VVVVVVVVVAAAAAMMMMMMOOOOOOOOOOO v2

[daniel22811]

Okay dudes and dudettes, I've heard in the vast and empty grapevine, that people cannot fit kanger T3s clearomisers in there Vamo's?

Well, out of curiosity I just wipped out my old kanger T3S and screwed it into my Vamo V2 ss, and lo and behold, she works!

I believe I read somewhere that they do now have enough room to get any airflow down into the skirt thingy, but mine does. Heaps actually.

Do I have a pretend vamo?

 

[unseenme]

If I'm not mistaken, Vamos are produced by a number of different mfgs. I have a black chrome V2 from FT and it doesn't have ego threading (I assume you used an adaptor to connect the T3) so I can't even install a T3 on my V2. I'm not sure what you're calling a 'pretend' Vamo, but if it has the 'face' it's pretty much a Vamo.

*sent from a Galaxy not so far away*

 

[daniel22811]

Okay well mine does have ego threading! On the posty thing that stick out in the middle. The posty thing that is the 510 connectio , the base of that has ego threading. Even the joye ego c atomizers and tank things screw onto it and fire.

 

[Jaiofspam]

they fit on ss vamo v2's

 

[unseenme]

Guess they showed more love to the ss Vamos

*sent from a Galaxy not so far away*

 

[daniel22811]

Awesome! Glad I got the stainless verson then!

It is a bit silly though how the ss now seems to have more features then the chrome ones. Why should chrome miss out?

 

[Osaton]

The problem with T3's isn't fitting them onto Vamo, but rather taking them off. The connection between individual parts of the T3 is weaker than that between the T3 and Vamo, so unless you're really careful when removing the T3, you have a good chance of taking off the glass tank and spilling juice all over yourself.

 

[daniel22811]

Oooh right, that makes sense I can easily see how that could happen. Caution must be taken then.

 

[crxess]

If people payed attention and attached devices as they should, those things would not happen.

SNUG IT CONTACT

No clearomizers coming apart - No crushed center pins - No stripping threads
Fight mod abuse

 

[SirSteve]

My black chrome V2 has the ego threading, but the opening is too narrow for the Kangers. I got this in December, and I believe that since then some of the V2's have fixed that problem. Apparently the SS has fixed it, but I thought some of the chrome ones were updated as well.

As previously mentioned, Vamo is made by more than one company and in more than one factory. Probably helps to explain why my Black Chrome finish still looks new, and others wear off. Also may explain why I never had treading problems and others do, not to mention the few people who got Vamo's with two different style small buttons. I wish we knew who made what, so we would know which ones to avoid.

 

[WizardOfVape]

I have 2 vamos, each from a different vendor. One is gun metal and the other stainless. Both accept the t3. There was talk that Kanger modified the base of the t3 but I may have just been lucky to get modified vamos. I still like to use the adapter just to avoid juice spill when removing

Sent from my SGH-M919 using Tapatalk 4 Beta

 

[jarreddizzle]

My Vamo V2 I have works fine with T3's but its easier to use if you have the middle converter thing (510-9XX???)

 

[BostonJim]

I have a Vamo, black chrome, no issues with the T3 (s) at all. Like others said I only screw the T3s down till it makes contact with the pin. But I never cranked anything down on anything. Force and electronics are not very compatible.

 

[christeymg]

I have 2 Vamo V2s. My black one will accept any tank or clearomizer. The stainless steel one I bought of the classifieds here will only take the Vivi Novas and the iClear 30s. The clearance isn't enough on the SS one to allow the base of a Kanger or an Evod to fit.

What kind of adapter could I buy so I could use those? They're a little confusing and I'm a newbie.

 

[WizardOfVape]

You'll want to get the ego-510 adapter

http://www.smoktek.com/assets/images/ego-510-connector_wm.jpg

 

[christeymg]

You'll want to get the ego-510 adapter

http://www.smoktek.com/assets/images/ego-510-connector_wm.jpg

Perfect! thanks

 

[_sidekick_]

I never knew that the VAMO was produced by different people. Are there certain vendors that supply the "good" ones? I don't want to end up with one that isn't going to work with all or at least most tanks.