I'm so done with this rda. I regret buying it. I need to fix it somehow. My veritas tastes like metal. Every flavor I put into it tastes disgusting. Shoulda got a patriot... it was a pain to build a sleeper build on it. Any ideas on how to fix this problem?
Veritas.... ugh gross.
- Thread starter JayPahp
- Start date
- th_trl_thread_readers 0
- Status
next time you need to supply more info as we can ask you questions but you can't answer them! So assuming your not going to low on your resistance and are using some sort of Mech. I'd build the coil with a1 kanthal 26 ga 7 wraps around a 3mm bit will give you a total resistance of about 5 ohms. Use organic cotton. I'd torch your wire before using it or dry burn it with out the wick. When you wick it don'
t make the cotton to tight. Should slip through the coil easily. Also I"d wash the rda good with a mix of dish soap and ammonia to degrease it. Rinse well let dry. Might even want to torch the parts that do not have plastic on them like the base. Use high vg juice when you can if that does not fix it try someone's rda and see if you taste it then. Try a diff drip tip to. next time if you want better help provide more info. Would have helped to know what resistance what wick what wire the turn count and what the thing is on top of.
t make the cotton to tight. Should slip through the coil easily. Also I"d wash the rda good with a mix of dish soap and ammonia to degrease it. Rinse well let dry. Might even want to torch the parts that do not have plastic on them like the base. Use high vg juice when you can if that does not fix it try someone's rda and see if you taste it then. Try a diff drip tip to. next time if you want better help provide more info. Would have helped to know what resistance what wick what wire the turn count and what the thing is on top of.
- Status
Similar threads
