There's a section I am missing?
- Thread starter keepsmiling
- Start date
- th_trl_thread_readers 0
- Status
It's not a Provape product. The Twins will let you do that, I think Tatroe makes one & that German company who makes the fancy looking brass cap/ring sets has one as well I believe.
ETA:
Vaperev Shop - SS Twins
Tatroe Ring Provari Steel
(the name of that German company escapes me at the moment)
ETA:
Vaperev Shop - SS Twins
Tatroe Ring Provari Steel
(the name of that German company escapes me at the moment)
Last edited:
Tatroe Ring for Tatroe Base
Came up yesterday here:
http://www.e-cigarette-forum.com/forum/provape/602058-best-battery-provari-mini.html#post14106115
Came up yesterday here:
http://www.e-cigarette-forum.com/forum/provape/602058-best-battery-provari-mini.html#post14106115
Last edited:
Ahah...got it. Too bad they don't offer these as an option in the finish of each mini. It would probably look pretty goofy with my polished dragon. It would be nice to use the 18650's. I never use the two 18350's I bought.
It's not that difficult to polish stainless. I polished all 4 of my authentic KFL's to match my Provari & Poldiacs.
Hmmm..the one with brass doesn't look bad. Might be a nice option if you wanted to go to a party or somewhere and not carry an extra battery, to give you more time. I wonder what using the 18650 vs the 18490 does for performance? Any different?
Oh really? I could get it to match? That would be sweet.
What would you use to polish it?
I'm pretty sure this one will match the Dragon...they call it Chrome, but I believe it matches the polished finish.
Tatroe Provari Ring Chrome
Tatroe Provari Ring Chrome
Oh really? I could get it to match? That would be sweet.
I made some jigs to do it on a lathe, but that just speeds up the process & makes it difficult to get it uneven. You can do it by hand as well. You just sand it up to 1200 (600 will work, but if you look really, really close you'll see a slight difference) & use a buffing compound to polish it. Personally, I use 2 different compounds, a hard & soft, to get it to match the polished Provaris.
Chrome looks pretty close but it won't hold up like the polished stainless will. You just have to be careful with it. If you want one polished up & don't want to put the work into it, send me a PM.
Or you can use a poor man's lathe... I took a philips screwdriver with a handle that was slightly smaller than the inside diameter of the Tatroe ring, and put the screwdriver in my cordless drill. I then wrapped enough electrical tape around the end of the handle to securely hold the Tatroe ring in place (the tape goes around the handle, on the inside of the Tatroe ring). Then I put a glob of Flitz polish on a microfiber cloth, and polished the spinning Tatroe ring for about 10 minutes. Went from brushed to a beautiful polished finish without much effort. Can't imagine how long that would take to do by hand.
Last edited:
I'm not sure. I think they sold it in pieces at one time.
When I went to check on the site Yesterday, it looked to me like they did not have any stock.
With the P3 coming out they may end up discontinuing those products.
Provape is sold out right now on the Tatroe base but when you order one of them you have the option of ordering a extension with it.
Tatroe ProVari Wide End Cap with Spring
I like GR-Modders, a ECF member named Kir Fanis makes tanks and accessories just for the ProVari
Provari accessories - Gr-Modders
I just posted a pic that shows some of my Kir Fanis stuff
http://www.e-cigarette-forum.com/fo...ti-saloon-iv-back-alley-107.html#post14111776
Tatroe ProVari Wide End Cap with Spring
I like GR-Modders, a ECF member named Kir Fanis makes tanks and accessories just for the ProVari
Provari accessories - Gr-Modders
I just posted a pic that shows some of my Kir Fanis stuff
http://www.e-cigarette-forum.com/fo...ti-saloon-iv-back-alley-107.html#post14111776
I am not a fan of the tatroe flanged base look. Now I am a little confused..but none of these sites are presently offering an extension that is polished, correct? I just want a good sleeve with smooth threads that allows me to use the larger battery, but still maintain the straight look.
Hi, an update. I wrote to the GR-Modders guys. They said if I am already using the 18490 batteries, all I needed was this~Provari extension by Kir Fanis - Gr-Modders
I ordered one in polished. I will post back how it looks with a pic when it comes in. Thanks for everyone's help, and thanks for the link FC!
I ordered one in polished. I will post back how it looks with a pic when it comes in. Thanks for everyone's help, and thanks for the link FC!
- Status
Similar threads
