Vaptio Palo Kit

[Frenkyou]

The new Vaptio Palo is an All In One device with a capacity of 2 ml, produced by the Chinese company based in Seattle in the United States where they have been active since 2014, this product joins as a Mtl / Dl device to the very famous Vaptio Tyro, Tyro Nano and Cosmo; these last have smaller coils of different types which however have the advantage of being interchangeable with those of the nautilus.
The new Palo coils are a new concept and promise well in terms of duration.

The Vaptio Palo is supplied in a white cardboard box with a window on the product.

On the front we find the brand, the name of the product and the usual warnings on the nicotine content, in reality there is no nicotine, this is the usual Chinese misunderstanding.

The back side shows: the content, the warnings in 7 languages, the address of the manufacturer, a bar code and the usual warning about the nicotine content.

Package Contents:
1 x POLE
1 x Coil PALO A1 0.6Ω
1 x Coil PALO A2 1.2Ω
1 x glass tube
1 x user manual
1 x USB cable

Specifications:
Dimensions: 19 mm x 124.3 mm
Bypass mode output
Tank capacity 2 ml
1500mAh internal battery
Output power: 8 - 23W

The Vaptio Palo is available in 6 different color options and I must say that the gradient color style is quite eye-catching.

The drip-tip has only one sealing ring and is a bit of a dancer but it can be replaced with any 510 tip.

To access the refill just push the top cap down and turn it a quarter of a turn, here we also see the generous silicon gasket with which the Top-Cap is equipped.

The air-flow is double and is placed at the top, it is completely adjustable from mtl with 3 small holes to dtl with wide slot + holes.

Once the top-cap is removed, you can access the refill slots.
The All in one tank is not replaceable with other atomizers and has a capacity of 2ml, in the package we find a replacement glass.

 

[Frenkyou]

The new A1 and A2 coils are of considerable size and have well-proportioned liquid inlet holes, promise good durability, their main feature is the junction to the top through a silicone chimney, this junction depending on the coil on which it is mounted it has a diffuser hole of different section, wider on the smaller 0.6Ω on the 1.2Ω, the diffuser is however interchangeable thus giving us a further choice on the adjustment of the shot.
The 0.6Ω Coil A1 has a nichrome wire, the 1.2Ω A2 in steel.

The silicone part of the coil (chimney) and its joint.

The bottom of the pole with the vent hole of the 1.500mAh battery.

How does it work

The Fire button is slightly raised and well positioned on the Vaptio Palo, it has an LED light that surrounds it, to facilitate localization without looking.

Turning the device on and off simply requires 5 clicks and a red light will flash around the button on both occasions.

Charging the Vaptio Palo Kit is simple, connecting the USB cable on the side, the light around the power button flashes white while charging and switches to a solid white light when the device is fully charged.

The Palo is equipped with Pass-Trough and can possibly be vaped while in office.

Since the Pole is a by-pass device, it is worth remembering that each coil will work with a different power
The A1 coil operates between 18w and 23w.
The A2 coil operates between 8w - 12w.
The power depends on the battery itself; to get the upper end of these numbers you need to have the battery fully charged.
The power goes down as the battery charge decreases.

The Vaptio Palo with the new coils and its widely adjustable top air regulation system, can work both in MTL and in DTL with a minimum power of 8W and a maximum power of 23 watts depending on the coil you are using.

Also thanks to the air adjustment at the top this device is completely free of liquid leaks, even the top-cap closing / opening is fast and safe, protected from accidental drawbacks, the pull is fluid with both coils.

Pro:

- Basically the Vaptio Palo is a well-built mod / aio pen style.

- It is pocket-sized, not from a shirt pocket but certainly for any other pocket.

- The fire button is comfortable and of good quality

- The upper airflow, as Vaptio states, is leak-proof.

- The glass tube clearly shows the liquid level.

- The top-cap can be easily and safely removed for filling.

- The airflow ring offers ample adjustment

- The Palo has a good equipment is supplied with two coils and a spare glass.

- Low consumption of liquid both in Mtl and in Dtl

- Good 1.500mAh battery life

- Good performances both in Mtl and in DTL

Versus:

- Drip-Tip Dancer

Final Considerations

The Vaptio Palo promotes it because it was not easy to change the type of coil to keep up with the Tyro and Cosmo kits (established devices) that use a super-tested and effective type of coil, not only did it hold the comparison but it "almost won" , I say almost because on the one hand I find the fact that it is impossible to have losses better, on the other hand compared to the old coils of the cosmos and the aromatic tyro we have a substantial draw which is already a great result, in terms of duration could be even higher seeing how they are built, but this only time can confirm it.

Would you recommend it?
I really think so because the Palo kit I think is reliable and very suitable for the beginner, in some respects even better than the previous ones (excellent) Cosmo and Tyro, great Vaptio!

I thank Vaptio for sending this product free of charge:
PALO Kit

VaptioOfficial: