VaporMoon & The Saber Touch Official Thread!

[Sir_Lawrence]

Made it back after driving all day... Ready to pass out from this very long week.
Checked emails and have over 300 to answer. I will have to spend tomorrow just writing people back to let them know VaporMoon has not closed, and that they will get their orders.
I promise... A Ton over orders will go out this week.
Thanks for understanding.

 

[tnt56]

Glad your back Sir. Now remember to take care of yourself.

 

[Sir_Lawrence]

Yea... don't want to end up where I was this week! Funerals are not pleasant.

 

[Credo]

Greetings...recently put in an order and look forward to trying out a Saber Kicked.
Just popping in to subscribe to the thread and say HI

 

[Sir_Lawrence]

Greetings...recently put in an order and look forward to trying out a Saber Kicked.
Just popping in to subscribe to the thread and say HI

Welcome to the family!

 

[tnt56]

Greetings...recently put in an order and look forward to trying out a Saber Kicked.
Just popping in to subscribe to the thread and say HI

You do know that pics are mandatory.
Your gonna love your saber.
What color did you get?
And welcome to the Saber family.

 

[Credo]

You do know that pics are mandatory.
Your gonna love your saber.
What color did you get?
And welcome to the Saber family.

I got a super plain one this go around. Base model...brushed aluminum, no threads, stock squared caps and old style button.

I'm hoping to get a no-brainer 'work horse' PV. I opted for 'no finish' with easy sensor operation in mind. Going with the old style button gives a bit of protection around the edges to prevent mis-fires.

I plan to run it with a Kick most of the time (safety of a regulated pv...but easily bypassed when in the mood), but I might occasionally build some atties to go with a 5v NIMH setup (without the kick of course). I've been interested in trying some micro-coils with cotton (for budget reasons) so that might be in my future pretty soon. I understand this mod can handle up to 7amps easily right? I see no reason to mess with sub-ohm 3.7v stuff when I can just pop in a 5v battery or a pair of 350s and up the volts, yet this mod should still be able to handle either. Frankly...so far I find around 7 watts on a rewicked/coiled vivi-nova tank a tough 'daily vape' to beat (especially for the money)...that's probably how my Saber will spend most of it's time setup.

This go around, what drew me to this mod was:
1. The touch feature...something a bit different from my usual Darwin button callous

2. It's long enough for the Kick...but I don't have to mess with rings or moving parts to piddle with different batteries...just drop in spacers I'm not sure exactly why, but I find this more appealing than the mods with a zillion little parts and screwy things for a workhorse mod.

3. IMPORTANT: It's US made in a small business setting ... I like that

Happy Birthday to me (in a few days...maybe my Saber will be here in time to sit in the center of the cake).

 

[Sir_Lawrence]

All good reason for a Saber! Should hire you for PR work!

 

[Sir_Lawrence]

Oh, and guys... sometimes I'm on Skype. My skype is sir_lawrence_vapormoon.
My Facebook is SirLawrence VaporMoon.
Let's see how long it will be until they catch that name!
If you were on my facebook, I had to redo it all because they automatically listed me as a company. So just send a friend request. Love to hear from you all.

 

[tnt56]

Most important thing is. THERE IS NO SUCH THING AS A STANDARD PLAIN SABER TOUCH!!!!!!
Sir Lawrence makes each one himself. They are all special and very unique in their form.
Each one is special and has a personality with it.
(Sorry Sir Lawrence but my saber is special at least to me )
And when are you going to get my new midi ready. It's Thunder time in Oklahoma.
Bahahahahahahahahahah

 

[Sir_Lawrence]

LOL! Yes, each one is uniquie, for sure!
There are 1,000's of combinations, and I'm sure I've made each combination! Or at least it seams like it!

 

[Sir_Lawrence]

have you all come down to the realization that sometimes a good marriage just doesn't work?
I have tried so hard to keep my marriage going. But I guess with age, a lot of things are either left out or forgotten.
I haven't forgotten them, but my partner has.
I only say this publicly since you people in the vape community are my friends, and hope.

 

[Credo]

Sadly it's the good relationships (50give/50take, 100share, seemingly rock solid (till one day they're just gone), responsible, AND fun) I can never manage to keep going.

It's the horribly one-sided not even solicited or encouraged by myself relationships (give/give/get-punished for it/give some more/get sued for even more/constant slander) that I can't GET RID OF!

Hang in there tho'...and RUN FORREST RUN!!!

 

[Sir_Lawrence]

Yea... run Forest... Run!
I like that!

 

[Credo]

Sir Lawrence,
Just an idea...

So far I haven't seen any plans to make a DNA20d 'can/extension'.

Would your shop set-up allow you to make something that could hold a DNA20d board and just screw into the 510 connection as a Saber extension?

It might be worth looking into the possibility since as far as I can tell no one else is offering one. It could screw on all sorts of mods

In brainstorming I can think of all sorts of possible shapes and sizes...simplest being some sort of clear thing with a male 510 on one end and female 510 on the other (kind of like your voltage boxes, but with a dna board inside instead)...and of course the fanciest being a mini Saber tube with cutouts for the display and whatever buttons/switches/pots are chosen.

Just an idea...

 

[Sir_Lawrence]

Branden from Evolv and I chat all the time. We are looking at something in the future that may blow away everything! But don't quote me on that!

 

[Sir_Lawrence]

Sir Lawrence,
Just an idea...

So far I haven't seen any plans to make a DNA20d 'can/extension'.

Would your shop set-up allow you to make something that could hold a DNA20d board and just screw into the 510 connection as a Saber extension?

It might be worth looking into the possibility since as far as I can tell no one else is offering one. It could screw on all sorts of mods

In brainstorming I can think of all sorts of possible shapes and sizes...simplest being some sort of clear thing with a male 510 on one end and female 510 on the other (kind of like your voltage boxes, but with a dna board inside instead)...and of course the fanciest being a mini Saber tube with cutouts for the display and whatever buttons/switches/pots are chosen.

Just an idea...

And please, email me your ideas!

 

[VaporClouds]

Hello, i won the mod envy sabertouch last night on mod envy.
First, thank you very much for giving one of them away. I cant wait to get it and it looks awesome.
I was wondering, for the mod envy version of sabertouch if i can use Efest IMR 18650 batterys with button top and 3.7v
Efest IMR18650 2000mah - button top - 101 Vape

Thats a link to the batterys i was thinking of getting for it.

 

[tnt56]

Hello, i won the mod envy sabertouch last night on mod envy.
First, thank you very much for giving one of them away. I cant wait to get it and it looks awesome.
I was wondering, for the mod envy version of sabertouch if i can use Efest IMR 18650 batterys with button top and 3.7v
Efest IMR18650 2000mah - button top - 101 Vape

Thats a link to the batterys i was thinking of getting for it.

Personally I use AW brand for almost all my mods. I do have a few Efest that serve me well.

 

[Sir_Lawrence]

Just an update...
Guys, bare with me. I've been in N.C. all week having my major lathe rebuilt.
I should be returning back early tomorrow for my 7 hour drive.
I know there are a ton of emails from you all and I will get to them as soon as I return.
Please, Understand. No way to make my products with a lathe that doesn't work.
Thanks.