Thinking of getting a mod, whats your dream mod?

[omgitsthr33]

I have heard good things about the Chuck; the custom logo thing peaks my interest.

But a mod that had an auto feed system that didn't leak would be my "dream mod" for sure.

 

[UntamedRose]

A Wizard! (kidding......kinda)

I want a 5v juice feed mod that isnt box shaped, or weird hand mold....in lots of prudy colors
and an ehooka( a real one) for my desk

 

[vip0802]

i have tiny hands so i like mods that are smaller, but i wouldn't mind having something bigger for home use. i would love to have a Joker, a Chuck and a Fist Pack (you can adjust to different voltages). my list of dream mods are always changing though, but this is it for now.

i just got my Precise (my first mod) and i really do love it...it's a thing of beauty!

i'm thinking of getting the stainless steel end caps and battery button so i can change up the look. t's true, the battery life isn't the greatest but what i sacrificed that for was a super slick, well built and sturdy PV. it's definitely not something i can use all day long, but i love that i have it in my collection. if David from Super T comes out with the Super 6 again, i'd want one of those too.

 

[wisteelersfan]

I love my precise! And if you use cartos on it instead of a LR atty, the battery life isn't actually that bad considering it's size. And you could always order the 16340 or 18650 version. And I'm really considering ordering a 14500 Precious. And the box mod nephilim sent me is great too!!

 

[BradSmith]

I want one made from a Mag Light that holds 6 D sized lithium's. Not only could I vape for a month but if I had to I could crack someone over the head with it!! Of course it should also come with a 30ml auto drip system.

Can you imagine busting that one out at work??

 

[KarrMcDebt]

Well, My dream "Box Mod", or at least the latest dream is a 4xAA box mod that uses a usb passthrough circuit, a three way switch and a T.I. 5v booster chip. The switch would allow for selection of 3.7v or 5v or off. Could be used as a usb passthrough, or a built in USB battery charger.

 

[BradSmith]

Well, My dream "Box Mod", or at least the latest dream is a 4xAA box mod that uses a usb passthrough circuit, a three way switch and a T.I. 5v booster chip. The switch would allow for selection of 3.7v or 5v or off. Could be used as a usb passthrough, or a built in USB battery charger.

I'm lovin the 5 volt box mod you made for me. So if you ever make one of your new ones let me know.

Keep rockin, Brother.

 

[redgirl]

Well, just got the mod I've been wanting for a while, The 5V Joker! I've been waiting to order it for months and preorder just opened up a little bit ago. It has built in circuit protection where it will shut down automatically if there is any issue, and it's magenta!

Don't know if ahyone has seen this thread, but a 5V juice fed mod would be sweet, if only more people start making them:

http://www.e-cigarette-forum.com/forum/modders-forum/93773-draggin.html

 

[Dudeman]

Another vote here for the Precious but it's a bit too pricey for me.
Close second would have to be a Silver Bullet.
Third choice is a Pro Vape1.
Fourth is the Vape Stack.

 

[candre23]

My dream mod hasn't been made yet, though the fistpack is close. Most mod manufacturers have shown shockingly little desire to innovate or increase efficiency. The perfect mod needs the following features:

• Two-cell Li-ion or LiPo power - Single cells have difficulty providing the current necessary for a proper vape, especially when used with voltage boosters. The result is that single cells are overworked and wear out prematurely. Two or more cells it the ideal setup.
• PWM voltage/current control - Most 2-cell mods use resistors or linear regulators to bring voltage down to a desired level. This is inefficient and wastes extra voltage as heat. PWM control wastes no power and provides longer battery life.
• Digitally variable voltage - Up/down buttons and a small LCD display are needed for setting the desired voltage.
• USB charging/passthrough - Multiple cells makes this slightly more complicated, but certainly not impossible. A cell balancing circuit is needed to ensure proper charging.
• Quick-change atty connectors - A bayonet-style (BNC) connector would be ideal. This would allow the mod to use any of the popular attys without needing adapters.
• Reasonably priced - Nearly all mods are ridiculously overpriced. Box-of-parts cost for the average mod is under $10. Even a complex mod like the one I propose could easily be sold for under $50 if produced in quantity.

Something tells me I'll be waiting a while for this to happen.

 

[mini_art]

Thanks for all the replys! I am loving reading this,
could you please post who makes your dream mod or where to go look at it when you tell us what it is?

 

[mini_art]

edited because
forum is acting wonky this morning

 

[keyzygirl]

I have a pink BB.I use it at 3.7 but it can also be used at 6v.Its very solid and the button is perfect.Plus,its pink!need I say more?Altsmoke