with the cup installed by them. I doubt that will be the case, so will muddle like everyone else. I have a good selection of hemostats, but these eyes are getting old
Looks like Vapage is gonna ROCK vapefest next month
Haha!
I don't think Brian has settled on a term yet! Some emails he calls it a shell & some a body...
Me...I like bodies!
I don't think Brian has settled on a term yet! Some emails he calls it a shell & some a body...
Me...I like bodies!
yes they are, sure would be nice to be able to go. Maybe they will do a vapefest in like San Francisco or something.. I'd be able to go to that one as it would just be a day trip.. I'd be home at nite. That would be sweet!!!!
Here is something I think will enlighten and help in the feeding of your Vmods. Stolen from the IKV forum. No secret I am a fan and ran IKV exclusively until I found the hybrids. I did this same test on a blown out 2.0 BF hybrid to the same results with 80PG/20VG juice. The 5 second draw on vape 21 choked me just as good if not more 
Just got an email from vapage with a link,says access denied it had my order number from my first vmod,so I went to site and checked the order number and found nothing about a new chassis,just that the order was complete?
Well no vmod again today. Checked my email after scaring the mailman again, and there was an email form vapage saying that my order shipped today. Wonder why it took 10 days for my order to go from processing to shipped? The waiting game starts over for me.
So, I figured out the issue with my new chassis, it started happening with my original one too.
The atty began to die on me. Popped on a new one and it's hitting like a champ again. No wonder it wasn't drinking juice like normal lol
The atty began to die on me. Popped on a new one and it's hitting like a champ again. No wonder it wasn't drinking juice like normal lol
I have only placed two orders the first was over a month ago,the second was about three weeks ago and it was for carto's for the vmod.Nothing else is showing but those two orders.I'm sure the new chassis will make it here one day this week.
My guess is that USPS will be slower due to Irene. Airports closed messes with the mail system.
Vapage calls the outer portion shells on their site...
Outer shell is hard-anodized 7000 series aluminum
Multiple anodized colors available for the cone and outer shell.
These new (anodized on the prints?) colors are pretty cool, but function is more important to this vaper. I hung back on chassis replacement in hopes I would get them with the cup installed by them. I doubt that will be the case, so will muddle like everyone else. I have a good selection of hemostats, but these eyes are getting old
Looks like Vapage is gonna ROCK vapefest next month
tierrataz, if you have troubles you can mail it to me and i'll install it for you and send it right back. its pretty easy tho, i'm sure you'll get it after a few tries
I seem to remember some asking about macro pics of the catch cup, and not sure if this has already been done. But here are some close ups of the catch cup in place and a blurb at the bottom on how I did it.
I cut the "ignition" + wire slit with fingernail clippers. Used a drop of juice on the cup to lube it lightly as once it's in the cavity, you will most likely need to rotate it to where the slit will align to the + wire and the wire will fall into place within the slit. I used curved tweezers and a dental pick to get the cup in the cavity.
Hope this helps.
I cut the "ignition" + wire slit with fingernail clippers. Used a drop of juice on the cup to lube it lightly as once it's in the cavity, you will most likely need to rotate it to where the slit will align to the + wire and the wire will fall into place within the slit. I used curved tweezers and a dental pick to get the cup in the cavity.
Hope this helps.
tierrataz, if you have troubles you can mail it to me and i'll install it for you and send it right back. its pretty easy tho, i'm sure you'll get it after a few tries
TY Ken, very kind. Since I just put in for replacements, I don't expect to have them for a week or so. BTW, it is 4 chassis
Ya never know though. I ordered attys too, and maybe I will be surprised.
Most excellent shots! I like the lube tip.
I seem to remember some asking about macro pics of the catch cup, and not sure if this has already been done. But here are some close ups of the catch cup in place and a blurb at the bottom on how I did it.
I cut the "ignition" + wire slit with fingernail clippers. Used a drop of juice on the cup to lube it lightly as once it's in the cavity, you will most likely need to rotate it to where the slit will align to the + wire and the wire will fall into place within the slit. I used curved tweezers and a dental pick to get the cup in the cavity.
Hope this helps.
4 is no probelm, just let me knowTY Ken, very kind. Since I just put in for replacements, I don't expect to have them for a week or so. BTW, it is 4 chassis
Ya never know though. I ordered attys too, and maybe I will be surprised.
those are lazerrred a bit off topic...just put in a fresh BF hybrid annnnnnnnnnnnnddd it collapsed the spring on my brand new chasis....CRAP. shorted atty out the box fail grr...........
the one on the right is the new chasis that just had the spring collapse. kinda ...... conisdering i just got the upgraded chasis(works great btw) just to have it destroyed by a new BF hybrid that was short.
a bit off topic...just put in a fresh BF hybrid annnnnnnnnnnnnddd it collapsed the spring on my brand new chasis....CRAP. shorted atty out the box fail grr...........
the one on the right is the new chasis that just had the spring collapse. kinda ...... conisdering i just got the upgraded chasis(works great btw) just to have it destroyed by a new BF hybrid that was short.
Last edited:
- Status
Similar threads
