tobh rebuildable and smok mini dripper

[bsdmoose]

I have a question about the tobh atomizer and smok mini dripper.Just picked up the tobh and planned to use it on my bolt.What gauge of wire and how many wraps to get .8 or .9 ohms?On my mini dripper i will use it on my ego winder.What gauge of wire and how many wraps to get 1.2 ohms?Thanks

 

[cloudsfordaze]

single or dual coil? you need to give us more info

 

[Izan]

I have a question about the tobh atomizer and smok mini dripper.Just picked up the tobh and planned to use it on my bolt.What gauge of wire and how many wraps to get .8 or .9 ohms?On my mini dripper i will use it on my ego winder.What gauge of wire and how many wraps to get 1.2 ohms?Thanks

Let the fun begin: Coil wrapping | Steam Engine | free vaping calculators

good luck
I

 

[bsdmoose]

duel for tobh.single for mini dripper.Thanks

 

[minimalsaint]

First rebuildable?
Do your homework. Get the correct equipment. Test your builds. If you plan on sub-ohming there is much more to know than just "how many wraps".
What sort of batteries do you plan on running?
No worries- someone should be along shortly that can probably answer your questions.

 

[VapingTurtle]

Yo, Moose, first read Baditude's blogs, especially the ones about batteries.

Then check out this section of ECF, and read the basics threads first.

 

[AzPlumber]

Most Ego type batteries have a 1.5 ohm limit and that's pushing that battery pretty hard. I personally wouldn't go any lower than 2.0 ohms on one.

 

[VapingTurtle]

Most Ego type batteries have a 1.5 ohm limit and that's pushing that battery pretty hard. I personally wouldn't go any lower than 2.0 ohms on one.

And a Bolt is built with thin wires. It is not made for low resistance either.

 

[AzPlumber]

And a Bolt is built with thin wires. It is not made for low resistance either.

Good catch, lots of Bolt clones now. You would have to check the spec (if available) on which one you have.

 

[classwife]

Moved to Rebuildable Atomizer Systems from APV Discussion