Vaporesso Revenger or Wismec Predator

[Shoxvibe]

So I've been happily using my smok GX350 for a couple of months now and I'm beginning to realize I could use a more portable mod when I'm on the go. I've had my eye on the Predator since it was released but recently I've started hearing about issues with the mod's 510 connection. This caused me a bit of concern of course and now I have just discovered a possible alternative, the Revenger by vaporesso. I like the side firing-bar on my mods but that's a bit nit picky so I won't mind a normal button if the benefits outweigh it.

Which of these two do you guys think I should get? Or if you have a suggestion for a portable, dual-18650 battery mod that can fit 25 mm (or larger) atomizers, please feel free to share!

 

[Tonee N]

I really like the Revenger. But my latest came today. So far so good.
Ijoy Captain PD270(Combo RDTA on top). Sided by my Alien w/CB. I will probably pick up a Revenger later.

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[Shoxvibe]

I really like the Revenger. But my latest came today. So far so good.
Ijoy Captain PD270(Combo RDTA on top). Sided by my Alien w/CB. I will probably pick up a Revenger later.

Sent from my SAMSUNG-SM-G870A using Tapatalk

I'm liking the look of the PD270! Will definitely check it out

 

[Tonee N]

The USER setting is like the Omni board in the Tarot, you can adjust the wattage curve.

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[Shoxvibe]

The USER setting is like the Omni board in the Tarot, you can adjust the wattage curve.

Sent from my SAMSUNG-SM-G870A using Tapatalk

I never even knew that was a thing! How do atomizers like the TFV8 (or larger) look on it? Not too top-heavy/no overhang I hope?

 

[Tonee N]

Here it is with the TFV8, Perseus, Blazer 200, Freemax Pure, Ijoy 5, Combo RDTA, and Icon RDA

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[Shoxvibe]

Here it is with the TFV8, Perseus, Blazer 200, Freemax Pure, Ijoy 5, Combo RDTA, and Icon RDA

Sent from my SAMSUNG-SM-G870A using Tapatalk

Oh wow it has no problem fitting those on top! The more I see, the more I like lol. I read it's powered by a pair of 20700 batteries but also takes 18650's? What the difference between the two?

 

[Tonee N]

The 20700 are longer. I made sure that they would charge in my Luc 6 charger and the company verified they would.
There is a 2 battery sleeve adapter if you want to use 2-18650's.

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[Shoxvibe]

The 20700 are longer. I made sure that they would charge in my Luc 6 charger and the company verified they would.
There is a 2 battery sleeve adapter if you want to use 2-18650's.

Sent from my SAMSUNG-SM-G870A using Tapatalk

Oh no I don't think my charger supports 20700! [emoji20] this is a bit heartbreaking lol

 

[Tonee N]

Here is a 30mm on it, courtesy of boompumper

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[Tonee N]

Oh no I don't think my charger supports 20700! [emoji20] this is a bit heartbreaking lol

What charger do you have? They work in the Efest Luc 6 and Nitecore d4

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[Tonee N]

Oh no I don't think my charger supports 20700! [emoji20] this is a bit heartbreaking lol

Send them an email. [emoji106]

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[Shoxvibe]

What charger do you have? They work in the Efest Luc 6 and Nitecore d4

Sent from my SAMSUNG-SM-G870A using Tapatalk

I have the XTAR VC4. Can't believe it charges 20+ different types of batteries and 20700 isn't one of them!

 

[Tonee N]

I have the XTAR VC4. Can't believe it charges 20+ different types of batteries and 20700 isn't one of them!

I have the XTAR VC4. Can't believe it charges 20+ different types of batteries and 20700 isn't one of them!

Chargers that fit 20700 batteries
u/Mooch31512d
I've been getting a lot of requests for a list of chargers that fit the new 20700-sized (20mm diameter, 70mm length) batteries that are becoming available.

Here's a list of chargers that fit the Sanyo NCR20700A/B, iJoy, and Ampking 20700 batteries. A couple are a tight squeeze though so you need to keep the wraps in perfect condition (good advice for any battery though).

Basen BS1 (barely fits)

Basen BS-2

Basen BS-4

Efest LUC V4

Efest LUC V6

Efest SODA

E-SYB S6

HohmTech HohmBase

XTAR SV2

Please note:

I have not tried any other chargers.

I do not know if I will be trying any other chargers or when.

