Vision Spinner 3 flashes

[bloodless2010]

Okay so I have 2 vision spinners, one of them works fine.. the other one flashes 3 times and stops? It keeps doing this. I don't think it's the charge because it would flash like 10+ times if it was that, and I'm not screwing it on too tight because I've loosened it, and it does it with multiple tanks.. why is it doing this? :c

 

[Stosh]

The 3 flashes are indicating a short, and as you say it happens with multiple tanks i's more likely the center pin pushed down. If you take a toothpick or small screwdriver and pry up the center pin, very carefully and very gently, it may solve your issue. It should only need to be lifted very slightly, to cure the short.

 

[bloodless2010]

The 3 flashes are indicating a short, and as you say it happens with multiple tanks i's more likely the center pin pushed down. If you take a toothpick or small screwdriver and pry up the center pin, very carefully and very gently, it may solve your issue. It should only need to be lifted very slightly, to cure the short.

The thing is though, my center pin ins't one of those moveable ones like in the CE4/CE5 ones... The protank center pin doesn't move vertically at all

 

[Stosh]

Gently lift the center pin on the Vision Spinner, that's likely what's shorted if it's happening on multiple tanks.