Various GG videos

[SSRob]

I finally got around to making some simple GG videos.

Nothing in depth at this time, but some handy videos demonstrating how to remove, adjust and re-install the button as well as adding a few upgrades. I'll do something more in depth later.

Check them out at YouTube - VaporKings's Channel

 

[imeothanasis]

I finally got around to making some simple GG videos.

Nothing in depth at this time, but some handy videos demonstrating how to remove, adjust and re-install the button as well as adding a few upgrades. I'll do something more in depth later.

Check them out at YouTube - VaporKings's Channel

very very clear, useful and slow videos Rob, understandable from everyone, thanks a lot friend!!.
I just want to make a small correction about the thin ring that keeps the button in place. You screw it too much. It needs to screw it only one time and about 1/8 of a full circle (that is the half of a quarter) or less
All the other prosedure was like I was doing it! I also noticed that your fingers are almost the same as mine. My wife said exactly the same when she saw yours. They are almost identical xaxaxa

 

[SSRob]

In America we sometimes say "your mileage may vary"

I didn't tighten the lock ring at all by finger so that is why I make so many turns with the pliars.

 

[imeothanasis]

In America we sometimes say "your mileage may vary"

I didn't tighten the lock ring at all by finger so that is why I make so many turns with the pliars.

I see! Ok then I agree. So first we tight this ring by hand and then a very small turn with pliers

 

[sob80sup81]

Hi Rob, i saw the atomizer installation video and i find that you can push the center pin effortlessly, i find my GGTS's center pin to be pretty hard to push and pull, any suggestion to make it easier to adjust?

Thanks

 

[vapn]

Your center pin has the leak fix I am assuming and that makes the center pole stiff. There are orings inside there keeping juice from entering the battery compartment.

EXCELLENT videos Rob! This should answer any questions about how to install these updates (Upgrades, excuse me). I find the atomizer cap video very helpful as we are seeing many people over tightening the TS thinking the center pole is not touching. By installing atties with this method there is no reason to over tighten the TS. Thanks for doing these videos!

 

[imeothanasis]

Hi Rob, i saw the atomizer installation video and i find that you can push the center pin effortlessly, i find my GGTS's center pin to be pretty hard to push and pull, any suggestion to make it easier to adjust?

Thanks

yes friend. Put a drop of oil inside the place where center pole moves or just unthread a little the polygonal brass nut

 

[mre5674]

Rob,

Have you been getting my contact emails I've sent through your website?! I've sent a couple with no reply, and you're usually quick to respond...Just want to make sure you're getting them!

Best - Mr.e

 

[Stormynights]

I just love Rob and Michelle. They are the greatest.

 

[JBTX1]

Rob...Very helpful videos! Another outstanding example of great customer service for the best products on the market!.....On a different note: We need the new iattys and the new AFS bad!!!!!!!!!....Sorry, I'm trying to be patient....sigh***

 

[lawnman3]

is there a bottom hole on the ggts ... for the bottom switch option ? on the newer ggts models that is the question ? anyone that ownes a newer ggts could awnser this would be great .. tthanks in advance lawnman3

 

[JBTX1]

lawnman...No.

 

[imeothanasis]

is there a bottom hole on the ggts ... for the bottom switch option ? on the newer ggts models that is the question ? anyone that ownes a newer ggts could awnser this would be great .. tthanks in advance lawnman3

Hole is already there law my friend. The only I have to do is to make a front button, nothing more. But no time!!!!!

 

[JBTX1]

OK maybe I'm missing something here....I have a brand new GGTS and the bottom end cap by the switch end has 3 small vent holes but no hole in the center of the bottom end cap.....What am I missing?

 

[ella]

Excellent videos, thank you!

 

[vapn]

OK maybe I'm missing something here....I have a brand new GGTS and the bottom end cap by the switch end has 3 small vent holes but no hole in the center of the bottom end cap.....What am I missing?

You are not missing anything. There was some mention of having this option a while back but that was scrapped. There is not a hole in the bottom of the TS for the button.

 

[JBTX1]

LOL...Ok thanks!...thought I was losing my mind!...again

 

[imeothanasis]

LOL...Ok thanks!...thought I was losing my mind!...again

When I say that the hole exists I mean that the hole is the threaded one that front cap is screwed. If I make a button like Slim then we can upgrade the GGTS with a front button too, its a very easy prossedure.

Just imagine a more fat Slim JB

 

[JBTX1]

OK....I see where you going with it now. Thanks Imeo.

 

[imeothanasis]

OK....I see where you going with it now. Thanks Imeo.

anytime friend