I do not know if these chargers will fit any other 20700 or 21700 batteries, but they should.

I cannot guarantee that you will be able to use these chargers with these batteries, only that I was able to.

If you have personally used any other chargers successfully with 20700 batteries please feel free to respond below with the charger name/model number and which battery.

Not just measured the opening or checked the specs but actually tested with a 20700. Others will be basing their purchasing decisions on what we post so we want to be sure.

25 Comments
u/KeyserSOhItsTaken • 12d
Doing the Lord's work.

Praise Mooch!

u/blackg0at • 12d
You're an amazing person, seriously. Thanks for all that you do for the vaping community.

u/Greybush_The_Rotund • 12d
If the XTAR SV2 fits, then so should Bays 1 and 4 of the XTAR VC4.

u/Mooch315 • 12d
Do you have any 20700's you can confirm that with?

u/Greybush_The_Rotund • 12d
Nope, but I have both the SV2 and the VC4, and the 2 outer bays of the VC4 are as wide and deep as the SV2 bays. The 2 inner bays are narrower. The manual does state that it can take 22650, 25500, 18700, and 32650 batteries, so that's a few sizes that are wider or longer than 18650s.

EDIT: Missed the edit about wanting hard confirmation rather than measurements or manual specs. Treat the above as unconfirmed until someone says otherwise.

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[Shoxvibe]

Chargers that fit 20700 batteries
u/Mooch31512d
I've been getting a lot of requests for a list of chargers that fit the new 20700-sized (20mm diameter, 70mm length) batteries that are becoming available.

Here's a list of chargers that fit the Sanyo NCR20700A/B, iJoy, and Ampking 20700 batteries. A couple are a tight squeeze though so you need to keep the wraps in perfect condition (good advice for any battery though).

Basen BS1 (barely fits)

Basen BS-2

Basen BS-4

Efest LUC V4

Efest LUC V6

Efest SODA

E-SYB S6

HohmTech HohmBase

XTAR SV2

Please note:

I have not tried any other chargers.

I do not know if I will be trying any other chargers or when.

I do not know if these chargers will fit any other 20700 or 21700 batteries, but they should.

I cannot guarantee that you will be able to use these chargers with these batteries, only that I was able to.

If you have personally used any other chargers successfully with 20700 batteries please feel free to respond below with the charger name/model number and which battery.

Not just measured the opening or checked the specs but actually tested with a 20700. Others will be basing their purchasing decisions on what we post so we want to be sure.

25 Comments
u/KeyserSOhItsTaken • 12d
Doing the Lord's work.

Praise Mooch!

u/blackg0at • 12d
You're an amazing person, seriously. Thanks for all that you do for the vaping community.

u/Greybush_The_Rotund • 12d
If the XTAR SV2 fits, then so should Bays 1 and 4 of the XTAR VC4.

u/Mooch315 • 12d
Do you have any 20700's you can confirm that with?

u/Greybush_The_Rotund • 12d
Nope, but I have both the SV2 and the VC4, and the 2 outer bays of the VC4 are as wide and deep as the SV2 bays. The 2 inner bays are narrower. The manual does state that it can take 22650, 25500, 18700, and 32650 batteries, so that's a few sizes that are wider or longer than 18650s.

EDIT: Missed the edit about wanting hard confirmation rather than measurements or manual specs. Treat the above as unconfirmed until someone says otherwise.

Sent from my SAMSUNG-SM-G870A using Tapatalk

Oh thank you! So as long as the battery fits in the charger it's okay to do so?

 

[Tonee N]

Oh thank you! So as long as the battery fits in the charger it's okay to do so?

I would double check with xstar just be sure. [emoji106]

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[Shoxvibe]

I would double check with xstar just be sure. [emoji106]

Sent from my SAMSUNG-SM-G870A using Tapatalk

Will do. Thanks so much! [emoji4]

 

[Tonee N]

Will do. Thanks so much! [emoji4]

"One does what one can"- Peter Stormare (Constantine)[emoji106]

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[KenD]

Oh no I don't think my charger supports 20700! [emoji20] this is a bit heartbreaking lol

As long as the 20700 fit the Xtar will charge them just fine. Not sure if they fit though.

Edit: there's a post in the batteries and chargers subforum that claims that the vc4 will fit 20700 cells.

Sent from my K6000 Pro using Tapatalk