Vape tools

Status
Not open for further replies.

VaPreis

Ultra Member
ECF Veteran
Verified Member
Oct 5, 2013
2,043
2,273
St. Louis, MO
Only 1 other person has mentioned the round toothpicks. So far, they are the best thing I've found for tucking in the wicks.

I use a little eye glass screwdriver I found laying around the house. It's just about toothpick size. ;)

The list of tools I use _everytime_ I recoil one of my rta's:

-butane micro torch for annealing wire before wrapping
-piece of coat hanger. It is 2.2mm and my preferred coil size for the kayfun/Taifun GT/Expromizer/Lemo
-small finger nail clipper for clipping coil leads
-small multi-screwdriver that I bought at Walmart for 89 cents for deck screws
-2 pairs of scissors. One for clipping kanthal off the reel, a smaller sharper pair for clipping cotton wick tails to size.
-The aforementioned eyeglass screwdriver for tucking wick tails
-510 Ohm reader
-tweezers

I have a whole bag of the other stuff, but I could vape quite happily for the rest of my life with only those tools.
 

Harleybarbie

Ultra Member
ECF Veteran
Verified Member
Nov 7, 2009
1,558
3,557
Wonderland
My list, I'm traveling at the end of this week.

Magnifying glass
Suture scissors
Curved Hemostat
Screwdrivers X2
Drill bit box easy to carry I use 2 bits for dual coils
Small wire cutters
Small pliers
26 Kanthal wire
28 Kanthal wire
Ohm meter
Japanese Cotton
Reading glasses
Mini Butane torch - haven't used it in a while
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread