Vaporshark DNA200

[Charlemagne]

SteveAdams86, It isn't to difficult. I just followed the instructions on evolvapor.com. There is a thread in their forum titled Mac support. If your messing with Linux and familiar with it you will understand it more than I do.
Its gonna take me a while to dial in my mod with escribe as I am up to my ears in schoolwork, and wont enjoy the full benefits of escribe until late October. Although, I still need to figure out how to play with the dna board itself lol. I just built a 0.37ohm 26ga double coil, and I am impressed. Keeping it at default settings for now to establish a baseline. Working beautifully! The VS200 is just about a 1/2" taller than my eGrip and 1/8" thicker.

 

[jazzvaper]

how hard is it to set up escribe on a mac? i have a feeling im going to be helping a friend set it up on his. Iv alreaday done it in a virtual machine within linux but havent yet been able to test if it fully works as i dont have have the mod to connect to it

Piece of cake, nothing to it. Just remember to install the "Guest Additions", since without that you will not see the DNA (Dimension Engineering) on the USB.

 

[sd3614]

I would like to see a pic with a Uwell Crown, unless I missed one already.

 

[maleasdf]

Could anyone with VS DNA200 and a weighing scale please provide an exact weight of the mod .. I keep hearing it is light, but also not too light, very confusing and just on the edge. The exact weight info could help me decide.. thanks in advance..

 

[Daisychainvaper]

*bookmark* as I just ordered one. 20% off... comes out as free shipping for me lol.

 

[SteveAdams86]

SteveAdams86, It isn't to difficult. I just followed the instructions on evolvapor.com. There is a thread in their forum titled Mac support. If your messing with Linux and familiar with it you will understand it more than I do.
Its gonna take me a while to dial in my mod with escribe as I am up to my ears in schoolwork, and wont enjoy the full benefits of escribe until late October. Although, I still need to figure out how to play with the DNA board itself lol. I just built a 0.37ohm 26ga double coil, and I am impressed. Keeping it at default settings for now to establish a baseline. Working beautifully! The VS200 is just about a 1/2" taller than my eGrip and 1/8" thicker.

thanks il check that thread out, i guess i should spend some more time at the evolv forum to find out about these things!

Piece of cake, nothing to it. Just remember to install the "Guest Additions", since without that you will not see the DNA (Dimension Engineering) on the USB.

i have already got escribe running fine and got the guest additions and really happy with my windows virtual machine within ubuntu, i was asking because my friend owns a mac and isnt the most patient guy when it comes to computers so i might need to help him and i have 0 mac experience and barely used apple products later than ipod lol

 

[jazzvaper]

thanks il check that thread out, i guess i should spend some more time at the evolv forum to find out about these things!



i have already got escribe running fine and got the guest additions and really happy with my windows virtual machine within ubuntu, i was asking because my friend owns a mac and isnt the most patient guy when it comes to computers so i might need to help him and i have 0 mac experience and barely used apple products later than ipod lol

1. Download VB 5, expand, and install.

2. Click the "New" button in VB and select the correct Win OS, e.g., Microsoft/Windows 7, 8, 8.1, choose the Win media install location.

3. D/l the Guest Additions, double-click to install. Be sure the "Settings" menu is properly configured, particularly Shared Folder and USB.

4. With Windows running and DNA connected observe the VB Menu for "Devices" to check USB-> demensionengineering on the USB.

5. "Start" Windows, d/l eScribe, open eScribe, plug the DNA200 in, expect to hear a Windows sound confirmation.

Configure to your hearts content...

 

[HopHead]

Could anyone with VS DNA200 and a weighing scale please provide an exact weight of the mod .. I keep hearing it is light, but also not too light, very confusing and just on the edge. The exact weight info could help me decide.. thanks in advance..

Mine weighs 170.2 grams

 

[hadid10]

My VS came in last Thursday. Nice texture to it, my first DNA and Vaporshark product. Well my first high wattage box device and have got to say it is tiny! Pleasantly surprised! Been using it sparingly in the evenings. Last night I setup escribe on my Mac, and will post again after I dial down a good vape and get more acquainted as the weekend comes and goes.

So a mac version is available?


Sent from my iPhone using Tapatalk

 

[Paul.K]

Could anyone with VS DNA200 and a weighing scale please provide an exact weight of the mod .. I keep hearing it is light, but also not too light, very confusing and just on the edge. The exact weight info could help me decide.. thanks in advance..

Mine weighs 6.0 oz. In comparison my rdna weighs 7.4 oz.

 

[Paul.K]

I would like to see a pic with a Uwell Crown, unless I missed one already.

 

[sd3614]

Which coils? How's your battery life doing?

I'm afraid at 90 watts this thing will be done in 1.5 hours

 

[Paul.K]

Which coils? How's your battery life doing?

I'm afraid at 90 watts this thing will be done in 1.5 hours

I'm using .15 ni coils @ 70 watts 480f. I can get about 2 tanks til I have to charge it.

 

[kalison]

My favorite part about the form factor:

 

[Dobo]

 

[chief63]

I don't think I could live with that battery life.

 

[SteveAdams86]

I don't think I could live with that battery life.

i bet it can last a reasonable amount of time if you reduce the preheat to something like 40w. Also bear in mind if you own an android phone use can charge this in all the same places as it has micro usb charging. Also bear in mind with zip charging from a 2 amp source this will take 90 minutes to charge instead of 3-5 hours using 1 amp like every other dna 200. Even if the battery isn't as big as others you should be able to use this more because the charging rate is that much faster. Get your self a 10,000 mah power bank with a 2.1 amp port and then you don't need to worry

 

[Paul.K]

If this was my only device it would be hard bc of the lack of battery capacity. Even so I only vape during break times at work so I could have it fully charged in between. On a side note this works great on lemo 2 and crown tanks. Not so well on the vortice rda. Keeps popping out of tc.

 

[chief63]

i bet it can last a reasonable amount of time if you reduce the preheat to something like 40w. Also bear in mind if you own an android phone use can charge this in all the same places as it has micro usb charging. Also bear in mind with zip charging from a 2 amp source this will take 90 minutes to charge instead of 3-5 hours using 1 amp like every other dna 200. Even if the battery isn't as big as others you should be able to use this more because the charging rate is that much faster. Get your self a 10,000 mah power bank with a 2.1 amp port and then you don't need to worry

Yeah, I get it, but right now there are cheaper, more convenient options. I can already do that with my DNA40 in a smaller package. Think I'll sit on the fence a bit and wait for the next generation.

 

[Smeef]

I'm using .15 ni coils @ 70 watts 480f. I can get about 2 tanks til I have to charge it.

That's it? About two tanks? That doesn't seem right. Even with preheat set high for a short period of time, one would think more than two tanks would be reasonable.