UD Bellus
- Thread starter cloudysheep
- Start date
- th_trl_thread_readers 0
- Status
always leak a lil after refilling, kinda irritating.. and the built deck's really small, can't fit anything more than 2.5mm
other than those mentioned, vapor pro. has wat a dual-coil rta should, flavor wise stm's still edges out.. nice sketch btw
other than those mentioned, vapor pro. has wat a dual-coil rta should, flavor wise stm's still edges out.. nice sketch btw
Ok, this is by no means a concise tut... Just how I do it and get no leaking even when it's in my bag... =)
1) New coil! Zaas!
2) Position your coil height so that you can see the whole thing with the chamber cap on
3) Cut your wick about the same size as your coil's ID
4) Trim your wick just so it rests on the top lip of the juice channel
5) Install your tank assy ensuring the AFC is at shut position and your top cap is firmly shut
6) Install the build deck firmly into the base before screwing on the locking ring
7) Keep her vertical and fill her up! (Not to the brim)
8) Shut the top cap firmly back on
9) with the cap and afc closed, turn it upside down and open the airflow and leave it for abit " credits to Vapen00b for this tip
10) Voilà! Happy ending![emoji4]
1) New coil! Zaas!
2) Position your coil height so that you can see the whole thing with the chamber cap on
3) Cut your wick about the same size as your coil's ID
4) Trim your wick just so it rests on the top lip of the juice channel
5) Install your tank assy ensuring the AFC is at shut position and your top cap is firmly shut
6) Install the build deck firmly into the base before screwing on the locking ring
7) Keep her vertical and fill her up! (Not to the brim)
8) Shut the top cap firmly back on
9) with the cap and afc closed, turn it upside down and open the airflow and leave it for abit " credits to Vapen00b for this tip
10) Voilà! Happy ending![emoji4]
Last edited by a moderator:
I use 2 setups for different juices:
D2 + Goliath 2 + The Milkman
EVic VTC Mini + Bellus + Jazzy Boba
Both on Ti coils 0.07ohm
D2 + Goliath 2 + The Milkman
EVic VTC Mini + Bellus + Jazzy Boba
Both on Ti coils 0.07ohm
Haha I do the same hahahaha easy ah just switch tanks.... And also some flavours seem to taste nicer with certain tanks
4) Trim your wick just so it rests on the top lip of the juice channel
Ok resolved the leaking issue. Thanks for the tut! I did a little different tho. I extend the wick longer until the bottom of the juice wells.
None. With cotton enough for 3mm coils, the juice still flow well. It may have something to do with how I trim the ends of the wicks. As long as the parts that go into the wells aren't too packed.
Anyone have the black version?
I just ordered it today, very excited to try this one out. I ordered a bunch of juice too, what pg/vg ratio do think would be the best balance to avoid leaking and dry hits?
I just ordered it today, very excited to try this one out. I ordered a bunch of juice too, what pg/vg ratio do think would be the best balance to avoid leaking and dry hits?
Mother farmer!!! This thing is the t*ts!! I've been reborn as a virgin orc! Mother farmer!....
Bloody hell this thing is damn good!!!
Airflow needs a bit of getting used to but bloody hell...... [emoji15]
The CTR post I saw a video on YouTube... You got to tighten it extra hard during the first assembling... Then the rest if the parts just hand tighten is ok liao...
tats sleek! may i ask how's the price compared to bellus? which one more ex?
Mother farmer!!! This thing is the t*ts!! I've been reborn as a virgin orc! Mother farmer!....
Bloody hell this thing is damn good!!!
Airflow needs a bit of getting used to but bloody hell......
- Status
Similar threads
- Locked
