Vapefly Brunhilde SBS 100W Mod Review By Frenkyou

[Frenkyou]

Vapefly Brunhilde SBS 100W mod introduction:
Today I am happy to tell you about the Vapefly mod Brunhilde SBS 100W which was sent to me for the purpose of this review by @sourcemore which I thank.
Vapefly with the collaboration of the German community enters the SBS market with a mod made using the 5-axis CNC carving process.
Brunhilde SBS features some beautiful laser engravings and gives a great eye-catcher with its Old-Style Germanic look, can accommodate atomizers up to 26mm in diameter and accepts a 21700, 20700 or 18650 battery with adapter. Its chipset communicates with an OLED screen placed under the base and is equipped with Variable Wattage, TC and Bypass modes.
Enjoy the reading

Vapefly Brunhilde SBS 100W Mod; Packaging:
The beautiful package comes in the colors of an ancient parchment, on the front of the sleeve there are some technical indications that appear as faded by time, hardly visible and in full "aged paper" style. The name "Brunhilde" appears in Gothic style characters. They are also present; logo and name of the Brand (Vapefly), sticker showing the color of this sample (Gunmetal) and the words "Brunilde SBS 100W Side By Side with the German Community".

On the back side of the sleeve and under the heading "Brunhilde SBS 100W" appear; the packing list, a short list of main features, various social icons, brand addresses and contacts, warnings, scratc & check, barcode, logos / brands.
"Brunhilde SBS 100W" is also shown on one side of the box with a mix of Gothic and conventional writing.

Vapefly Brunhilde SBS 100W Mod; Packing List:
• 1 * Brunhilde SBS 100W Mod
• 1 * Type-C cable
• 1 * 18650 Battery Adapter
• 2 * Sponge-ring
• 1 * User Manual
• 1 * Warranty Card
• 1 * Warning Card

Vapefly Brunhilde SBS 100W Mod; Measurements and characteristics:
• Size: 52.4 * 27 * 82.8mm
• Weight: 143g
• Power range: 5-100W
• Battery type: single 21700/20700/18650
• Supported resistances: 0.08-3.5Ω
• Screen: 0.91 inch OLED
• Output voltage: 0.5-8V
• Output mode: VW / Bypass / TC (SS316L, Ti, Ni200)
• TC temperature range: 100-315C / 200-600 F
• Charging: type C, 5V / 2A

Vapefly Brunhilde SBS 100W Mod; Available colours:
• Black, Gunmetal, Silver, Blue, Rose Gold, Red, Pink.

Vapefly Brunhilde SBS 100W Mod; First impressions:
The beautiful laser-engraved decorations on the aeronautical aluminum body of this Mod SBS bring back to Brunhilde the Queen of Iceland who in Germanic mythology was relegated by Odin to sleep perpetually enveloped in flames on a high cliff surrounded by helmet and armor. Only a fearless hero can awaken and free the queen from the spell.

After briefly telling you about the introduction of this "fairytale" I like to notice the balance of shapes without sharp edges of this Vapefly project. This is a very compact SBS Mod (if you take into account) that can accommodate a large 21700 battery, also the weight contrary to what you might think is contained in only 143g without battery. The materials of which the Mod is made are CNC machined and the aluminum body is well blended with the steel battery tube which recalls in the decorations the shapes of an ancient tower of the medieval period. All this translates into a Hi-end looking device, elegant, robust and rather ergonomic.

Vapefly Brunhilde SBS 100W Mod; Side view:
Reasoning with imagination, the laser-etched "wings" on the sides of the Mod should represent those on the queen's helmet. Under the "wings" on one side appears the writing Brunhilde while on the other side there are the adjustment buttons "+ and -" which are quite protruding, round in shape and free from anomalous movements.
The frame with the gently curved upward connection is aesthetically successful.

Vapefly Brunhilde SBS 100W Mod; Front/back view:
On the front we find engraved the design of the helmet of Queen Brunhild which incorporates the Fire key. The key conveys a good feeling and is slightly protruding, made in the same color as the frame is also pleasantly "camouflaged".
Below the representation of Brunhilde's helmet is the USB-C charging socket to be used (as I always recommend) only in an emergency, this port supports a charging speed of 2A and pass-through.

The profile of the rounded handle is well connected in the upper part with the steel tube-battery, the shape of the "handle" and the CNC machining of the tube transmit overall a good feeling with the hand.

 

[Frenkyou]

Vapefly Brunhilde SBS 100W Mod; Bottom/top view:
On the bottom, inside a stainless steel plate screwed to the Mod using 4 French screws, there is the 0.91 "Oled screen in a recessed position. As seen on other SBS devices, also on Brunhilde the display has been positioned on the bottom of the Mod mainly to contain the dimensions and to leave free field to the beautiful side and front decorations present on the body of the Vapefly device.

On the monochrome display there are luminous and clearly legible characters, the following data are present and can be consulted; battery status indicator, coil value, watt, volt, temperature (TC when set) or Bypass mode.

It is therefore an "essential" chipset that does not show some non-vital parameters such as; length of the last puff, puff counter and percentage of residual charge of the accumulator. Just to give free rein to unfortunate battery problems, 6 vent holes are obtained on the bottom of the mod.

The stainless steel cup is anchored to the mod via 4 torx screws and contains a gold / plated floating pin, the cup can accommodate atomizers up to 26mm in diameter without interfering with the battery holder tube.

I find the battery-holder tube (made of stainless steel) very aesthetically appealing and right; do you remember the fable of the queen relegated by Odin to sleep engulfed in flames on a tower (or cliff depending on the interpretations)? Well the cap recalls with its engravings the "blackbirds" of a tower and in the upper part of the cap as well as 3 large vent slots we find the "flames of hell" that in the legend enveloped the princess during her sleep.

Vapefly Brunhilde SBS 100W Mod; Battery choice:
As anticipated (Brunhilde Mod) offers a wide choice of accumulators, in fact it can accommodate a 21700, a 20700 or a "small" 18650 cell through the decorated plastic tube-adapter. As references, the positive pole (+) is marked on the bottom compartment, the positive pole (-) is present on the inside of the cap.

So far so good, very good indeed ... Provided you can overlook a rough thread that can create some squeak or hardening during the removal or insertion of the battery cap. Nothing to worry about, but it is certainly not the best thread so far encountered during my vaping device tests. I have tried all three types of battery and have not found any abnormal movement within the box.

Vapefly Brunhilde SBS 100W Mod; Tank choice:
Previously I told you that Brunhilde can accommodate atomizers with a maximum diameter of 26mm (official data), however I managed to use my Hell Vape Launcher by Wirice which with the convex glass reaches 28mm in diameter and touches the profile of the tube. Of course, below 28mm in diameter you can use any tank with a good aesthetic result such as Innokin's Zenith-2 or small 22mm tanks for MTL, which if they are too low you must logically use a drip-tip long enough not to find the battery-holder tube in your mouth. The difference in height between the 510 cup and the battery cap is quantifiable in 35mm.

Vapefly Brunhilde SBS 100W Mod; Operation Guide:
The wattage is adjusted from 5w to 100w in increments of 0.1W at a time and with single presses of the button, or in quick increments of 1W at a time with a long press of the button.

In TC mode, degrees Celsius can be adjusted in 1 degree increments between 100 and 315 or in 5 degree Fahrenheit increments between 200 and 600 degrees.
The By-pass Mode automatically detects the installed resistance and you don't have to adjust anything! Naturally, the By-pass mode simulates a mechanical behavior and the power curve drops as the battery is discharged.

• Power on-off: 5 clicks on the Fire button.
• Mode Choice: 3 clicks on the Fire button to choose between VW, Bypass, TC (Ni2001Ti \ SS316L).
• When using TC mode, press the "+" or "-" buttons to select the Coil material and press Fire to confirm.
• Screen Rotation: Press the Fire button and the "+" button simultaneously for 1 sec.
• Adjustment lock / unlock: Press the "+" and "-" buttons at the same time

Protections:
Brunhilde chipset is called "3S" and incorporates the most important security functions.
• Reverse battery protection,
• Overload protection
• Overheating protection
• Short circuit protection
• Low voltage protection
• Auto-fire protection (10s)

Vapefly Brunhilde SBS 100W Mod; Final remarks:
Brunhilde SBS offers first-rate materials and workmanship, only I didn't like the thread of the battery cap. From an aesthetic point of view, Brunhilde Mod is a simply stunning Device with truly captivating graphics, particularly relevant and evocative of the origins of the traditional Germanic legend that I briefly mentioned during the review. The various engravings and decorations are among the most beautiful I've ever seen on devices in this price range.

With the atomizer of your choice installed the dimensions of Brunhilde Mod SBS are really small and comparable to much smaller traditional kits, also calculating that it is possible to install a large battery 21700 Brunhilde Mod is really interesting for many Vapers, regardless of whether they are MTL or DL vapers.

Regarding the weight, in my opinion, it is necessary to make a reasoning; if we look at Brunhilde from the point of view of a single-battery device, it will certainly be heavy to carry, but not if we compare it to other CNC-machined steel SBS creations. So from this point of view, in my opinion, it can be safely stated that Brunilde SBS is not only ergonomic and compact with its 143g but also light. The presence of the aeronautical aluminum alloy played a fundamental role by reducing the steel parts and maintaining excellent structural solidity.

The VW mode chipset performs flawlessly with good Fire responsiveness and provides good performance with DL atomizers. Adjustments to the tenth of a watt for MTL users are important and Brunhild supports them. The indications of the resistive value to the changing of the tanks always appear quite precise and also the battery management seems to me worthily supported by the "3S" circuit of Vapefly.

Some data is missing on the display such as; the percentage of charge remaining, the number and the Puff counter. The TCR option is missing which frankly (on a device of this price range) you can easily give up rather than having an approximate one and not up to a much more expensive DNA circuit.
Thanks for reading.

You can buy from Sourcemore Vapefly Brunhilde SBS 100W Mod at the price of $ 66.88 (€ 56.70) by entering the code : SBSM
Vapefly Brunhilde SBS 100W Box Mod VW/TC

 

[hittman]

Great review! Very nice looking device. I may have to get one.

 

[Frenkyou]

Thanks Hitt, I really like the Mod and use it often.

 

[hittman]

I just recently became interested in SBS mods and this one looks fantastic.