Hahaha!
Welcome to the Vmod Club....no funny ears, just sweet, sweet nicotine!
"And Sticky Hands" and "Wasted juice" 8)
- Status
"And Sticky Hands" and "Wasted juice" 8)
Good Evening my fellow vmodians
.
@tierrataz, I hope you and yours are safe, and very sorry to hear about your friend's tragedy. They will be in my prayers.
Hopin everyone is having a safe holiday weekend.
K, here comes another
?? I'm vaping my new chasis w/a 1.5 atty, vaping my old chasis w/a 1.8 silo. Why is the heat so dramatically different w/the 2? There is almost no heat w/the silo. My carto's got a whole lot hotter than the silo does. I don't have a thingy-ma-jig to see if it's mis-labeled or something. Batts are about the same on both as far as when I put them in & they're the same type.
@tierrataz, I hope you and yours are safe, and very sorry to hear about your friend's tragedy. They will be in my prayers.
Hopin everyone is having a safe holiday weekend.
K, here comes another
Hi all. Just back from a lovely vape meet in Glendora. Will catch up tomorrow after more sleep and less nic! I'm nic'd out and exhausted from so much fun, great people, fab party! LA Vapers Club rocks. Wish all you Vmodians would have been there. The frosting on the proverbial cake (gooey better cake).
Wish I could answer even one question, but it's going to take all my effort to find my way from this computer to the pillows.
Nite nite ~
Wish I could answer even one question, but it's going to take all my effort to find my way from this computer to the pillows.
Nite nite ~
Vikki, TY. Prayers for the animals that survived but with burns and smoke inhalation sure would be appreciated. About 100 did not make it
Without a "thingy-ma-jig" it's anyones guess. That would be a digital multi meter btw, and they can be had for about $5 online. All vapers using mods w/Li-ion or high drain batts should use a DMM. One batt could be weaker. To me comparing vape on an atty vs a carto is like apples to prime rib Attys can often settle into a lower resistance than advertised after they season, they can also start to go up in resistance when they are on the way to the bone yard.
A DMM is critical to know where your vaping gear is so you can get your best vape all the time
Without a "thingy-ma-jig" it's anyones guess. That would be a digital multi meter btw, and they can be had for about $5 online. All vapers using mods w/Li-ion or high drain batts should use a DMM. One batt could be weaker. To me comparing vape on an atty vs a carto is like apples to prime rib
Attys can often settle into a lower resistance than advertised after they season, they can also start to go up in resistance when they are on the way to the bone yard.A DMM is critical to know where your vaping gear is so you can get your best vape all the time
Good Evening my fellow vmodians.
@tierrataz, I hope you and yours are safe, and very sorry to hear about your friend's tragedy. They will be in my prayers.
Hopin everyone is having a safe holiday weekend.
K, here comes another?? I'm vaping my new chasis w/a 1.5 atty, vaping my old chasis w/a 1.8 silo. Why is the heat so dramatically different w/the 2? There is almost no heat w/the silo. My carto's got a whole lot hotter than the silo does. I don't have a thingy-ma-jig to see if it's mis-labeled or something. Batts are about the same on both as far as when I put them in & they're the same type.
Vikki, TY. Prayers for the animals that survived but with burns and smoke inhalation sure would be appreciated. About 100 did not make it
Without a "thingy-ma-jig" it's anyones guess. That would be a digital multi meter btw, and they can be had for about $5 online. All vapers using mods w/Li-ion or high drain batts should use a DMM. One batt could be weaker. To me comparing vape on an atty vs a carto is like apples to prime rib
A DMM is critical to know where your vaping gear is so you can get your best vape all the time
So sorry about your friend's loss of all of those beautiful animals
... Definitely including their remaining animals in my prayers !! Thank you for naming the thingy-ma-jingy for me
... Wish vapage sold them (maybe a hint?).. I have seen them @ most web sites that sell mods and batt's, so it shouldn't be hard to find one. I'm gona go out on a limb here and say the atty is the prime rib !! Can't learn if you don't ask, wondering never solved anything that I know of
.. ..
We absolutely MUST be THE most "Liked" thread on ECF. We've got 2126 posts, and 2526 Likes. Unbelievable. Are we having a love affair with our Vmods or what!
After repairing the crack in the old chassis and adding an o-ring to the bottle, Day 2 and no leaks. The o-ring not only provides an add'l seal, but greatly improves the bottle's stability.
I'm not quite ready to declare victory, but it's off to a promising start. Any idea if the outer cover and cone will be available? I'd like to put this one into everyday use along with the replacement chassis.
I'm not quite ready to declare victory, but it's off to a promising start. Any idea if the outer cover and cone will be available? I'd like to put this one into everyday use along with the replacement chassis.
Yes, Para, they will be available.
I think they will first be shown at the Vegas Vape Fest in a couple weeks-----but, there is always a possibility they will show up on their website first.
We've had a peek of some of the designs somewhere on this thread.
I think they will first be shown at the Vegas Vape Fest in a couple weeks-----but, there is always a possibility they will show up on their website first.
We've had a peek of some of the designs somewhere on this thread.
K, I must have missed the thread about adding an o-ring to the bottle. Where do you add it at?? Do you use the old upper o-ring that your supposed to throw away?? Or do we make one out of a condom?? I did make a catch cup for my old chasis, thanks AG
I too am waiting for the new chassis to come out for my nekkid vmod.. I think I can wait 3 more weeks ... I think I can, I think I can, I think I can ... Wonder if we get a discount if we order um say 3 ~ 5ish (hint hint )
I too am waiting for the new chassis to come out for my nekkid vmod.. I think I can wait 3 more weeks
... I think I can, I think I can, I think I can ... Wonder if we get a discount if we order um say 3 ~ 5ish (hint hint )After repairing the crack in the old chassis and adding an o-ring to the bottle, Day 2 and no leaks. The o-ring not only provides an add'l seal, but greatly improves the bottle's stability.
I'm not quite ready to declare victory, but it's off to a promising start. Any idea if the outer cover and cone will be available? I'd like to put this one into everyday use along with the replacement chassis.
After repairing the crack in the old chassis and adding an o-ring to the bottle, Day 2 and no leaks. The o-ring not only provides an add'l seal, but greatly improves the bottle's stability.
I'm not quite ready to declare victory, but it's off to a promising start. Any idea if the outer cover and cone will be available? I'd like to put this one into everyday use along with the replacement chassis.
Thanks Para...I appreciate your ability to see the forest.
If you have an o-ring which will fit around the top of the cup, it should improve the stability of the cup as well.
This is where they added the bushing.
I received my new chassis with rubber things. I have no clue if they are extras or need to be installed before use. Are the new chassis supposed to have a pin in them or do they look pretty much like the old ones?
The seals and cup in the baggy need to be installed.
Have you done any troubleshooting?
Was this the new chassis or the old one?
If I got a replacement chassis this week is it old stock (V1.0) or the new version (V1.1) ?
The replacements are all the updated chassis.
You can probably see where they pinned the chamber from inside the battery compartment.
The pressed in chamber on the older chassis could move around, causing some people to have failures.
The new chassis is rock solid in place with a pin and bushing.
It should cause no problems.
Did you fill out the replacement chassis form on the Vapage website?
You should do this, or contact them Tuesday.
They will have no problem making it right for you.
Thanks AlmightyGod , I sent them a email but I have gotton my replacement in already so I'm still good . It's working fine so far . The old one had just started losing a little juice but was working so good just to quit like it did . Maybe I can send it in and see what they said happen to it ?
The most common thing I've heard, is that if the connection cup started moving around, the solid connection wire could come loose where it attaches to the bottom of the cup.
- Status
Similar threads
