Thinking about getting one of these...

[Kismayaz]

I just started vaping again with the echo. I got a good deal off the classifieds, and ended up with a lot of cartomizers. I'm looking into one of these high end VV mods, and the buzz pro looks promising. If I get it with an 808 connection, it should take these cartomizers, eh?

Just wondering if anyone else has tried this, and looking for some input as well.

I also have a bunch of rcr123a tenergy batts. Will they work on the buzz pro?

Thanks

 

[Icoth]

If your batteries are 3 volt LiPOs they won't work with the buzz.

 

[mistinthewoods]

If your batteries are 3 volt LiPOs they won't work with the buzz.

Well......... they might work but they'll lose their charge pretty quickly. You need a 3.6 or 3.7 volt battery for the Buzz Pro to work right.
If your cartos are 808 cartos they should work fine with an 808 cap.

 

[BuzzKill]

I have NOT tested the 3.0 volt batts on the Buzz Pro BUT they should be ok at lower voltages ( below 5 volts ) for ???? not sure how long ?? they will work however , the cartos should be ok as well .

 

[cosmic charlie]

I tried some 3.2v I had and got about an hour out of them they drop voltage pretty quick I think

Sent from my DROID2 using Tapatalk

 

[BuzzKill]

I am ordering some 3.0 volt batts CR123 to test this guys , In theory they should be fine with lower voltages BUT I need to test this idea.

 

[5cardstud]

My Buzz Pro is an 808 and it's my fav connection. 808 cartos will work fine on it. He has put a very good 808 connector on it and I've not had any problems with it. I would however, as has been mentioned already, get some 3.7 volt batteries if your looking to get any vaping time on it.

 

[BuzzKill]

I just ordered some 3.0 volters for testing , also 120 of the Newer Powerizer batts for stock

 

[Iluvthearmy]

I have a package of them right here in front of me and they do not work. the pro won't light up and the original just flashes red once and dies out. I tried them fresh out of the package and know they are good as they are now in my little sure fire rifle light. Sorry guys.

These are Panasonic CR123A 3V and surefire brand also.

 

[BuzzKill]

I have a package of them right here in front of me and they do not work. the pro won't light up and the original just flashes red once and dies out. I tried them fresh out of the package and know they are good as they are now in my little sure fire rifle light. Sorry guys.

These are Panasonic CR123A 3V and surefire brand also.

Good to know ILA !! thanks !

 

[5cardstud]

I have some I could try too but why?

 

[Kismayaz]

damn, so now i have to buy some more batteries too.

 

[Iluvthearmy]

No worries though Kismayaz, I've used the same pair of batteries for about 5 months now. It's not a bad deal at all.
Also the 808 top cap worked just fine on my original buzz. Have 510 on the pro so I can't comment, but I highly doubt they got worse over the pro upgrade.

 

[Iluvthearmy]

no problem buzz.

 

[5cardstud]

Ya like Army said. I got some that are over a yr. old and now with the Buzz Pro it is even easier on batts. BTW your Buzz Pro case is a great idea.