upgrade from mvp 2.0 to ....?????

[crazyfingers123]

Hey all,
I am currently using an mvp 2.0 with aspire nautilus. I am very happy with it but I'm looking to get into dripping and cloud chasing. I'd really like to get something with a digital readout. I am new to dripping and have never have built coils but I'm intrigued and really want to start. My budget is about $60-$80. I'm hoping to get a full setup for that (mod, battery, rda, etc) and whatever else I'll need. Any advice is appreciated! Thanks!

 

[LuNar]

There's a mpv 3.0. goes up to 30 watts and fires down to 0.5 ohms I believe. I think it cost like $70 though. I have an ipv mini and It also fires up to 30 watts and down to 0.5 ohms I love this thing. I got it from elev8ape. I think there is a coupon you can use "Feb15" I believe it make the price about $46, it takes an 18650 battery though.

There is a thread somewhere around these forums: " itty bitty mods under $100" You should go check it out.

As for cloud chasing It can be difficult to find a rda and a regulated mod with a digital screen at about $80. I'd suggest the kanger subtank though because it comes with a rba section I believe and from what I hear the tank is crazy good, price is about $50 I think.

My current set up is ipv mini 30 watt and a Lemo drop. I have 2 Lghe2s 18650's 2500mah 20amps continuous 35 amp pulse, Great batteries. With some 26 gauge kanthal I got from temico industrial power, built a micro coil 12 warps, came out to about 1.6 ohms, I vape it at about 20 watts and it's a great vape. Tons of flavor and a good amount of vapor, I friggin love it.

I don't really know too much about rda's. I got tugboat clone off a friend, with a dual coil build 26g kanthal 0.5 ohms at 30 watts it's decent. I'm just not a huge fan of having to drip all the time. I hear the AIREK is pretty good and versatile. Might want to look into that.

I hope I helped lol.

 

[philoshop]

Welcome to the forum crazyfingers! I think you will have to double your budget to get what seem to be asking for.
You could pick up an RDA like a Magma clone, some wick and wire, and some basic coil building tools for about half of your budget. Build some 1.5 ohm single coil setups and run the Magma on your MVP to get some experience with building and wicking while you save up for the rest. I run a Magma on my MVP2 all the time like that with decent success.

 

[v1k1ng1001]

I just picked up a sigelei 50w v2 for $59 shipped at cloudscape. It's possible to get the sigelei 100w plus for $75. These boxes are getting excellent reviews.

You'll still need to buy batteries. I'd suggest shopping ebay for RDAs--you can find good EHpro clones for under $20.

So yeah, you're going to have to push your budget up a bit.

 

[Alex Spear]

I would personally save up for a little bit longer and get the segelei 100 watt and a doje v2 clone or authentic. Right now i have the segelei 150 watt and i never go past 75 watts and blow

 

[turbotoast]

The IPV4 is coming out soon and is 100w

 

[Dayze0]

Ive got the MVP 3.0 -its great, 30W is high enough for me - probably to much , just depends on how much you intend to 'tinker' with your setup

 

[Msand]

There's a mpv 3.0. goes up to 30 watts and fires down to 0.5 ohms I believe. I think it cost like $70 though. I have an ipv mini and It also fires up to 30 watts and down to 0.5 ohms I love this thing. I got it from elev8ape. I think there is a coupon you can use "Feb15" I believe it make the price about $46, it takes an 18650 battery though.

There is a thread somewhere around these forums: " itty bitty mods under $100" You should go check it out.

As for cloud chasing It can be difficult to find a rda and a regulated mod with a digital screen at about $80. I'd suggest the kanger subtank though because it comes with a rba section I believe and from what I hear the tank is crazy good, price is about $50 I think.

My current set up is ipv mini 30 watt and a Lemo drop. I have 2 Lghe2s 18650's 2500mah 20amps continuous 35 amp pulse, Great batteries. With some 26 gauge kanthal I got from temico industrial power, built a micro coil 12 warps, came out to about 1.6 ohms, I vape it at about 20 watts and it's a great vape. Tons of flavor and a good amount of vapor, I friggin love it.

I don't really know too much about rda's. I got tugboat clone off a friend, with a dual coil build 26g kanthal 0.5 ohms at 30 watts it's decent. I'm just not a huge fan of having to drip all the time. I hear the AIREK is pretty good and versatile. Might want to look into that.

I hope I helped lol.

http://www.e-cigarette-forum.com/fo...40761-little-itty-bitty-mods-under-100-a.html

 

[wheelie]

A 50 watt unit or above and a Kanger Subtank would be my choice. I have a Sigelei 100 Plus and a Kanger Subtank and it blows gr8 clouds.