Titanium Simplicity 18350

Status
Not open for further replies.

undeadpine

Full Member
Mar 8, 2012
31
35
ohio
It can't get here fast enough :) . I have a love hate relationship with my provari. I'm a lineman, I work in all weather and everything I own takes abuse. The provari (first one) shorted internally, they repaired it and it worked fine for a while, but a 4 foot fall broke the glue that held the circuit board to the body and now it acts like it's "special" and only works when when it wants too. Lol. I I love it in the beginning but nothing works as well as a mech mod when it comes to living the life of hard knocks. Don't worry, my Ti is going to live a more protected life. Lol.
 

Cucco

Vaping Master
ECF Veteran
Apr 9, 2013
3,817
12,462
Bonita Springs, Florida, USA
It can't get here fast enough :) . I have a love hate relationship with my provari. I'm a lineman, I work in all weather and everything I own takes abuse. The provari (first one) shorted internally, they repaired it and it worked fine for a while, but a 4 foot fall broke the glue that held the circuit board to the body and now it acts like it's "special" and only works when when it wants too. Lol. I I love it in the beginning but nothing works as well as a mech mod when it comes to living the life of hard knocks. Don't worry, my Ti is going to live a more protected life. Lol.

You need an ELA. :)
 

snork

Vaping Master
ECF Veteran
Verified Member
May 30, 2011
6,181
11,235
CO
It can't get here fast enough :) . I have a love hate relationship with my provari. I'm a lineman, I work in all weather and everything I own takes abuse. The provari (first one) shorted internally, they repaired it and it worked fine for a while, but a 4 foot fall broke the glue that held the circuit board to the body and now it acts like it's "special" and only works when when it wants too. Lol. I I love it in the beginning but nothing works as well as a mech mod when it comes to living the life of hard knocks. Don't worry, my Ti is going to live a more protected life. Lol.

Whew! When read through the first part I was gritting my teeth at the prospect of the Ti falling two stories onto asphalt. Not that it couldn't take it. But yeah, you need an ELA.
 

undeadpine

Full Member
Mar 8, 2012
31
35
ohio
Tempt me with something I can't have... I suppose next comes the broken heart when I find out that, much like the shockwave, the new unicorn is the ELA. What's Next your going to tell me I need a hellfire mini to top off my list. Lol. I have discovered that heartbreak is the norm in this business. The idea of any of my gadgets falling two stories to there demise is disturbing to me.

P.S. If you have a hellfire mini and wanna new best friend PM me
 
Last edited:

rojo

Ultra Member
ECF Veteran
Verified Member
Jul 8, 2011
1,162
2,261
Johnson City, TN
You had asked earlier which batteries will work best in your Simplicity Ti 18500. David generally makes his mods the perfect size for button top AW IMR batteries. So my guess is the AW IMR 18490 is the way to go. I've not owned a steel Simplicity 18500, so I'm basing my prediction on my P+ 18500. You'll probably be able to run an Efest 18500 or similar by removing an O-ring from the bottom shelf inside the tube (or replacing a thick one with a thin one or similar). David will probably include spare O-rings to allow reconfiguration as needed -- at least he did with my P+. That's my guess, anyway. I'm sure the AW 18490s will be a safe bet, in any case, and they have excellent performance.
 
Last edited:

Cucco

Vaping Master
ECF Veteran
Apr 9, 2013
3,817
12,462
Bonita Springs, Florida, USA
You had asked earlier which batteries will work best in your Simplicity Ti 18500. David generally makes his mods the perfect size for button top AW IMR batteries. So my guess is the AW IMR 18490 is the way to go. I've not owned a steel Simplicity 18500, so I'm basing my prediction on my P+ 18500. You'll probably be able to run an Efest 18500 or similar by removing an O-ring from the bottom shelf inside the tube (or replacing a thick one with a thin one or similar). David will probably include spare O-rings to allow reconfiguration as needed -- at least he did with my P+. That's my guess, anyway. I'm sure the AW 18490s will be a safe bet, in any case, and they have excellent performance.

Everything, but the 650 Ti. I was surprised. Sent my 'stroke brain' into a temporary state of confusion. :) I had to add the washers. No big deal, but my hands were bad that week. :)
 

Riverboat

Vaping Master
ECF Veteran
Verified Member
Feb 15, 2012
4,014
3,111
Arizona
As I love the idea of owning an ELA and will, I am sweating this. Sent an email to David wanting to possibly swap the ELA order and pay the difference. I love smooth clean lines and am a sucker for quality machine work. This I would love along with a Ti 350. I need help :facepalm:
Don't do it, get the ELA. It's the true unicorn!

Listen to Nach........ELA is the true star of the SuperT lineup:vapor:
 

Riverboat

Vaping Master
ECF Veteran
Verified Member
Feb 15, 2012
4,014
3,111
Arizona
It can't get here fast enough :) . I have a love hate relationship with my provari. I'm a lineman, I work in all weather and everything I own takes abuse. The provari (first one) shorted internally, they repaired it and it worked fine for a while, but a 4 foot fall broke the glue that held the circuit board to the body and now it acts like it's "special" and only works when when it wants too. Lol. I I love it in the beginning but nothing works as well as a mech mod when it comes to living the life of hard knocks. Don't worry, my Ti is going to live a more protected life. Lol.

I was always a big fan of the Provari....but by no means is it in the same league as an ELA...Its not only the superior build quality the ELA possess........but its the way the ELA vapes..........I don't know if the Kicked/ELA hits harder or if its the ELA's air draw that makes the vapor denser/thicker...but there is a big difference between the two....:vapor:
 

Riverboat

Vaping Master
ECF Veteran
Verified Member
Feb 15, 2012
4,014
3,111
Arizona
Product: Precise Simplicity (18500) - Titanium (Flower)
Out of stock


Compared to recent resoluteness this has been a walk in the park for me.
But if spare *polished* Ti 18500 tubes come around, get on it for me!

I am glad you made it without giving in.....Now lets get those 18500 Ti tubes up on the SuperT site.....:w00t:
 
Status
Not open for further replies.

Users who are viewing this thread