I have been using a Kato Square clone for a long time with a kayfun and have been loving it, but wanted to try something different and the Kanger Subtank looked pretty cool to me so I took the plunge. I also got the Kbox with it since the price point is so low. I think they look great together as well. I have always used a high VG liquid in my kayfun, which sometimes I had to prime a few times to get it to wick ok but otherwise no problems. Does anyone know what the recommended VG/PG% is for the Subtank with the OCC coils? Thanks guys!
VG% for Kanger Subtank
- Thread starter PyreLight
- Start date
- th_trl_thread_readers 0
- Status
I currently have around 65% vg in the subtank mini using the stock coils and its been great.
I reckon a higher vg would be fine.
The rba section is another matter , smaller juice holes , that one I'm still figuring out , seem to be needed to vape at a lower wattage.
I reckon a higher vg would be fine.
The rba section is another matter , smaller juice holes , that one I'm still figuring out , seem to be needed to vape at a lower wattage.
I've been running 100% vg with the stock 0.5ohm occ coil with no issues. Wicks just fine.
I have more than one running OCC's with max VG and so far they work just fine. I'm not pushing very high wattage though. Using .5-ohm OCC at 9 or 10 watts. Vapor is very good. Not sure what would happen at 20+ watts.
The recommended PG/VG ratio is that ratio you like best. I would reduce Nicotine content in proportion to vapor output. The more steam you make the less nic you generally need in the juice. You can also use more or less VG to adjust throat hit. Regardless of wattage and ohm of build, I generally vape at less than 200 heatflux and above 75. Or on the cooler side of vaping. I find juice with more than 40% VG are to gunky and sweet for me. Preference is 70pg/30vg.
I am using 6mg 70% vg with the .5 OCC coil in the mini at 20watts with the Kbox , no issues at all 
with my Melo and the Kamry at .5 ohm im at 23 watts 100%vg, and with my nano and the Kamry at .8 im at 19 watts 100% vg
I'm running 65/35 and 80/20 with no problems. I have tried both stock coils and worked great.
I have a mini subtank too..and just not much vapor as I get with the V2s with any ohm coil and I used high vg to all vg....I've tried it..at different settings..and am less than pleased with it.
I'll tried it with other mods than my istick 20 & 30..and Ed's vapor flask..same deal.
I'll probably up it up for trade/sale here soon I'm tired of fiddling with it.
I'll tried it with other mods than my istick 20 & 30..and Ed's vapor flask..same deal.
I'll probably up it up for trade/sale here soon I'm tired of fiddling with it.
What tanks are V2's? I've seen Busardo using one, and it seems to put out a lot of vapor but I don't know what company makes them. Do you have a link? I'm surprised you don't think the subtank puts out enough vapor. Even with the 1.2 coil at like 12 watts on a iStick 20 watt, the thing pumps it out for me. Granted that 12 watts is probably more than that because of the funky Vmean or whatever that the chip uses but the tank has massive airflow. Problem is the OCCs don't last very long at all (compared to my old Nautilus) and are expensive.
I firmly recommend and am supported by mounds of scientific evidence I just made up, that the perfect PG/VG concentration is... whatever you like. That's right, the KST can handle whatever you put in it from 0% VG to 100% VG.
Do what you like brah.
Do what you like brah.
Thats what I figured. I had this guy at my shop tell me not to buy 100% VG juice. He knew I was using a KST. Who knows, anyway thanks for the info, its good to know.
90% VG with a 0.5ohm coil at 30 watts vapes well. No dry hits on either the Subtank or the mini.
Funnily enough that seems to work with the 1.2 ohm coils too......
Have to lung hit though, mouth to lung is much too hot for me.
Funnily enough that seems to work with the 1.2 ohm coils too......
Have to lung hit though, mouth to lung is much too hot for me.
I run my Kanger Mini .5 at 25 watts and I find if I chain vape I can't run VG over 80%. It doesn't seem to wick fast enough with the thicker VG.
- Status
Similar threads
- Locked
