VERY strange experience....

[weaponX]

So I was taking a draw this evening and all of the sudden there was a pulling or reverse suction coming from my ce2...baffled, I switched attys to my genesis....same thing....then switched pvs...same thing....tried changing batteries....got the same result.....still getting vapor when I pull harder, but the vapor will stay down in the coil instead of floating upward. th is almost non existent.

I am clueless, has anyone else experienced this?

 

[Animeguy]

maybe air is not getting in tank as fluid is being used so it creates a vacuum?

 

[weaponX]

good thought...tried with a 510 atty...same stuff

 

[Animeguy]

Hmmm your pv seems to defy physics lol

 

[BlueMoods]

My 510's do that IF I manage to clog the little air vents at the connector. Yes it can be done with lint form a pocket, dirt from hands if working in the garden for example, or as I most often accomplish, making brad and vaping, thus having dough on my hands and it clogging my e-cig LOL. Clean the poor thing and see if that helps.

 

[porkchopsisgood]

I've gotten this as well, but only on my 5V box mod w/a 510 atty. I notice it happens when the atty gets dry and the coil start to overheat...but that might be coincidental, dunno. My degree in physics is still in the mail, where I suspect it'll stay.

Consider ECF my science correspondence course...

 

[weaponX]

My 510's do that IF I manage to clog the little air vents at the connector. Yes it can be done with lint form a pocket, dirt from hands if working in the garden for example, or as I most often accomplish, making brad and vaping, thus having dough on my hands and it clogging my e-cig LOL. Clean the poor thing and see if that helps.

yep...definitely was an airflow issue. thx blue

 

[Bijou]

Sure it's not a paranormal phenom thingy?

 

[Pantry Weevil]

I am not familiar with those models, but there needs to be some type of "void" that allows air into the system. I use 808's and the little holes on a battery got clogged and didn't allow air to flow freely. You would have to draw so hard your ears would practically pop. Check for clogged ports.

 

[Stevew443]

I chalk this up as a mystery since the dawn of creation.

Just thinking about this though, I find it a bit odd. You are heating a liquid to create a vapor. That would cause the vapor to expand in the atomizer. That expansion would create a positive pressure in the atomizer, and the cart which would tend to push the vapor out. The only way one could form a vacuum is if the liquid expanded and due to pressure of cooling then condensed quickly which would form the vacuum, but if that happened, he would get no vapor. So, after careful consideration of all things I will stick to my original thought... mystery from the dawn of creation.