Tip Please - how fill an E2 v4 ceramic Carotmizer without a syringe...

[blindsoup]

i do not have a syringe.....i do have the adapter that came with them....has anyone had success filling them without using a syringe? cheers..

 

[otrpu]

By "the adapter" I'm assuming you mean the little blue syringe filler nozzle. I've heard some say they put it in one of the holes and drip into it and fill that way. Personally, I use a syringe. . .gotta be a whole lot faster. JMHO

Cheers,
otrpu

 

[blindsoup]

yes, the filler nozzle...i have been trying everything i have around the house the last few days......immediately after i posted this, it hit me - i attached the nozzle to a pippet - filled it right away....cant believe i didnt try that before some of the absolute ridiculous things i have used...

 

[Weekend_warrior1999]

I've read in other forums that some users are pulling the third ring "Filling Ring" out and then dripping it in until full, then carefully putting all three ring back in place.... I've pulled the filler ring out a couple times to clean them, it can be a little hard sometimes to get the ring back in place correctly so it doesn't leak as it has notches in the side of the ring to allow the wick to go through it and over top the ceramic cup. I good q-tip helps greatly in pushing this ring down and seat it....

 

[wood]

the original carts from my lr 306 the part u replace with a drip tip , it seats it perfectly fits perfectly in a e2

 

[Rocketman]

Unsharpened #2 pencil. Pushes with a flat surface.

 

[JuniorNA]

I take out all layers of silicone, including the last layer that has the 2 holes...once that is exposed, you just need to carefully drip on in the outer ring (not the inner or it will drip right through the the floor or desk) and you bypass all the needle jobs, and other types of fill methods. After i put in 20 drops, I pop a drip tip on, and leave all the silicone out, and It draws and vapes nicely.