Very disappointed with fluxomizer

[jersey girl]

Hi,

I received my fluxomizers today. Ordered them with 808 threaded to use with the remaining batteries I have with that threading.

It did not look like the picture on the suppliers web site. No inter plug, filled, no vapor, two mouthfuls of juice and it was empty.

Refilled, let it sit, tried it on other brand batteries ....Same thing happened.

Don't want any more mouthfuls of juice.

What am I doing wrong?

O' and the wick seperated into many strings?????

 

[Stef64]

It may be leaking at the battery connector end. Did you try any of the other fluxos in the pack?

 

[jersey girl]

No I did not try any of the other ones as they are sealed in their package.

And felt that if I were doing something wrong, I would just repeat the mistake.

I don't believe it was leaking at the battery, I checked and the bottom is dry.

So I am at a loss. I think all the juice went in my mouth.

 

[sailorman]

Did you take the plug out of the top?
Did you use the mouthpiece that was included, or another one?
I don't know what you mean by an "inter-plug". There should be a one-piece silicone plug sitting on top of the ceramic cup that holds the coil. It's in there pretty tight, but you don't need to take it out or off. You don't even need to touch it. You'll see that it has 2 flat sides. Not the sides the wicks are on, but the other sides. Those flats create a space where you put a needle in to fill them.
Fill them to just below the bottom of the ceramic cup. Screw them on, maybe tip them horizontal for a few seconds, and vape.
I have cleaned my oldest ones 3 or 4 times now and the very ends of a couple of the wicks have separated a little bit. No big deal. They're a tiny bit long anyway, but it doesn't seem to cause any problem.

 

[jersey girl]

I did not take the plug out.
I used the mouthpiece that came with them.
There is a white plug i guess with a tube sticking out the center. A slit on each side of that near outer casing.
I slid the needle down that slit and fill to the top. Tilted it upside down for a few seconds and then tryed to vape.
Experienced what I stated in post.

O" and there is nothing to screw on, just the mouth piece which fits tightly.

 

[Smiley0515]

is the battery getting a good connection?? you said no vapor...do you mean absolutely none or very little?? i would try a 2nd one and see if you still have a problem. there are ways to adjust the length of the post i believe so it can make a better battery connection if the 2nd one doesnt work. but hey just my

If you get it to work but experience a burning flavor, there are ways to possibly fix that. i actually just made a thread regarding this.

 

[Oneida]

I slid the needle down that slit and fill to the top.

Sounds like you overfilled it. As Sailorman said, fill them to just below the bottom of the ceramic cup. Filling them to the top will flood the coil so that the juice can't be vaporized and you'll also definitely wind up with juice in your mouth.

 

[Smiley0515]

Sounds like you overfilled it. As Sailorman said, fill them to just below the bottom of the ceramic cup. Filling them to the top will flood the coil so that the juice can't be vaporized and you'll also definitely wind up with juice in your mouth.

yup, the one thing i have never had a problem with regarding those is juice in my mouth. Yuck.

 

[jersey girl]

Sounds like you overfilled it. As Sailorman said, fill them to just below the bottom of the ceramic cup. Filling them to the top will flood the coil so that the juice can't be vaporized and you'll also definitely wind up with juice in your mouth.

I am not sure if I overfilled, as I only filled 3/4's of the way or so I thought.
Tryed it on my pt and got burnt vapor.
I know so many people enjoy these, but I am sorry I even tryed them.

 

[jersey girl]

I filled another one same way and it seems fine.

I tossed the first one, maybe it was defective.

Thanks for your help