VTR reading 0.0 ohm after about a week (but still works)

[pomme]

Hello,

First post for me. Unfortunately it is to report that my one week old VTR reads 0.0 ohms (sometimes) on all my clearos.

The odd thing is that it works fine even though the bad reading.

I use it in power mode and can really confirm that moving from 7 to 15 watts makes a difference while the ohms are shown as 0.0.

Sometime after a 0.0 vape, it shows a correct reading then I click again and it reads 0.0. Sometimes, the reading if off by about 25% and a minute later it shows either 0.0 or a good value.

Tried new atomizer and still have the issue.

Experiencing the issue with iclear 30s or any of my Aspire ET-S bdc (btw: can't wait to try the new aspire bvd in them).

Any idea?

 

[serenity21899]

Hello,

First post for me. Unfortunately it is to report that my one week old VTR reads 0.0 ohms (sometimes) on all my clearos.

The odd thing is that it works fine even though the bad reading.

I use it in power mode and can really confirm that moving from 7 to 15 watts makes a difference while the ohms are shown as 0.0.

Sometime after a 0.0 vape, it shows a correct reading then I click again and it reads 0.0. Sometimes, the reading if off by about 25% and a minute later it shows either 0.0 or a good value.

Tried new atomizer and still have the issue.

Experiencing the issue with iclear 30s or any of my Aspire ET-S bdc (btw: can't wait to try the new aspire bvd in them).

Any idea?

Contact the vendor where you purchased it to get a new one or a repair.

 

[pomme]

I did and we agreed that i would try a new IMR battery today first.

In other detail, sometimes, when reading 0 ohm it does not fire, sometimes, the green light will stay on after not firing. Workaround so far was to either turn the unit off or change power settings.

 

[AstroTurf]

Yeah it's broken.

Safety says: don't vape on a broken device.

But, to each their own.

Be careful, Jim

 

[serenity21899]

When the VTR came out originally about a year ago, the ring by the 510 connection spun and sometimes caused an issue with erratic ohm readings. The issue was since fixed by Innokin. I bought one from an online vendor that had the issue immediately. I returned it and bought one from another vendor that worked fine. I bought a second one off the classiefied and it was okay until about a month ago when I got the erractic ohm readings.

A local vendor repaired it by securing the ring and swapping out the 510 connection for a FatDaddy one. He also took it upon himself to sand out the dings on it and clear coated it. The second one also was secured and the 510 replaced as a preventive measure.

My only point is, the mod is 2 weeks old and doesn't work. Return it and save yourself more hassle down the road.

 

[pomme]

the vtr actually shorted inside and smelt pretty bad after, it is now on its way to the store for a replacement

 

[AstroTurf]

Glad you caught it before it vented a battery!