Third batch order Updates
- Thread starter forcedfuel50
- Start date
- th_trl_thread_readers 0
- Status
Where i am sitting today (tuesday) I am confident that some third batch orders will be finished up by the end of the week or over the weekend and will start shipping on Monday.
David
David
Here's a quick status update, which is subject to change:
Batch 3 Pending orders for this coming week: One 3rd batch T1 order shipped last week and for sure one more T1 order will ship this week, maybe two T1's. Also, my goal is to ship out 4-5 Super-Six Orders this week, as most all people wanted their pending orders switched from the T1 to the Super-Six.
Mini-T: I have to order a different size reamer and adjust the dimensions slightly as, with protected 10440's becoming more readily available (deal extreme now has them too), i'm going to make it so it runs protected 10440's which are slightly longer and slightly thicker then non protected ones. I'll keep you posted when i have completed the necessary design changes. The increase in diameter will not be perceptible to the eye.
ST2: Theres been a lot of talk of lists
, but this is the only unit for which i have an "official" waiting list (excluding prepaid pending orders), however i am not accepting any pre-payments on this special ST2 price offering. I posted that my goal was to bring the price in around 50.00 and after going over material costs and my estimated production time per unit, I have finalized on a price of 59.99, which is 9.99 more then 50.00, but by far still the best deal in mod's hands down. s
My plan is to make them in batches of approx. ten at a time and keep filling the orders until the list is exhausted. These are much quicker to manufacture then the Super-Six or Super-T1, but it's still going to take some time, but at that cheap of price, you'll have to be patient as the wait is worth it.
Super-Six-
I'm going to do a small pre-order on these. I'm not a fan of pre-orders after the last wait everyone has endured, but i figure this will be fairly popular and i want to give people an actual opportunity to get one reserved. My machining processes are improving and i'm confident that these will go a bit faster as I also no longer have to make a sleeve for them.
I truly appreciate the patience everyone has shown me. It has not gone unnotice or unappreciated. Keep in mind, i'm a one man show and these truly are handcrafted one by one with extreme attention to detail. You are not getting a mass produced vanilla mod with any Super T product.
David
Batch 3 Pending orders for this coming week: One 3rd batch T1 order shipped last week and for sure one more T1 order will ship this week, maybe two T1's. Also, my goal is to ship out 4-5 Super-Six Orders this week, as most all people wanted their pending orders switched from the T1 to the Super-Six.
Mini-T: I have to order a different size reamer and adjust the dimensions slightly as, with protected 10440's becoming more readily available (deal extreme now has them too), i'm going to make it so it runs protected 10440's which are slightly longer and slightly thicker then non protected ones. I'll keep you posted when i have completed the necessary design changes. The increase in diameter will not be perceptible to the eye.
ST2: Theres been a lot of talk of lists
, but this is the only unit for which i have an "official" waiting list (excluding prepaid pending orders), however i am not accepting any pre-payments on this special ST2 price offering. I posted that my goal was to bring the price in around 50.00 and after going over material costs and my estimated production time per unit, I have finalized on a price of 59.99, which is 9.99 more then 50.00, but by far still the best deal in mod's hands down. sMy plan is to make them in batches of approx. ten at a time and keep filling the orders until the list is exhausted. These are much quicker to manufacture then the Super-Six or Super-T1, but it's still going to take some time, but at that cheap of price, you'll have to be patient as the wait is worth it.
Super-Six-
I'm going to do a small pre-order on these. I'm not a fan of pre-orders after the last wait everyone has endured, but i figure this will be fairly popular and i want to give people an actual opportunity to get one reserved. My machining processes are improving and i'm confident that these will go a bit faster as I also no longer have to make a sleeve for them.
I truly appreciate the patience everyone has shown me. It has not gone unnotice or unappreciated. Keep in mind, i'm a one man show and these truly are handcrafted one by one with extreme attention to detail. You are not getting a mass produced vanilla mod with any Super T product.
David
I agree with nubee. This game is definitely worth the candle. I'm eagerly, bot not impatiently, awaiting the news that the units are ready.
Third batch orders #0, 3, 5, 10 shipped. I have 6 more Super Sixes that I have the bodies bored, threaded, tapered and fishmouthed on. Just have the adapters and final turning left to do on them so those will be shipping very shortly too.
If you are wondering why they don't always ship in order, which for the most part i try to ship them in order, sometimes i'll have an adapter already made up for a unit that isn't required on another earlier order, so i will ship that one out or as was the case in one of the orders above, i already had a T1 unit finished that filled the order so it was shipped.
And i should mention, there are 18 orders on the third batch, so this will make ten of them done here very shortly. Only eight to go after that which means third batch should be wrapped up pretty quickly here.
David
If you are wondering why they don't always ship in order, which for the most part i try to ship them in order, sometimes i'll have an adapter already made up for a unit that isn't required on another earlier order, so i will ship that one out or as was the case in one of the orders above, i already had a T1 unit finished that filled the order so it was shipped.
And i should mention, there are 18 orders on the third batch, so this will make ten of them done here very shortly. Only eight to go after that which means third batch should be wrapped up pretty quickly here.
David
Last edited:
I am walking on clouds. sooooooooooooooooo happy
Seventh heaven is almost here !
I wish you the same very soon
Hey Richie
I don't know who #0, 3 or 10 are but maybe we can intercept their mail.
Just a thought
I don't know who #0, 3 or 10 are but maybe we can intercept their mail.
Just a thought
I'm getting an 801 super-six. If I want to try the 501 do I just need an adapter? Which would you recommend, and really, what's the difference? I like the idea of a shorter atty, but don't want to give up more vapor and a less hot atty.
The 801 is really great for 6v esp. the BE112 version of the 801. You could always get an adapter too to try 510 out too.
David
Is it true the 801 is better for higher voltage and the 510 for 3.7V? Yea, maybe I'll get an adapter. I hate to add length to a short atty.
It's all up to user preference. Generally most people fall along those lines though.
Personally, I find them both equally nice at 6v. The 510 is great with tobacco flavors and the 801 seems better with more exotic flavors. Again, just my opinion.
801 does pretty much suck at 3.7v though. Vapor is literally almost cold. Maybe I'll change my mind when I get my BE112s in.
I like the 510 at 3.7 or 5 (closer to 4.8). At 6v I think it's way too harsh. Funny how just a little more makes a huge difference.
801 at 3.7 is very cool, not so much vapor. Great at 5v, good at 6v.
801 at 3.7 is very cool, not so much vapor. Great at 5v, good at 6v.
I'm not at my computer right now, Bob. I'm in the Bronx searching out mailboxes for some guy with a last name of Truelove. So far... not so good.
Truelove? What a name. Must be an ex-porn star.
- Status
Similar threads
