whats a good variable voltage box mod that i want have to give a arm and leg for? i would like something that holds a bottle.
vv box mod
- Thread starter chadtw
- Start date
- th_trl_thread_readers 0
-
- Tags
- apollo lavatube madvapes revolution
- Status
You could try a search in the forums for the Evercool mod. I have been reading on that and just got in all the parts...most free samples from a link in that thread. I seem to remember someone talking about or doing a feed on one of those also. Maybe Krimson Kustoms, not sure of the website though.
Ron -
Ron -
I believe Old Goat is making mods again. And I think I saw where he was making or could make a vv bottomfeeder. I assume since you said you wanted one that could hold a bottle, a bottom feeder was what you were alluding to. Even so he can make most anything you want and at a good honest price. Plus if/when something goes wrong with it he will fix it. Great guy! Shot him an email.. tell him what you want and see what he says.
oldgoat20@hotmail.com
Here is a link to a supplier thread where you can post a question.
ahh, here it is.http://www.e-cigarette-forum.com/fo...ncredible-price-old-goat-bottomfeeders-8.html post #75
oldgoat20@hotmail.com
Here is a link to a supplier thread where you can post a question.ahh, here it is.http://www.e-cigarette-forum.com/fo...ncredible-price-old-goat-bottomfeeders-8.html post #75
Last edited:
That depends on what you call an arm and a leg. If you're wanting a VV bottom feeder you're looking at upwards of $100 and more like $150. If you just want VV, the Madvapes VV box mod is the cheapest. I think for a little more the Smoketek Varicool is a better deal for battery life.
The old goat vv bottom feeder is $50 including shipping! He's a respected builder and services what he sells. He said he would make a limited number each month for sale. Great Deal! Info link in my post above He's also selling a simple 3.7 bottom feeder with a led that lights up the whole mod for $20 shipped! A great little mod to give away to friends to try vaping.
He's also selling a simple 3.7 bottom feeder with a led that lights up the whole mod for $20 shipped! A great little mod to give away to friends to try vaping. 
Try this one, I love mine!!!
http://www.e-cigarette-forum.com/fo...discussion/306579-smoktek-com-vv-box-mod.html
http://www.e-cigarette-forum.com/fo...discussion/306579-smoktek-com-vv-box-mod.html
The Smoktek box uses the OKR-T6 (also known as the "Evercool") regulator, which so far is the best VV regulator we currently use to mod with in terms of power and reliability.
but it still costs $50.
but it still costs $50.
Exactly!!! Doesn't cost an arm and a leg, yet vapes like a champ!!
That's just about everything. You have to go hunting for anything else.
The Max Box has everything you want, and for a reasonable price ($85, Maximum Vapors).
Link: The Max Box
Link: The Max Box
how bout the woodie iis it better? I dont mind paying for a nice good working mod..
Unless I've missed something, none of the MaximumVapors' VV Woodies is a bottom feeder. All of us who've responded to your original post have interpreted your statement that you want "something that holds a bottle" as meaning that you're looking for a VV feeder mod, but maybe you don't really care about that. Maybe you meant just storage space for a bottle of juice, so you don't have to carry it separately.
Alas, none of MaximumVapors' Woodies has that either, but they are very nice. I have a V1 Woodie evercool VV, and I like it a lot. The V1s are smaller, thicker, and a slightly more ergonomic fit in the hand (mine at least), while the V2s are taller and slightly slimmer---but all the Woodies are well made and beautiful. With a 5ml carto tank, you're good for all day.
Hi Bill, I also have a V1 Woodie from MaxVapors, and mine works great, but unfortunately I had problems with it right out of the box. The one divider inside was misplaced, and wouldn't hold a bat right out of the gate (too narrow). I had to shave it down with a box cutter to get my left bat in. That worked, though that side is still really tight. I didn't want to shave too much at the ends where the wires run, and inadvertently cut a wire. Over time, the sharp edges ripped up the shroud on the bat I run in that side. I will say the circuit in it is solid, and it vapes like a champ though. And the bat life is incredible. MaxVapors has a new box supplier now, so it may no longer be a problem.
Apollo has a deal going right now on original VTubes (Lavatubes). You can use coupon code "Vtube30" to get 30% off and shipping is free. That deal will get you a black, red, or silver Vtube body only, for $38.47. You can get a chrome (but not Stainless Steel) for $45.47. Then just try what Bill recommended, and throw a tank on the bad boy.
Single Apollo VTube
With any of these original Lavatube type devices, you need to use a 3 ohm or greater carto to be able to actually use the entire voltage range they are capable of. That wouldn't be an issue with the Maximum Vapors product.
Single Apollo VTube
With any of these original Lavatube type devices, you need to use a 3 ohm or greater carto to be able to actually use the entire voltage range they are capable of. That wouldn't be an issue with the Maximum Vapors product.
hificat,
Sorry to hear about your hassles. Late last year during some major sales at MaximumVapors, I bought four 5V boxes and 1 evercool box. Turned out that all of them would drain the batteries within 1-2 days, whether I used them or not.
Todd determined that the hot glue he'd been using to seal everything was slightly conductive, causing the battery drain, and he offered to repair them for me. I waited and waited and finally mailed them off a month ago. They're in the post now being shipped back. I feel sort of bad about waiting so long to return them for repair, but Todd hasn't complained (or charged me anything).
Birthing pains, you know? A new vendor getting his sea legs. Or so I hope, for Todd's sake. LOL. And yes, those evercool regulators he uses do indeed vape like champs. I don't know if the ones in our V1s are the 6 amp models, but they work brilliantly anyway.
Yep Todd is certainly still getting his legs under him, but I'm fairly certain he'll get it under control eventually. I kind of wish he had offered to fix or replace my v1 Woodie. The way the whole thing shook out, I basically sent him an email telling him about it, and also telling him I thought I could fix it with a razor blade. The door on mine also has a crack on the hinge side, and the hinge rattles really bad. Mine certainly doesn't have a problem with loosing charge. It's been sitting unused for about 2 weeks in the bottom of my vaping case (with bats in it), and I just picked it up and pushed the button and it vapes like a champ. Just wish it didn't tear up the shrouds on bats.
i know theres more than monkey box,rio,revolution out there anymore mod box out there? i want something that feeds with a bottle of juice,hits hard,vv that i can turn up and smoke and that will last.
Red Sky Mods, The Gripper at Sweetvapes...Search the forum for the Wooderman. There are several one man shops that are making wooden boxes on this forum. I haven't kept up with them.
- Status
