Topper for 14500 Mod

[eMats]

Does anyone know of a good topper for a 14500 mod that's non-Genesis type? I want to be able to transport it in my pocket and Genesis atomizers tend to leak. Suggestion please. Thanks.

Edit: Needs to be tank type too. I have nice drippers for them already.

 

[Baditude]

Clearomizers or cartotanks with low resistance coils.



AltSmoke BB 14500 mechanical mod with clearomizer and cartotanks.

I suggest Vivi Nova or iClear 30 (clearo) or a 19mm diameter cartotank (IBTanked.com)

 

[eMats]

I need a carto to be at most 1.5 ohms. I know they make them but where to find and what are the good ones? My mods are 17mm. IBTanked has a 15mm tank but again I find that 1.5 ohms is still on the high side for my taste on a mech.

 

[eMats]

I wish Kanger would come out with a Mini Protank 2 with a 510 connection. I'd get that in a heartbeat.

 

[Baditude]

I wish Kanger would come out with a Mini Protank 2 with a 510 connection. I'd get that in a heartbeat.

The regular Protank is 510 connected and is the right size diameter-wise for my BB.

 

[CloudZ]

What about just a regular PT2? Would that be at least close to flush? I read they are 18.5 mm.

 

[eMats]

What about just a regular PT2? Would that be at least close to flush? I read they are 18.5 mm.

It has to be perfectly flush or smaller. LOL thanks though

 

[CloudZ]

It has to be perfectly flush or smaller. LOL thanks though

What is the diameter of your mod? Numbers help.

 

[eMats]

No mini vivi either. No Aspire clones either - vape sucks, have it. LOL... picky.

 

[glasseye]

SmokTek.com has cartos as low as 1.25Ω. I buy the single coil 1.7s for my son there, I think he got 2 bad ones out of maybe 30. Can't speak for the 1.25s...they don't look pre-punched.

 

[eMats]

What is the diameter of your mod? Numbers help.

17mm I believe.

 

[eMats]

SmokTek.com has cartos as low as 1.25Ω. I buy the single coil 1.7s for my son there, I think he got 2 bad ones out of maybe 30. Can't speak for the 1.25s...they don't look pre-punched.

Ok now! I'll look into that one pronto!

 

[eMats]

This looks good. UDCT V2

 

[sneakerpimp]

Does anyone know of a good topper for a 14500 mod that's non-Genesis type? I want to be able to transport it in my pocket and Genesis atomizers tend to leak. Suggestion please. Thanks.

Edit: Needs to be tank type too. I have nice drippers for them already.

which drippers do you have?

 

[Zealous]

I didn't see what your price range is but kayfun mini is nice on a 16mm 14500. that's my current set up & it's nice.

 

[eMats]

which drippers do you have?

I use the one that came with the Novice clone. I have another on order from FT, $7.58 V6 RDA Rebuildable Dripping Atomizer - adjustable airflow hole at FastTech - Worldwide Free Shipping

and this

http://www.fasttech.com/products/1391301

 

[eMats]

I didn't see what your price range is but kayfun mini is nice on a 16mm 14500. that's my current set up & it's nice.

I was thinking of the Kayfun mini but I haven't seen any good pictures of it on a 14500 mod. Do you have a pic?

 

[sneakerpimp]

I use the one that came with the Novice clone. I have another on order from FT, $7.58 V6 RDA Rebuildable Dripping Atomizer - adjustable airflow hole at FastTech - Worldwide Free Shipping

and this

$5.18 Phoenix FH20 Detachable Dripping Atomizer (1.5ml) - 2.4

thanks. i use a Smok Octopus but i have yet to find any other topper to flush fit my Bagua 14500 Mini clone that isn’t high end (GP, Penelope, Kayfun, etc)… i would trade my right arm for a 17mm IBTanked.

 

[eMats]

thanks. i use a Smok Octopus but i have yet to find any other topper to flush fit my Bagua 14500 Mini clone that isn’t high end (GP, Penelope, Kayfun, etc)… i would trade my right arm for a 17mm IBTanked.

Not sure about the Bagua, I measured it at about 16.75 or 16.5mm so watch for that. Might be flush though, not sure how accurate FT measurements are. 15 mm IBTanked would look sharp on the Bagua but which carto will you use. 1.5 maybe but I like to vape my 14500 at about 1.1 - 1.2 ohm.

 

[sneakerpimp]

Not sure about the Bagua, I measured it at about 16.75 or 16.5mm so watch for that. Might be flush though, not sure how accurate FT measurements are. 15 mm IBTanked would look sharp on the Bagua but which carto will you use. 1.5 maybe but I like to vape my 14500 at about 1.1 - 1.2 ohm.

i haven't measured my Bagua but i'm guessing IBTanked would come out with a 17mm when their current lineup is 15-19-22-25.

i read somewhere the lowest safe ohms on a 14500 is 1.2 ...i'm not the coil building savant just yet so i've been using pre-made coils at 1.6~1.7 ohms and they've been satisfactory.