I've seen everyone using as low as 22g-26g for cloud chasing, but my order of new kanthal hasn't arrived yet, so I'm trying to see what my best bet is for 27/28g. My target ohms is 0.3-0.4. Currently I'm using a K100, on a IGO-W drilled out to 1/16. My 4Nine, trident, and quasar should arrive later today. Hoping to get better results than my current setup, which is a dual micro coil, 8 wraps, hitting about 0.5ohms. The vapor production was alright for using 50/50 juice and I think my wicking is terrible haha, and I had a hotspot on one of the coils. So pretty much I would like to know which RDA would be better for cloud chasing out of my IGO-W, Quasar, and Trident, using 28g Kanthal. I only use a 2mm driver to wrap my coils, not sure if I should use 1.5mm instead, since it's so hard for me to wick it at 2mm already.(I always have to use some force to pull the cotton through the coil). And would using 90/10 juice help alot with vapor production?
Sorry for the long paragraph, hope to hear some great responses, thanks!
-Edit, I also have 18650 MNKE 1500mah, eFest 2500 35A, eFest IMR 2000mah batts.
Sorry for the long paragraph, hope to hear some great responses, thanks!
-Edit, I also have 18650 MNKE 1500mah, eFest 2500 35A, eFest IMR 2000mah batts.
